Lithium charger module

وحدة شحن خلية ليثيوم واحدة بتيار 1A بمدخل Micro USB | Single-Cell Lithium Battery Charger Module 1A, Micro USB Input

⁨وحدة شحن خلية ليثيوم واحدة بتيار 1A بمدخل Micro USB | Single-Cell Lithium Battery Charger Module 1A, Micro USB Input⁩ — ⁨2,338 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Charging current up to 1A
  • 4.2V cut-off for a single cell
  • Micro USB input at 5V DC
  • CC/CV curve with automatic stop
  • Two LEDs for charging and complete
2,338IQD2,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

2,338IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Charging module for a single lithium cell with up to 1A current and a Micro USB input, for 18650, 21700 and Li-Po projects.

This is a small charging board for a single 1S lithium cell, with a charging current of up to 1A and a Micro USB input at 5V DC. The 4.2V cut-off is set for one lithium-ion cell, and the compatible chemistries are Li-ion and Li-Po with a nominal voltage of 3.7V.

The board follows a CC/CV charging curve, constant current and then constant voltage, with automatic stop when charging completes. Two LED indicators show charging and completion without any measuring tools. According to the listing, the 1A current suits cells of 1000mAh and above.

Connection is through two solder pads for the battery terminals. Uses the listing mentions include adding a charging port to 18650, 21700 and Li-Po projects, a small home-made power bank, and wireless lights and sensors that run on one cell. It is small and easy to mount inside a project box.

Important limits: the board is for a single cell only and is not suitable for 2S or 3S packs or LiFePO4 cells, because it cuts off at 4.2V. Watch the polarity when connecting, since reversing the battery damages the charging chip immediately and may heat the board.

The box holds one charging board, and the product is new with a 1-month warranty.

Suitable for

  • Adding a charging port to 18650, 21700 and Li-Po projects
  • Building a small single-cell power bank
  • Wireless lights and sensors running on one cell

Seller's description

لوحة شحن صغيرة لخلية ليثيوم أيون واحدة تعمل بمدخل 5V عبر منفذ Micro USB وتعطي تيار شحن يصل إلى 1A. تتبع منحنى الشحن القياسي بتيار ثابت ثم فولتية ثابتة حتى 4.2V ثم تتوقف، وتبيّن الحالة بمؤشري LED للشحن والاكتمال. هي الحل الأبسط لإضافة منفذ شحن إلى أي مشروع يعمل بخلية 18650 أو Li-Po.

أبرز المزايا

  • تيار شحن يصل إلى 1A مناسب لخلايا 1000mAh فأعلى
  • فولتية قطع 4.2V مضبوطة لخلية ليثيوم أيون واحدة
  • منحنى شحن CC/CV كامل مع إيقاف تلقائي عند الاكتمال
  • مؤشرا LED لمتابعة حالة الشحن بلا أدوات قياس
  • حجم صغير يسهل تثبيته داخل أي علبة مشروع

الاستخدامات الشائعة

  • إضافة منفذ شحن لمشاريع 18650 و 21700 و Li-Po
  • باور بانك صغير الصنع محلياً
  • مصابيح ومجسّات لاسلكية تعمل بخلية واحدة

ملاحظة: اللوحة مخصصة لخلية واحدة فقط ولا تصلح لحزم 2S و3S لأنها تقطع عند 4.2V. راقب اتجاه القطبين عند التوصيل، فعكس البطارية يتلف شريحة الشحن فوراً وقد يسخن اللوح.

What's in the box

لوحة شحن واحدة لخلية ليثيوم بتيار 1A

Specifications

Number of cellsخلية واحدة 1S
Charging currentحتى 1A
Cut-off voltage4.2V
Input voltage5V DC
Input portMicro USB
Compatible chemistryLi-ion و Li-Po بجهد اسمي 3.7V
منحنى الشحنتيار ثابت ثم فولتية ثابتة CC/CV
المؤشراتمؤشرا LED للشحن والاكتمال
طريقة التوصيلوسادتا لحام لطرفي البطارية
القيودلا تصلح لحزم 2S و3S أو لخلايا LiFePO4
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesBattery chargers
ConditionNew
Warranty1-month warranty
SKUNTK-0576

Questions about وحدة شحن خلية ليثيوم واحدة بتيار 1A بمدخل Micro USB | Single-Cell Lithium Battery Charger Module 1A, Micro USB Input

It currently costs 2,338 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
No. The listing states it is for a single cell only and unsuitable for 2S and 3S packs because it cuts off at 4.2V.
A Micro USB port with a 5V DC input.
No. The listing says it is not suitable for LiFePO4 cells; the compatible chemistries are Li-ion and Li-Po.
Through two solder pads for the battery terminals, taking care with polarity.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.