DC-DC boost converter

كارت رافع للفولتية XL6009 DC-DC قابل للضبط بتيار تبديل 4A | XL6009 DC-DC Step-Up Boost Converter Module, Adjustable, 4A Switch

⁨كارت رافع للفولتية XL6009 DC-DC قابل للضبط بتيار تبديل 4A | XL6009 DC-DC Step-Up Boost Converter Module, Adjustable, 4A Switch⁩ — ⁨9,563 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • XL6009 chip with a 4A peak internal switch
  • 400KHz switching frequency
  • Output higher than input and adjustable
  • IN+ / IN- and OUT+ / OUT- solder points
  • New, with a 1 months warranty
9,563IQD11,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

9,563IQD

Its price has held at 11,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

DC-DC step-up boost module built on the XL6009 chip with a 4A internal switch and an adjustable output, for raising 3.7V or 5V to 12V in small projects.

This card is a non-isolated DC-DC boost module built on the XL6009 chip. It takes a low input voltage and gives a higher output voltage that you adjust with a trimmer. The chip's internal switch handles a 4A peak current, and the switching frequency is 400KHz, which allows a smaller inductor and capacitors and improves response.

The listing says its efficiency is high and exceeds older boost circuits such as the MC34063, and that the chip has built-in current limiting and thermal protection. It is small with a small heatsink, and connects through IN+/IN- and OUT+/OUT- solder points on a standalone board, so it is easy to fit into small projects. For it to work, the output voltage must be higher than the input voltage.

The uses the listing gives are raising a 3.7V lithium battery to 5V or 12V, powering LED strips and circuits that need more voltage than a USB source, small solar projects and charging systems, and running 12V fans and motors from a 5V or 9V source. To set the output, turn the trimmer while watching the output with a multimeter.

An important point before buying: in boost circuits the input current is higher than the output current, so a 1A output at 12V draws more than 3A from a 5V input. Do not expect 4A at the output, since that is the internal switch current, and use thick input wires. The card is new according to the listing with a 1 months warranty, and the box holds one card. The listing does not state the maximum input or output voltage or the dimensions, so ask the shop through chat if you need them.

Suitable for

  • Raising a 3.7V lithium battery to 5V or 12V
  • Powering LED strips from a USB source
  • Small solar projects and charging systems
  • Running 12V fans and motors from a 5V or 9V source

Seller's description

وحدة رفع فولتية DC-DC مبنية على شريحة XL6009، تأخذ جهد دخل منخفض وتعطي جهد خرج أعلى قابل للضبط عبر مقاومة متغيرة. مفتاح القدرة الداخلي يتحمل تيار ذروة 4A وتعمل الشريحة بتردد تبديل 400KHz مما يسمح بملف ومكثفات أصغر. تُستخدم لتشغيل أحمال 12V أو 24V من بطارية ليثيوم أو مصدر 5V.

أبرز المزايا

  • شريحة XL6009 بمفتاح داخلي يتحمل تيار ذروة 4A
  • خرج أعلى من الدخل وقابل للضبط بحرية عبر مقاومة متغيرة
  • تردد تبديل 400KHz يقلل حجم الملف ويحسّن الاستجابة
  • كفاءة تحويل مرتفعة تفوق دوائر الرفع القديمة مثل MC34063
  • حماية داخلية ضد ارتفاع الحرارة وتحديد التيار في الشريحة
  • حجم صغير مع مشتّت حراري صغير يسهّل الدمج في المشاريع

الاستخدامات الشائعة

  • رفع جهد بطارية ليثيوم 3.7V إلى 5V أو 12V
  • تغذية شرائط LED ودوائر تحتاج جهداً أعلى من مصدر USB
  • مشاريع الطاقة الشمسية الصغيرة وأنظمة الشحن
  • تشغيل مراوح ومحركات 12V من مصدر 5V أو 9V

ملاحظة: في دوائر الرفع يكون تيار الدخل أعلى من تيار الخرج، فتيار خرج 1A عند 12V يسحب أكثر من 3A من دخل 5V. لا تتوقع 4A على الخرج، والتزم بأسلاك دخل سميكة.

What's in the box

كارت رافع للفولتية XL6009 واحد

Specifications

ChipXL6009
Conversion typeرافع غير معزول (non-isolated boost)
Internal switch current4A ذروة
Switching frequency400KHz
Output typeقابل للضبط عبر مقاومة متغيرة
Terminalsنقاط لحام IN+/IN- وOUT+/OUT-
علاقة الدخل بالخرججهد الخرج يجب أن يكون أعلى من جهد الدخل
الحماية الداخليةتحديد تيار وحماية حرارية داخل الشريحة
التبريدمشتّت حراري صغير على الشريحة
طريقة التركيبلوحة مستقلة صغيرة الحجم
الضبطلف المقاومة المتغيرة مع مراقبة الخرج بالمالتيميتر
الاستخدام النموذجيرفع 3.7V أو 5V إلى 12V
CategoryPower, Charging, Batteries & Energy Electronics
More categoriesInverters and converters
ConditionNew
Warranty1-month warranty
SKUNTK-0526

Questions about كارت رافع للفولتية XL6009 DC-DC قابل للضبط بتيار تبديل 4A | XL6009 DC-DC Step-Up Boost Converter Module, Adjustable, 4A Switch

It currently costs 9,563 IQD (was 11,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
No. The 4A is the internal switch peak current, not the output current, and the listing warns not to expect 4A at the output.
No, it is a boost converter only, and the output voltage must be higher than the input voltage.
Turn the trimmer on the board while monitoring the output with a multimeter.
The listing does not specify the maximum output or input voltage, so ask the shop through chat before buying.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.