Motor driver module
وحدة قيادة محركات L9110S بجسر H مزدوج مع حماية حرارية | L9110S Dual H-Bridge Motor Driver Module with Overheat Protection
وحدة قيادة محركات L9110S بجسر H مزدوج مع حماية حرارية | L9110S Dual H-Bridge Motor Driver Module with Overheat Protection — 3,800 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- L9110S chips with independent channels
- 2.5V to 12V DC supply
- 800mA continuous per channel
- Logic compatible with 3.3V and 5V
- Internal thermal protection
Ask about stock or request a better price
Price
3,800IQDIts price has held at 4,750 IQD for the last 11 days.
About this item
Small module with L9110S chips and independent H-bridges, 2.5V to 12V supply and 800mA per channel with thermal protection.
A small motor driver board carrying L9110S chips, giving independent H-bridges to run DC motors in both directions or one 4-wire stepper motor. Operating voltage is 2.5V to 12V DC, continuous current is 800mA per channel, and peak current is up to 1.5A for short periods.
The logic level is compatible with 3.3V and 5V, so it can be driven from an ESP32 or an Arduino, and it has four control pins that accept PWM for speed. It includes internal thermal protection and suits 3.7V batteries and AA packs, according to the listing. Connections are screw terminals for the motors with a header for control, and it is small and light.
Watch the limit: do not exceed 800mA per channel, and check the motor's stall current before connecting, since it can reach several times the running current and either trip the thermal protection or damage the board. It suits small robot cars and line-following carts, toy motors and miniature geared motors, and one small 4-wire stepper.
It is new with a 1 months warranty, and the box holds one L9110S driver board.
Suitable for
- Small robot cars and line-following carts
- Toy motors and miniature geared motors
- Running a small 4-wire stepper motor
Seller's description
لوحة قيادة محركات صغيرة تحمل شريحتَي L9110S، فتوفر جسرَي H مستقلين لتشغيل محركَي تيار مستمر في الاتجاهين أو محرك خطوي واحد بأربعة أسلاك. تعمل بفولتية من 2.5V إلى 12V وتيار مستمر يصل إلى 800mA لكل قناة، وتحتوي حماية حرارية داخلية. حجمها الصغير واستهلاكها المنخفض يجعلانها الخيار الأنسب للروبوتات الصغيرة.
أبرز المزايا
- شريحتان L9110S تعطيان قناتين مستقلتين بجسر H لكل منهما
- فولتية تشغيل واسعة من 2.5V إلى 12V تناسب بطاريات 3.7V وحزم AA
- تيار مستمر 800mA لكل قناة مع ذروة أعلى لفترة قصيرة
- متوافقة مع مستويات المنطق 3.3V و5V فتُقاد من ESP32 أو Arduino
- حماية حرارية داخلية ضد ارتفاع درجة الحرارة
- حجم صغير ووزن خفيف مناسب للعربات الصغيرة
الاستخدامات الشائعة
- السيارات الروبوتية الصغيرة وعربات تتبع الخط
- التحكم بمحركات الألعاب ومحركات الترس المصغرة
- تشغيل محرك خطوي صغير بأربعة أسلاك في المشاريع التعليمية
ملاحظة: لا تتجاوز 800mA لكل قناة؛ افحص تيار انحباس المحرك stall current قبل التوصيل لأنه قد يبلغ أضعاف تيار التشغيل ويوقف اللوحة عبر الحماية الحرارية أو يتلفها.
What's in the box
لوحة قيادة محركات L9110S واحدة
Specifications
| Driver chip | L9110S × 2 (جسر H مزدوج) |
|---|---|
| Operating voltage | 2.5V إلى 12V DC |
| Continuous current per channel | 800mA |
| Peak current | حتى 1.5A لفترات قصيرة |
| Logic level | متوافق مع 3.3V و5V |
| عدد القنوات | قناتان مستقلتان |
| أنواع المحركات المدعومة | محركا DC أو محرك stepper بأربعة أسلاك |
| الحماية | حماية حرارية داخلية |
| مداخل التحكم | أربعة أطراف تحكم تقبل PWM للسرعة |
| التوصيلات | أطراف براغي للمحركات وهيدر للتحكم |
| Category | Robotics, Drones & Industrial Automation |
| More categories | Motion-control systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0397 |




