IR receiver module

حساس استقبال أشعة تحت حمراء VS1838B بتردد حامل 38kHz | VS1838B 38kHz Infrared Receiver Head for Remote Control Signals

⁨حساس استقبال أشعة تحت حمراء VS1838B بتردد حامل 38kHz | VS1838B 38kHz Infrared Receiver Head for Remote Control Signals⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 38kHz carrier frequency
  • 2.7V – 5.5V DC operating voltage
  • Active-low digital output
  • Photodiode, amplifier, filter and demodulator in one
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

VS1838B infrared receiver head with a 38kHz carrier and a digital output, running from 2.7V to 5.5V for remote-control projects.

The VS1838B is an integrated infrared receiver head combining the photodiode, amplifier, filter and demodulator in one package with OUT, GND and VCC pins. It is tuned to the 38kHz carrier used by most remote controls and gives an active-low digital output that connects straight to a microcontroller input with no extra circuitry.

It runs on 2.7V to 5.5V DC, so it suits 3.3V and 5V systems. The wavelength is about 940nm, and reception range is several metres within a direct line of sight. An internal optical filter against room lighting reduces the effect of ambient light.

Mounting is through-hole (THT) in a black plastic housing. The recommended wiring is a 100Ω resistor on VCC and a 4.7µF capacitor to GND, and check the pin order before powering it.

Listed uses include receiving remote commands in Arduino and ESP32 projects, controlling lighting, air conditioners and home-theatre systems, learning and copying remote codes in smart control systems, and optical beam-break sensors and simple counting systems. The part is new with a 1-month warranty, and the box holds 1 VS1838B receiver head.

Suitable for

  • Receiving remote commands in Arduino and ESP32 projects
  • Controlling lighting, air conditioners and home theatre
  • Optical beam-break sensors and simple counting systems

Seller's description

رأس استقبال أشعة تحت حمراء متكامل يجمع الفوتودايود ودائرة التضخيم والفلترة وفك التشكيل في علبة واحدة بثلاثة أطراف. مضبوط على تردد حامل 38kHz المستخدم في معظم أجهزة التحكم عن بُعد، ويعطي خرجًا رقميًا يوصَل مباشرة بطرف متحكم دقيق دون دوائر إضافية. يعمل بفولتية من 2.7V إلى 5.5V ويستقبل الإشارة من عدة أمتار ضمن مجال رؤية مباشر.

أبرز المزايا

  • يجمع المستقبل والمضخم والفلتر وفك التشكيل في مكوّن واحد
  • مضبوط على 38kHz وهو تردد أغلب أجهزة الريموت المنزلية
  • خرج رقمي active-low يتصل مباشرة بمدخل مقاطعة في المتحكم
  • مدى تغذية واسع 2.7V–5.5V يناسب أنظمة 3.3V و5V
  • فلتر ضوئي داخلي يقلل تأثير إنارة الغرفة وأشعة الشمس غير المباشرة
  • ثلاثة أطراف فقط: بساطة في التوصيل والتركيب

الاستخدامات الشائعة

  • استقبال أوامر الريموت في مشاريع Arduino و ESP32
  • أجهزة التحكم بالإنارة والمكيفات وأنظمة المسرح المنزلي
  • تعلّم أكواد الريموت ونسخها في أنظمة التحكم الذكية
  • حساسات القطع الضوئي وأنظمة العد البسيطة

ملاحظة: انتبه لترتيب الأطراف قبل التوصيل لأنه يختلف عن مستقبلات أخرى مشابهة الشكل، وأضف مقاومة 100Ω على التغذية مع مكثف 4.7µF إلى الأرضي لتقليل ضوضاء المصدر وتحسين المدى.

What's in the box

رأس استقبال VS1838B واحد

Specifications

ModelVS1838B
Carrier frequency38kHz
Operating voltage2.7V – 5.5V DC
Output typeرقمي active-low يتصل مباشرة بمتحكم دقيق
Pins3 أطراف (OUT / GND / VCC)
Wavelength940nm تقريبًا
الوظائف المدمجةفوتودايود + مضخم + فلتر + فك تشكيل
مدى الاستقبالعدة أمتار ضمن مجال رؤية مباشر
مقاومة الضوء المحيطفلتر ضوئي داخلي ضد إنارة الغرفة
نوع التركيبسلكي THT بعلبة بلاستيكية سوداء
توصيل موصى بهمقاومة 100Ω على VCC ومكثف 4.7µF إلى GND
الاستخداماستقبال أوامر الريموت ومشاريع التحكم
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0145

Questions about حساس استقبال أشعة تحت حمراء VS1838B بتردد حامل 38kHz | VS1838B 38kHz Infrared Receiver Head for Remote Control Signals

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
38kHz, the frequency of most household remotes, according to the listing.
Yes, the operating voltage is 2.7V to 5.5V DC, so it suits 3.3V and 5V systems.
Its output is active-low digital and connects directly to a controller pin; the recommended wiring is a 100Ω resistor on VCC and a 4.7µF capacitor to GND.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.