Motor driver module
وحدة قيادة محرّكات MX1508 بقناتين وتيار 1.5 أمبير | MX1508 Dual-Channel DC Motor Driver Module, 1.5A
وحدة قيادة محرّكات MX1508 بقناتين وتيار 1.5 أمبير | MX1508 Dual-Channel DC Motor Driver Module, 1.5A — 3,000 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- MX1508 chip with two channels
- Up to 1.5 amps per channel
- 2 – 9.6 volt DC operating range
- Very small and light
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,000IQDIts price has held at 3,750 IQD for the last 11 days.
About this item
Small MX1508 motor driver module with two channels, 1.5 amps per channel and 2 – 9.6 volts, for small robots and Arduino projects.
A small motor driver module built on the MX1508 chip that drives two DC motors or one stepper motor at up to 1.5 amps per channel. Operating voltage is 2 to 9.6 volts DC, speed is controlled by a PWM signal plus two direction signals, and there are 4 control input pins.
The listing describes it as the smaller, cheaper alternative to the L298N module for small projects that do not need high current, with a lower voltage drop and higher efficiency than it. It is very compact and light, so it suits miniature robots, line-following robots, Arduino teaching carts and small stepper driving.
Operating tip: the chip heats up in continuous operation near its limit, so keep the continuous current below the 1.5 amp per channel limit with some margin or add simple cooling. For higher currents the listing points to the L298N as the larger alternative.
It is new with a 1 months warranty, and the box holds one MX1508 driver module.
Suitable for
- Small line-following robots
- Arduino teaching carts
- Driving small stepper motors
Seller's description
وحدة قيادة محرّكات صغيرة مبنية على رقاقة MX1508 تقود محرّكين مستمرين أو محرّكاً خطوياً واحداً بتيار حتى 1.5 أمبير لكل قناة. تتحكم بالاتجاه والسرعة عبر إشارات PWM مباشرة من الميكروكونترولر، وهي البديل الأصغر والأرخص لوحدة L298N الشهيرة في المشاريع الصغيرة التي لا تحتاج تياراً عالياً.
أبرز المزايا
- قناتان مستقلتان للتحكم بمحرّكين
- تيار حتى 1.5 أمبير لكل قناة
- حجم صغير جداً ووزن خفيف يناسب الروبوتات المصغّرة
- تحكم بالسرعة والاتجاه عبر PWM
- كفاءة أعلى وهبوط فولتية أقل من L298N
الاستخدامات الشائعة
- روبوتات تتبّع الخط الصغيرة
- عربات Arduino التعليمية
- قيادة محرّكات خطوية صغيرة
- مشاريع الأتمتة المصغّرة
ملاحظة: الرقاقة تسخن عند التشغيل المستمر قرب حدها الأقصى؛ ابقَ تحت أمبير واحد لكل قناة في التشغيل الطويل أو أضف تبريداً بسيطاً.
What's in the box
وحدة قيادة محرّكات MX1508 واحدة
Specifications
| Chip | MX1508 |
|---|---|
| Maximum current per channel | 1.5 أمبير |
| Operating voltage | 2 – 9.6 فولت تيار مستمر |
| Control method | PWM للسرعة وإشارتان للاتجاه |
| Supported motors | محرّكان مستمران أو محرّك خطوي واحد |
| Input pins | 4 أطراف تحكم |
| عدد القنوات | قناتان |
| الحجم | مدمج جداً |
| البديل الأكبر | L298N للتيارات الأعلى |
| الاستعمال النموذجي | الروبوتات الصغيرة ومشاريع Arduino |
| Category | Robotics, Drones & Industrial Automation |
| More categories | Motion-control systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0914 |




