DC gear motor with wheel
محرك TT معشق DC 3-6V مع عجلة مطاطية لسيارة الروبوت | TT Gear Motor with Rubber Wheel for Smart Robot Car, DC 3-6V
محرك TT معشق DC 3-6V مع عجلة مطاطية لسيارة الروبوت | TT Gear Motor with Rubber Wheel for Smart Robot Car, DC 3-6V — 3,800 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Runs on 3-6V DC
- 1:48 gear ratio raises torque
- Double-sided shaft
- Rubber wheel about 65mm in diameter
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,800IQDIts price has held at 4,750 IQD for the last 11 days.
About this item
TT geared DC motor, 3-6V, with a rubber wheel, made for educational robot cars and 2WD and 4WD chassis.
A small DC motor with a plastic gearbox (ABS housing with plastic gears) and a plastic wheel with a rubber tyre about 65mm in diameter, so you get a motor and wheel ready to mount without buying a separate wheel. It runs on 3-6V DC with a 1:48 gear ratio, the standard ratio for a TT motor, which lowers the speed and raises torque so the car moves slowly and steadily and is easy to control.
The shaft is double-sided with a half-round profile, so the wheel can go on one side and a speed encoder disc on the other. No-load speed is about 200 rpm at 6V, and no-load current is about 120-150mA, rising sharply under load. Connection is through two metal terminals for soldering wires directly, and it is compatible with 2WD and 4WD smart car chassis.
To control it you need an H-Bridge motor driver that handles direction and speed with a PWM signal; the listing names the L298N, L293D and TB6612 drivers. It warns against powering the motor straight from the board pins because startup current exceeds what they can supply, so use a separate power source with a common ground and add a protection diode against reverse voltage.
It is new with a 1 months warranty, and the box contains one TT gear motor with a rubber wheel.
Suitable for
- Educational robot cars
- Ready-made 2WD and 4WD chassis
- Arduino and ESP32 motion-control projects
Seller's description
محرك تيار مستمر صغير مزوّد بصندوق تروس بلاستيكي وعجلة مطاطية جاهزة للتركيب، وهو المحرك القياسي في مشاريع سيارات الروبوت التعليمية. يخفض صندوق التروس السرعة ويرفع العزم فتتحرك السيارة ببطء منتظم يسهل التحكم به، ويخرج المحور من الجانبين فيمكن تركيب عجلة أو قرص تشفير سرعة. يعمل مباشرة مع مشغلات المحركات الشائعة.
أبرز المزايا
- يعمل ضمن مدى 3-6V DC ويلائم بطارية 4×AA أو خلية ليثيوم مع منظم
- صندوق تروس بنسبة تعشيق 1:48 نموذجياً يرفع العزم على حساب السرعة
- محور مزدوج الجانبين يسمح بإضافة قرص تشفير لقياس السرعة
- يأتي مع العجلة المطاطية فلا تحتاج شراء وتركيب عجلة منفصلة
- يتوافق مع مشغلات L298N و L293D و TB6612 والدروع الجاهزة
- جسم خفيف بفتحات تثبيت تناسب شاسيهات 2WD و4WD الجاهزة
الاستخدامات الشائعة
- سيارات الروبوت التعليمية بنظام تتبع الخط أو تجنب العوائق
- مشاريع Arduino و ESP32 للتحكم بالحركة عبر PWM
- نماذج أولية لمنصات متحركة خفيفة الحمل
ملاحظة: لا تغذِّ المحرك من أرجل اللوحة مباشرة، فتيار الإقلاع وذروة الحمل يسحبان أكثر مما تحتمله. استخدم مشغل محركات مع مصدر طاقة منفصل وأرضية مشتركة، وأضف ديود حماية ضد الجهد العكسي.
What's in the box
محرك TT معشق واحد مع عجلة مطاطية
Specifications
| Motor type | DC مع صندوق تروس (Gear Motor) |
|---|---|
| Operating voltage | 3-6V DC |
| Gear ratio | 1:48 |
| No-load speed | نحو 200 دورة/دقيقة عند 6V |
| Wheel | قطرها نحو 65mm |
| Compatibility | شاسيهات السيارات الذكية 2WD و4WD |
| التيار بلا حمل | نحو 120-150mA ويرتفع كثيراً عند الحمل |
| المحور | مزدوج الجانبين بمقطع نصف دائري |
| مادة الصندوق | بلاستيك ABS مع تروس بلاستيكية |
| طريقة التوصيل | طرفان معدنيان للحام الأسلاك مباشرة |
| طريقة التحكم | PWM عبر مشغل H-Bridge للاتجاه والسرعة |
| Category | Robotics, Drones & Industrial Automation |
| More categories | Motion-control systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0558 |




