FTDIUSB to TTL/RS485 converter

محول USB 2.0 إلى TTL و RS485 مزدوج الوظيفة بشريحتي FT232RL و SN75176 | USB 2.0 to TTL / RS485 Dual-Function Serial Converter (FT232RL + SN75176)

⁨محول USB 2.0 إلى TTL و RS485 مزدوج الوظيفة بشريحتي FT232RL و SN75176 | USB 2.0 to TTL / RS485 Dual-Function Serial Converter (FT232RL + SN75176)⁩ — ⁨5,000 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • FTDI FT232RL chip for USB to TTL
  • SN75176 driver for differential RS485
  • TTL logic level 3.3V or 5V
  • Up to 1200m and 32 nodes on the bus
  • New, with a 1 months warranty
5,000IQD6,250IQDخصم 20%In stock
1

Ask about stock or request a better price

Price

5,000IQD

Its price has held at 6,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

A dual-function serial converter on one board: USB to TTL through the FT232RL chip and USB to RS485 through the SN75176, for programming controllers and linking Modbus devices.

This serial converter combines a pair of functions on one board: USB to TTL through the FTDI FT232RL chip, and a differential RS485 output through the SN75176 driver. It lets you program controllers and monitor serial communication on one side, and connect a computer directly to Modbus devices and industrial meters over long distances on the other, without buying separate converters.

On the computer side it uses a USB 2.0 interface and appears as a virtual COM port, so it works with terminal programs; the listing mentions Windows, Linux and macOS with VCP drivers. The TTL logic level is 3.3V or 5V depending on the setting, so set it to your board voltage before connecting to avoid damaging the controller.

The RS485 bus here is half-duplex on lines A and B, meaning it cannot send and receive at the same moment. The listing gives a maximum distance of up to 1200m per the EIA/TIA-485 standard and up to 32 nodes on the bus, with protection elements on the bus lines against transients and polarity. If you see garbled data, check that the baud rate matches and that lines A and B are not swapped.

Listed uses include reading energy meters and Modbus RTU devices from a computer, programming controllers and watching serial output during development, and servicing PLC, industrial control and inverter systems. The item is new with a 1 months warranty and the box contains one converter.

Suitable for

  • Reading energy meters and Modbus RTU devices
  • Programming controllers and monitoring Serial output
  • Servicing PLC systems and inverters

Seller's description

محول تسلسلي يجمع وظيفتين على لوحة واحدة: منفذ USB إلى TTL عبر شريحة FT232RL من FTDI، ومخرج RS485 تفاضلي عبر سائق SN75176. يتيح ذلك برمجة المتحكمات ومراقبة الاتصال التسلسلي من جهة، وربط الحاسبة مباشرة بأجهزة Modbus والعدادات الصناعية على مسافات طويلة من جهة أخرى، دون الحاجة إلى شراء محولين منفصلين.

أبرز المزايا

  • وظيفتان في لوحة واحدة: TTL Serial و RS485 التفاضلي
  • شريحة FT232RL معروفة باستقرار مشغلاتها على Windows و Linux و macOS
  • سائق SN75176 يقود ناقل RS485 حتى 1200m وحتى 32 عقدة
  • عناصر حماية على خطي A و B ضد الفولتيات العابرة وانعكاس القطبية
  • يظهر في الحاسبة كمنفذ COM افتراضي فيعمل مع أي برنامج طرفية

الاستخدامات الشائعة

  • قراءة عدادات الطاقة وأجهزة Modbus RTU من الحاسبة مباشرة
  • برمجة المتحكمات ومراقبة خرج Serial أثناء التطوير
  • صيانة أنظمة PLC والتحكم الصناعي والإنفيرترات

ملاحظة: ناقل RS485 نصف مزدوج، أي لا يمكن الإرسال والاستقبال في اللحظة نفسها؛ إذا ظهرت بيانات مشوّهة فتحقق من تطابق معدل البود وعدم عكس طرفي A و B.

What's in the box

محول USB إلى TTL و RS485 واحد

Specifications

BrandFTDI
USB chipFTDI FT232RL
RS485 driverSN75176 تفاضلي
Computer interfaceUSB 2.0 يظهر كمنفذ COM افتراضي
TTL logic level3.3V أو 5V حسب الإعداد
RS485 modehalf-duplex على خطي A و B
Maximum distanceحتى 1200m وفق معيار EIA/TIA-485
Nodesحتى 32 عقدة على الناقل
Operating systemsWindows و Linux و macOS بمشغلات VCP
الوظيفةمحول مزدوج USB إلى TTL و USB إلى RS485
الحمايةعناصر حماية على خطي الناقل ضد العابر والقطبية
الاستخدامModbus RTU وبرمجة المتحكمات وصيانة الأنظمة الصناعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0367

Questions about محول USB 2.0 إلى TTL و RS485 مزدوج الوظيفة بشريحتي FT232RL و SN75176 | USB 2.0 to TTL / RS485 Dual-Function Serial Converter (FT232RL + SN75176)

It currently costs 5,000 IQD (was 6,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
Yes, the listing mentions Windows, Linux and macOS with VCP drivers.
3.3V or 5V depending on the setting.
No, the RS485 mode here is half-duplex, so it cannot send and receive at the same moment.
Up to 1200m per the EIA/TIA-485 standard and up to 32 nodes on the bus, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.