SOP-8 to DIP8 adapter board

لوحة تحويل TSSOP8 وSSOP8 وSOP-8 إلى DIP8 بخطوة 2.54mm | TSSOP8 / SSOP8 / SOP-8 To DIP8 SMD Adapter PCB Transfer Board

⁨لوحة تحويل TSSOP8 وSSOP8 وSOP-8 إلى DIP8 بخطوة 2.54mm | TSSOP8 / SSOP8 / SOP-8 To DIP8 SMD Adapter PCB Transfer Board⁩ — ⁨2,475 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Converts TSSOP8, SSOP8 and SOP-8 to DIP8
  • 2.54mm output pitch
  • Supports 0.65mm and 1.27mm lead pitches
  • FR4 board with pin 1 marking
  • Supplied without header
2,475IQD2,750IQDخصم 10%In stock
1

Ask about stock or request a better price

Price

2,475IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Adapter board converting TSSOP8, SSOP8 and SOP-8 chips to DIP8 at 2.54mm pitch, for reading memory chips and testing surface-mount ICs.

This adapter board moves surface-mount chips in TSSOP8, SSOP8 and SOP-8 packages to a DIP8 layout at 2.54mm pitch. You solder the surface-mount chip onto the board, then fit the board into a standard DIP8 socket, a breadboard or a programmer with a DIP socket. According to the listing it helps with reading and programming SPI Flash and EEPROM chips, testing op-amps and charge controllers, and replacing an old DIP8 chip with a surface-mount equivalent.

Specifications: pin count 8, support for 0.65mm and 1.27mm lead pitches, an FR4 board with a copper layer, tinned solder pads and a printed marker for pin number 1 on the board. The listing says it withstands removing the chip and re-soldering more than once. Connection is by a 2.54mm male header soldered along both edges, and according to the listing the box contains the adapter board without a header, so you need to supply the header yourself.

Installation tips from the listing: match pin 1 on the chip with the marking printed on the board before soldering, because reversing it damages the memory chip at first power-up; use flux and an iron at 300-320°C, and check for solder bridges with a meter before fitting it in the programmer. The condition is new, with a 1-month warranty.

Suitable for

  • Reading and programming SPI Flash and EEPROM chips
  • Testing surface-mount chips on a breadboard
  • Replacing an old DIP8 chip with a surface-mount equivalent
  • Repair workshops for motherboards and routers

Seller's description

لوحة تحويل تنقل الشرائح السطحية ذات ثمانية أطراف بحزم TSSOP8 وSSOP8 وSOP-8 إلى نمط DIP8 بخطوة 2.54mm. حزمة SOP-8 هي الأكثر شيوعاً في شرائح الذاكرة والـ EEPROM ومضخّمات العمليات ومتحكمات الشحن، لذا تُعد هذه اللوحة من أكثر لوحات التحويل استخداماً في ورش الصيانة وقراءة الذاكرة والنماذج الأولية.

أبرز المزايا

  • تدعم ثلاث حزم سطحية شائعة: TSSOP8 وSSOP8 وSOP-8.
  • تحويل إلى DIP8 بخطوة 2.54mm يركّب في أي قاعدة DIP8 قياسية.
  • الحل المعتاد لقراءة شرائح الذاكرة SOP-8 على المبرمجات ذات القاعدة DIP.
  • مساحات لحام مرقّمة تحدد الطرف رقم 1 بوضوح.
  • ثمانية أطراف فقط تجعل اللحام اليدوي سريعاً ومباشراً.
  • لوحة FR4 تتحمّل فك الشريحة وإعادة اللحام أكثر من مرة.

الاستخدامات الشائعة

  • قراءة وبرمجة شرائح الذاكرة SPI Flash وEEPROM بحزمة SOP-8.
  • اختبار مضخّمات العمليات ومتحكمات الشحن السطحية على breadboard.
  • استبدال شريحة DIP8 قديمة بمكافئ سطحي متوفر في السوق.
  • ورش صيانة اللوحات الأم وأجهزة الاستقبال والراوترات.

ملاحظة: طابق الطرف رقم 1 على الشريحة مع العلامة المطبوعة على اللوحة قبل اللحام، فعكس الاتجاه يتلف شريحة الذاكرة عند أول تشغيل؛ واستخدم فلَكس وكاوية 300-320°C وافحص الجسور بجهاز القياس قبل التركيب في المبرمجة.

What's in the box

لوحة تحويل SOP-8 إلى DIP8 واحدة (بدون هيدر)

Specifications

Supported packagesTSSOP8 / SSOP8 / SOP-8
Output packageDIP8 بخطوة 2.54mm
Pin count8
Supported lead pitches0.65mm و1.27mm
Board materialFR4 بطبقة نحاس
معالجة السطحمساحات لحام مقصدرة
ترقيم الأرجلعلامة الطرف رقم 1 مطبوعة على اللوحة
التوافققواعد DIP8 والمبرمجات وbreadboard
الشرائح الشائعةSPI Flash وEEPROM ومضخّمات العمليات
طريقة التوصيلهيدر ذكر 2.54mm يُلحم على الحافتين
إعادة الاستخدامتتحمّل فك الشريحة وإعادة اللحام
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0592

Questions about لوحة تحويل TSSOP8 وSSOP8 وSOP-8 إلى DIP8 بخطوة 2.54mm | TSSOP8 / SSOP8 / SOP-8 To DIP8 SMD Adapter PCB Transfer Board

It currently costs 2,475 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It supports TSSOP8, SSOP8 and SOP-8 and converts them to DIP8 at 2.54mm pitch.
No, the listing says the product is the adapter board without a header; connection uses a 2.54mm male header soldered to the edges.
Match pin 1 on the chip with the marking printed on the board before soldering.
Yes, the listing says it withstands removing the chip and re-soldering.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.