Power bank module

كارت باور بانك 22.5W لبطاريات LiFePO4 3.2V يدعم QC4.0 وPD3.0 وVOOC | 22.5W Power Bank Module for 3.2V LiFePO4 Battery with QC4.0 PD3.0 VOOC

⁨كارت باور بانك 22.5W لبطاريات LiFePO4 3.2V يدعم QC4.0 وPD3.0 وVOOC | 22.5W Power Bank Module for 3.2V LiFePO4 Battery with QC4.0 PD3.0 VOOC⁩ — ⁨12,500 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Output up to 22.5W
  • Made for 3.2V LiFePO4 cells
  • Supports QC4.0, PD3.0 and VOOC
  • Short-circuit, over-charge and deep-discharge protection
  • LED battery level indicators
12,500IQDIn stock
1

Ask about stock or request a better price

Price

12,500IQD

Its price has held at 12,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

22.5W power bank board for 3.2V LiFePO4 cells, supporting QC4.0, PD3.0 and VOOC, for people building their own power bank.

This card is an electronic board for building a power bank; it is not a ready-made power bank. It is designed for LiFePO4 chemistry with a 3.2V cell voltage and delivers up to 22.5W of output with fast-charging support, with charge and discharge current up to 5A.

The board supports QC4.0/QC3.0/QC2.0, PD3.0/PD2.0 and VOOC protocols, so it covers a wide range of phone fast-charging standards. Efficiency is high in both the charging and boost stages, it has LED indicators for battery level, and it protects against short circuit, over-current, over-charge and deep discharge.

It is a single-cell 1S design, and cells can be paralleled to raise capacity. The listing names 32650, 32700 and other cylindrical LiFePO4 cells as suitable. The B+ and B- battery pads are on the face of the board, and the compact board fits ready-made power bank cases.

An important warning from the listing: the card is for 3.2V LiFePO4 cells only. Do not connect it to 3.7V lithium-ion cells because the end-of-charge voltage is different. Check B+ and B- polarity before soldering and use wire thick enough for 5A.

Uses the listing mentions include a home-built power bank, backup power for a router and small devices, and small portable solar systems. The board is new and the box holds one power bank board; the warranty is 1 month. The listing does not give the board dimensions in numbers or the type of output port, so ask the shop through chat if that matters to you.

Suitable for

  • Building a home-made LiFePO4 power bank
  • Backup power for a router and small devices
  • Small portable solar systems

Seller's description

لوحة باور بانك جاهزة بقدرة 22.5W مصممة للعمل مع خلايا ليثيوم فوسفات الحديد LiFePO4 بفولتية 3.2V، تجمع في كارت واحد بين شاحن الخلية ومحول رفع الفولتية إلى الخرج ودوائر الحماية ومؤشرات مستوى الشحن. تدعم بروتوكولات الشحن السريع الشائعة مثل QC4.0 وPD3.0 وVOOC، فتتيح بناء باور بانك منزلي بخلايا 32650 أو 32700 بعمر دورات أطول وأمان حراري أعلى من خلايا الليثيوم أيون.

أبرز المزايا

  • مصمم خصيصاً لكيمياء LiFePO4 بفولتية خلية 3.2V
  • قدرة خرج تصل إلى 22.5W مع دعم الشحن السريع
  • يدعم بروتوكولات QC4.0/QC3.0 وPD3.0/PD2.0 وVOOC
  • تيار شحن وتفريغ يصل إلى 5A بكفاءة تحويل عالية
  • مؤشرات LED لبيان مستوى شحن البطارية
  • حمايات مدمجة ضد القصر والتيار الزائد والتفريغ العميق

الاستخدامات الشائعة

  • بناء باور بانك منزلي بخلايا LiFePO4 مقاس 32650 و32700
  • مصادر طاقة احتياطية للراوتر والأجهزة الصغيرة
  • أنظمة الطاقة الشمسية المحمولة الصغيرة
  • مشاريع الشحن السريع والتغذية المتنقلة

ملاحظة: هذا الكارت مخصص لخلايا LiFePO4 3.2V فقط؛ لا تربطه بخلايا ليثيوم أيون 3.7V لأن فولتية نهاية الشحن مختلفة. تأكد من قطبية B+ وB- قبل اللحام واستخدم سلكاً بمقطع كافٍ لتيار 5A.

What's in the box

لوحة باور بانك واحدة بقدرة 22.5W لبطاريات LiFePO4

Specifications

Battery chemistryLiFePO4 بفولتية خلية 3.2V
Output powerحتى 22.5W
Max currentحتى 5A
Fast-charge protocolsQC4.0/QC3.0/QC2.0، PD3.0/PD2.0، VOOC
Suitable cells32650 و32700 وخلايا LiFePO4 الأسطوانية
Connection pointsB+ و B- للبطارية على وجه اللوحة
عدد الخلاياخلية واحدة 1S (يمكن توازيها لزيادة السعة)
الكفاءةعالية في مرحلتي الشحن والرفع (Boost)
المؤشراتلدات لبيان مستوى شحن البطارية
الحماياتقصر، تيار زائد، شحن زائد، تفريغ عميق
الاستخدامتصنيع باور بانك أو مصدر احتياطي صغير
الحجملوحة مدمجة تناسب علب الباور بانك الجاهزة
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesBattery chargers
ConditionNew
Warranty1-month warranty
SKUNTK-0509

Questions about كارت باور بانك 22.5W لبطاريات LiFePO4 3.2V يدعم QC4.0 وPD3.0 وVOOC | 22.5W Power Bank Module for 3.2V LiFePO4 Battery with QC4.0 PD3.0 VOOC

It currently costs 12,500 IQD from Nanotik on SinaaStore (updated 16 November 2026).
No. The listing states the card is for 3.2V LiFePO4 cells only because the end-of-charge voltage of 3.7V cells is different.
QC4.0/QC3.0/QC2.0, PD3.0/PD2.0 and VOOC, according to the listing.
No, it is a board for building a power bank; the box holds one board only, without a battery or case.
The listing names 32650, 32700 and other cylindrical LiFePO4 cells.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.