GenericFast charger module
وحدة شحن سريع Type-A و Type-C بقدرة 2x140W تدعم بروتوكولات PPS-PD3.0-PD2.0 | Fast Charger Module
وحدة شحن سريع Type-A و Type-C بقدرة 2x140W تدعم بروتوكولات PPS-PD3.0-PD2.0 | Fast Charger Module — 21,375 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Output of up to 140 watts through USB-C
- 6 to 30 volt DC input
- Supports PD 3.1/3.0 and QC 5.0/4.0
- Over-voltage and short-circuit protection
- New, with a 1 months warranty
Ask about stock or request a better price
Price
21,375IQDIts price has held at 22,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
Fast charger module for DIY electronics at 2x140W with output of up to 140 watts through USB-C and a 6 to 30 volt input.
The 2x140W fast charger module is an electronic part for DIY projects that converts direct current (DC) into charging power. The description mentions output of up to 140 watts through a USB-C port, which makes it suitable in principle for charging laptops and phones that support fast charging, as long as the device being charged supports the matching protocol.
The module covers the PD 3.1/3.0, QC 5.0/4.0, Huawei SCP/FCP and Oppo VOOC protocols, and its input works from 6 to 30 volts DC, so it can be fed from batteries or solar panels. To reach 140 watts the description recommends an external power source of 24 volts with sufficient amperage, meaning the supply must be able to deliver the power required.
It has an output for a cooling fan that runs automatically above 50 degrees Celsius, plus protection against over-voltage, under-voltage and short circuit. Make sure the terminals are connected correctly before powering on, since reversed polarity can damage electronic parts. The description mentions using it to build desktop charging stations or to modify car chargers.
The condition is new, and the warranty is 1 months against manufacturing operating defects, excluding misuse. The box holds one piece, and the SKU is NANO-XD662EDF10C7.
Suitable for
- Building a desktop charging station
- Modifying a car charger
- Powering from batteries or solar panels
Seller's description
وحدة الشحن السريع 2x140W متعددة البروتوكولات
تعتبر وحدة الشحن السريع هذه حلاً متطوراً للمهتمين بمشاريع الإلكترونيات الذاتية (DIY)، حيث تتيح تحويل التيار المستمر (DC) إلى طاقة شحن فائقة السرعة. تم تصميم هذه اللوحة لتوفير مخرجات تصل إلى 140 واط عبر منفذ USB-C، مما يجعلها قادرة على شحن الحواسيب المحمولة والهواتف الذكية المتطورة بكفاءة عالية.
تتميز الوحدة بدعمها الواسع لمختلف بروتوكولات الشحن السريع العالمية، بما في ذلك PD 3.1/3.0 وQC 5.0/4.0، بالإضافة إلى أنظمة شحن Huawei SCP/FCP وOppo VOOC. تعمل اللوحة ضمن نطاق جهد إدخال يتراوح بين 6 إلى 30 فولت تيار مستمر، مما يمنحك مرونة كبيرة في اختيار مصادر الطاقة، سواء كانت بطاريات أو ألواحاً شمسية.
لضمان استقرار الأداء أثناء العمل تحت ضغط عالٍ، تم تزويد اللوحة بمخرج خاص لتوصيل مروحة تبريد تعمل تلقائياً عند ارتفاع درجة الحرارة عن 50 درجة مئوية. كما تتضمن اللوحة أنظمة حماية متكاملة ضد ارتفاع الجهد، انخفاضه، وقصر الدائرة الكهربائية، مما يوفر أماناً عالياً لأجهزتك أثناء عملية الشحن.
المميزات التقنية والتشغيل
- قوة الشحن: مخرجات تصل إلى 140 واط عبر منفذ USB-C.
- دعم البروتوكولات: PD 3.1/3.0، QC 5.0/4.0، Huawei SCP/FCP، وOppo VOOC.
- نطاق الجهد: يعمل بجهد إدخال من 6 إلى 30 فولت تيار مستمر.
- نظام التبريد: مخرج مخصص لمروحة تبريد تعمل تلقائياً عند 50 درجة مئوية.
- أنظمة الحماية: حماية ضد ارتفاع الجهد، انخفاض الجهد، وقصر الدائرة.
للحصول على أقصى أداء بقدرة 140 واط، يوصى باستخدام مصدر طاقة خارجي بجهد 24 فولت مع تيار أمبير كافٍ. هذه الوحدة مثالية لبناء منصات شحن مكتبية احترافية أو تعديل شواحن السيارات لتصبح فائقة السرعة، مع ضرورة التأكد من توصيل الأقطاب بشكل صحيح قبل التشغيل.
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من Type-A and Type-C High Power 2x140W All Protocol Desktop Fast Charger Module Buck Converter for PPS-PD3.0-PD2.0 Power Supply.
Specifications
| Brand | Generic |
|---|---|
| Power | مخرجات تصل إلى 140 واط عبر منفذ USB-C |
| Protocols | PD 3.1/3.0، QC 5.0/4.0، Huawei SCP/FCP، وOppo VOOC |
| Input voltage | من 6 إلى 30 فولت تيار مستمر |
| Cooling | مخرج مخصص لمروحة تبريد تعمل تلقائياً عند 50 درجة مئوية |
| الموديل أو اسم القطعة | Type-A and Type-C High Power 2x140W All Protocol Desktop Fast Charger Module Buck Converter for PPS-PD3.0-PD2.0 Power Supply |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Battery chargers |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XD662EDF10C7 |




