Brushless motor controller
لوحة تحكم بمحركات البرشلس DC بقدرة 500W وتيار 15A من 12V إلى 36V | DC 12V-36V 500W 15A Brushless Motor Controller Driver Board (20A Peak)
لوحة تحكم بمحركات البرشلس DC بقدرة 500W وتيار 15A من 12V إلى 36V | DC 12V-36V 500W 15A Brushless Motor Controller Driver Board (20A Peak) — 25,250 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 500W with 15A continuous and 20A peak
- 12V to 36V operating voltage
- Speed and direction control
- Over-current and over-temperature protection
- New, with a 1-month warranty
Ask about stock or request a better price
Price
25,250IQDIts price has held at 25,250 IQD for the last 11 days.
About this item
Controller board for brushless DC (BLDC) motors rated 500W with 15A continuous and 20A peak on 12V to 36V, controlling speed and direction.
A controller board for brushless DC (BLDC) motors rated 500W with 15A continuous current and 20A peak, running on 12V to 36V. It controls the motor's speed and direction of rotation, with speed set by a variable resistor or an analog signal. The listing notes that brushless motors do not turn without a controller board like this one.
The listed protections are over-current and over-temperature, and the listing recommends ventilation or a heat sink at high load. Typical use is in pumps, machines, robots, small electric carts and industrial fans, and in upgrading old machines with brushless motors.
The most important check before buying is the motor type: the listing says some boards are designed for motors with Hall sensors and will not drive a sensorless motor, and vice versa, and that it suits motors with or without Hall sensors depending on the type. So confirm that your motor type matches the board, and ask the shop through chat which type this exact board is, since the listing does not specify.
The box holds one brushless motor controller board only, with no motor or power supply. It is new with a 1 months warranty.
Suitable for
- Running brushless motors in pumps and machines
- Robots and small electric carts
- Upgrading old machines with brushless motors
Seller's description
لوحة تحكم بمحركات التيار المستمر عديمة الفرش (BLDC) بقدرة 500W وتيار مستمر 15A وذروة 20A، تعمل على فولتية من 12V إلى 36V. تتحكّم بسرعة المحرك واتجاه دورانه، وتناسب المحركات المزوّدة بحساسات هول أو بدونها حسب النوع. محركات البرشلس أطول عمراً وأعلى كفاءة من محركات الفرش لكنها لا تدور بلا لوحة تحكم مثل هذه.
أبرز المزايا
- قدرة 500W وتيار مستمر 15A مع ذروة 20A
- تحكّم بالسرعة والاتجاه معاً
- مدى فولتية واسع من 12V حتى 36V
- حمايات ضد التيار الزائد والحرارة
- تحكّم بالسرعة عبر مقاومة متغيّرة أو إشارة تناظرية
الاستخدامات الشائعة
- تشغيل محركات البرشلس في المكائن والمضخات
- مشاريع الروبوتات والعربات الكهربائية الصغيرة
- مراوح ونفخات صناعية عالية الكفاءة
- تحديث مكائن قديمة بمحركات برشلس
ملاحظة: تأكد من توافق نوع المحرك مع اللوحة قبل الشراء؛ لوحة مصمّمة للمحركات ذات حساسات هول لا تُدير محركاً بلا حساسات والعكس، وقد يبدو المحرك وكأنه تالف بينما المشكلة في نوع التحكم.
What's in the box
لوحة تحكم محرك برشلس واحدة (بدون محرك أو مزود طاقة)
Specifications
| Maximum power | 500W |
|---|---|
| Continuous current | 15A |
| Peak current | 20A |
| Operating voltage | DC 12V – 36V |
| Motor type | محرك DC عديم الفرش (BLDC) |
| Speed adjustment | مقاومة متغيّرة أو إشارة تناظرية |
| التحكم | بالسرعة والاتجاه |
| الحمايات | تيار زائد وحرارة زائدة |
| متطلب التبريد | تهوية أو مشتّت عند الحمل العالي |
| الاستعمال النموذجي | المضخات والمكائن والروبوتات |
| Category | Robotics, Drones & Industrial Automation |
| More categories | Motion-control systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0904 |




