Battery capacity tester module

وحدة قياس سعة البطاريات ZB2L3 لبطاريات الليثيوم والرصاص الحامضي 1.2-12V | ZB2L3 Battery Capacity Tester Module 1.2-12V Li-ion and Lead-Acid Discharge Meter

⁨وحدة قياس سعة البطاريات ZB2L3 لبطاريات الليثيوم والرصاص الحامضي 1.2-12V | ZB2L3 Battery Capacity Tester Module 1.2-12V Li-ion and Lead-Acid Discharge Meter⁩ — ⁨4,463 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Measures capacity in mAh by real discharge
  • Battery range 1.2V to 12V
  • Adjustable cut-off voltage
  • 5V supply through micro USB
  • Load resistor and USB cable not included
4,463IQD5,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,463IQD

Its price has held at 5,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

ZB2L3 module that measures the capacity of lithium and lead-acid batteries from 1.2V to 12V by controlled discharge, with an LED readout.

The ZB2L3 is a test module that measures a battery's real capacity by controlled discharge and shows the result directly on a digital LED display. It measures in mAh through an actual discharge, rather than estimating from voltage alone.

It supports lithium-ion, lithium-polymer and lead-acid batteries in the 1.2V to 12V range, and its specifications also list NiMH. The module is powered by 5V through a micro USB port, independent of the battery under test. The display shows voltage in V and capacity in mAh, and the cut-off voltage is adjustable from the board buttons to protect the cell from deep discharge.

The discharge relies on an external load resistor connected to screw terminals. That resistor is not included, and neither is a USB cable: the box holds one ZB2L3 board only. The recommended resistor is 7.5Ω rated 10W or equivalent, bought according to the test current. Mount the resistor away from the board because it gets very hot, and watch its temperature in long tests.

Listed uses include sorting used 18650 cells before building them into a lithium pack, checking the capacity of small lead-acid batteries, comparing batteries with the capacity printed on the label, and testing power bank batteries. The condition is new with a 1 months warranty.

Suitable for

  • Sorting used 18650 cells
  • Checking the capacity of small lead-acid batteries
  • Comparing a battery with the capacity on its label

Seller's description

وحدة ZB2L3 أداة اختبار تقيس السعة الحقيقية للبطارية بطريقة التفريغ المتحكَّم به، وتعرض النتيجة مباشرة على شاشة LED رقمية. تدعم بطاريات الليثيوم أيون والليثيوم بوليمر والرصاص الحامضي ضمن نطاق 1.2V إلى 12V، وتُغذّى بجهد 5V عبر منفذ micro USB مستقل عن البطارية المختبَرة. يعتمد التفريغ على مقاومة حمل خارجية توصَّل بأطراف اللوحة، وهي الطريقة العملية لفرز خلايا 18650 المستعملة قبل تجميعها في حزم.

أبرز المزايا

  • قياس فعلي للسعة بالـmAh عبر التفريغ وليس تقديراً من الفولتية
  • نطاق واسع يغطي البطاريات من 1.2V حتى 12V
  • فولتية إيقاف قابلة للضبط بالأزرار لحماية الخلية من التفريغ العميق
  • تغذية منفصلة 5V عبر micro USB تُبقي القياس مستقلاً عن الحمل
  • أطراف برغي تسمح باستبدال مقاومة الحمل حسب تيار الاختبار المطلوب
  • شاشة LED واضحة تعرض الفولتية اللحظية والسعة المتراكمة

الاستخدامات الشائعة

  • فرز خلايا 18650 المستعملة قبل تجميع حزمة ليثيوم
  • التحقق من سعة بطاريات الرصاص الحامضي الصغيرة في أنظمة الإنذار
  • مقارنة البطاريات التجارية بالسعة المعلنة على الملصق
  • اختبار بطاريات الباور بانك وأجهزة القياس المحمولة

ملاحظة: اختر مقاومة حمل ذات قدرة كافية مثل 7.5Ω بقدرة 10W أو أعلى، وثبّتها بعيداً عن اللوحة لأنها تسخن كثيراً أثناء التفريغ، وراقب حرارتها في الاختبارات الطويلة.

What's in the box

لوحة قياس سعة البطاريات ZB2L3 واحدة بدون مقاومة الحمل أو كيبل USB

Specifications

ModelZB2L3
Battery voltage range1.2V – 12V DC
Module supply5V DC عبر منفذ micro USB
Measuring methodتفريغ فعلي عبر مقاومة حمل خارجية
Displayشاشة LED رقمية
Supported batteriesLi-ion / Li-po / Lead-acid / NiMH
Recommended load resistor7.5Ω بقدرة 10W
القيم المعروضةالفولتية بالـV والسعة بالـmAh
فولتية الإيقافقابلة للضبط عبر أزرار اللوحة
أطراف التوصيلمشابك برغي للبطارية وللحمل
أزرار التحكممفاتيح ضغط لضبط عتبة التوقف والتشغيل
طريقة التركيبلوحة مستقلة قابلة للتثبيت على حامل
مقاومة الحمل مضمّنةغير مضمّنة وتُشترى حسب تيار الاختبار
CategoryManufacturing, Maker, Lab & Test Equipment
More categoriesLab power supplies and measurement instruments
ConditionNew
Warranty1-month warranty
SKUNTK-0084

Questions about وحدة قياس سعة البطاريات ZB2L3 لبطاريات الليثيوم والرصاص الحامضي 1.2-12V | ZB2L3 Battery Capacity Tester Module 1.2-12V Li-ion and Lead-Acid Discharge Meter

It currently costs 4,463 IQD (was 5,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
According to the listing: Li-ion, Li-po, Lead-acid and NiMH within a 1.2V to 12V range.
No. The listing says the box holds one ZB2L3 board without the load resistor or a USB cable. A 7.5Ω resistor rated 10W or equivalent is recommended.
By 5V DC through a micro USB port, independent of the battery under test.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.