Continuous rotation servo motor
سيرفو موتور SG90 مايكرو 9g بدوران مستمر 360 درجة | SG90 9g Micro Continuous Rotation Servo Motor 360°
سيرفو موتور SG90 مايكرو 9g بدوران مستمر 360 درجة | SG90 9g Micro Continuous Rotation Servo Motor 360° — 3,400 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Continuous 360 degree rotation in both directions
- Speed and direction by PWM, not angle
- Weighs 9 grams, runs on 4.8V to 6V
- Only 3 wires: GND, VCC and Signal
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,400IQDIts price has held at 4,250 IQD for the last 11 days.
About this item
Micro SG90 servo with continuous 360 degree rotation, where a PWM signal sets speed and direction instead of angle, suited to small robot wheels.
This is the continuous-rotation version of the micro SG90 servo: the mechanical stop was removed and the position feedback disconnected, so a PWM signal controls rotation speed and direction instead of angle. A pulse width near 1.5ms stops the motor, and the further the pulse moves from that value the faster it turns in one direction or the other. The signal period is one pulse every 20ms (50Hz).
It weighs 9 grams with a built-in plastic gearbox and runs on 4.8V to 6V DC. The drive circuit is inside, so it can be driven straight from a controller pin without a motor driver. It has 3 wires: brown GND, red VCC and orange Signal, and the Servo library in Arduino supports it by writing a speed value.
Understand the difference from a normal servo before buying: this type does not know its position and cannot be told to stop at a specific angle. If it does not stop completely at the neutral pulse, adjust the small calibration screw or correct the value in software. It suits small robot wheels, line-following cars, conveyor belts, winding and pulling mechanisms and student projects.
It is new with a 1 months warranty, and the box holds one continuous-rotation SG90 servo with mounting horns and screws.
Suitable for
- Driving robot and line-following car wheels
- Conveyor belts and slow continuous rotation
- Winding and pulling mechanisms in models
Seller's description
نسخة الدوران المستمر من السيرفو المصغّر SG90، حيث أُزيل الحد الميكانيكي وفُصلت التغذية الراجعة للموضع، فصارت إشارة PWM تتحكم بسرعة الدوران واتجاهه بدل الزاوية. عند عرض نبضة قريب من 1.5ms يتوقف المحرك، وكلما ابتعدت النبضة عن هذه القيمة زادت السرعة في أحد الاتجاهين. خيار عملي لتحريك العجلات الصغيرة والأحزمة الناقلة.
أبرز المزايا
- دوران مستمر في الاتجاهين بلا حد للزاوية.
- التحكم بالسرعة والاتجاه بإشارة PWM قياسية واحدة.
- وزن 9g فقط مع علبة تروس مدمجة تصلح للروبوتات الصغيرة.
- يعمل بتغذية من 4.8V إلى 6V ويُقاد مباشرة من منفذ متحكم.
- يغني عن إضافة درايفر محركات لأن دائرة القيادة مدمجة داخله.
- ثلاثة أسلاك فقط: الأرضي والتغذية والإشارة.
الاستخدامات الشائعة
- تحريك عجلات الروبوتات الصغيرة وسيارات التتبع.
- الأحزمة الناقلة والمشاريع التي تحتاج دوراناً بطيئاً متواصلاً.
- آليات اللف والسحب في النماذج والمجسمات.
- مشاريع الطلبة التي تحتاج محركاً بسيط التحكم بلا درايفر.
ملاحظة: هذا السيرفو لا يعرف موضعه، فلا يمكن أمره بالوقوف عند زاوية محددة. وإن لم يتوقف تماماً عند النبضة المحايدة فاضبط برغي المعايرة الصغير أو صحّح القيمة برمجياً.
What's in the box
سيرفو موتور SG90 بدوران مستمر واحد مع أذرع التثبيت والبراغي
Specifications
| Motor type | سيرفو بدوران مستمر Continuous Rotation |
|---|---|
| Rotation range | 360 درجة مستمرة في الاتجاهين |
| Operating voltage | 4.8V إلى 6V DC |
| Weight | 9 غرام |
| Wire order | بني GND وأحمر VCC وبرتقالي Signal |
| طريقة التحكم | PWM يتحكم بالسرعة والاتجاه لا بالزاوية |
| النبضة المحايدة | نحو 1.5ms لإيقاف الحركة |
| دورة الإشارة | نبضة كل 20ms (50Hz) |
| نوع التروس | بلاستيكية |
| التغذية الراجعة | لا يوجد استشعار للموضع |
| المعايرة | برغي ضبط لنقطة التوقف المحايدة |
| الدعم البرمجي | مكتبة Servo في Arduino بكتابة قيمة السرعة |
| Category | Robotics, Drones & Industrial Automation |
| More categories | Motion-control systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0270 |




