GenericPCB spring terminal block
طرف توصيل زنبركي للوحات الدوائر المطبوعة 6P KF142R 5.08mm | PCB Spring Terminal Block
طرف توصيل زنبركي للوحات الدوائر المطبوعة 6P KF142R 5.08mm | PCB Spring Terminal Block — 2,450 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 6P spring terminal block
- Model KF142R
- 5.08mm spacing
- For mounting on PCBs
- Condition: new
Ask about stock or request a better price
Price
2,450IQDIts price has held at 3,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
6P KF142R spring terminal block with 5.08mm spacing for PCB mounting, with no screws needed.
The 6P KF142R spring terminal block is a connector soldered onto a printed circuit board (PCB) that grips wires with a built-in spring mechanism, so no screws are needed. This saves assembly time and makes changes and maintenance easier in electronics projects.
Stated specifications: model KF142R, 6P pole count and 5.08mm spacing. Before buying, confirm that the pole count suits your circuit and that the 5.08mm spacing matches the holes on your board, because a mismatch prevents fitting. The listing does not give the accepted wire size or the maximum current or voltage, so check with the shop through chat if your project depends on them.
When installing, clean the wire ends and insert them fully, seat the connector flat on the board before soldering, avoid mechanical stress and excess heat, and check the connections afterwards. The condition is new, with a 1-month warranty against manufacturing operating defects that does not cover misuse.
Suitable for
- Connecting wires to a PCB without screws
- Control and electronics assembly projects
- Replacing a connector on an existing board
Seller's description
طرف توصيل زنبركي للوحات الدوائر المطبوعة 6P KF142R 5.08mm
يعد طرف التوصيل الزنبركي 6P KF142R بمسافة 5.08mm خياراً مثالياً للمهندسين والهواة الذين يبحثون عن وسيلة فعالة لتوصيل الأسلاك في لوحات الدوائر المطبوعة (PCB). بفضل آلية الزنبرك المدمجة، يوفر هذا الموصل اتصالاً كهربائياً قوياً ومستقراً دون الحاجة إلى براغي، مما يسهل عملية التجميع ويوفر الوقت في المشاريع الإلكترونية المتنوعة.
قبل البدء في عملية التركيب، تأكد من أن عدد المسارات (6P) يتوافق مع متطلبات دائرتك، وأن مسافة التباعد (5.08mm) تتناسب مع تصميم اللوحة المطبوعة لديك. هذا التأكد المسبق يضمن تركيباً دقيقاً ويمنع أي مشاكل قد تنتج عن عدم تطابق القياسات. يتميز هذا الموصل بقدرته على تحمل الاستخدام المتكرر، مما يجعله مناسباً لمختلف التطبيقات الصناعية والتعليمية في العراق.
للحصول على أفضل النتائج، تأكد من تنظيف أطراف الأسلاك جيداً قبل إدخالها في الموصل، وتأكد من إدخالها بالكامل لضمان تلامس كهربائي آمن. عند لحام الموصل على اللوحة، تأكد من توزيع الحرارة بشكل متساوٍ وتجنب الضغط الميكانيكي على الأطراف. يُنصح دائماً بفحص التوصيلات بعد الانتهاء من التركيب للتأكد من ثباتها وعدم وجود أي أسلاك مرتخية قد تؤثر على أداء الدائرة.
المواصفات الفنية والمميزات
- طراز المنتج: KF142R
- عدد المسارات: 6P
- مسافة التباعد: 5.08mm
- آلية زنبركية لسهولة الاستخدام
- تصميم مدمج للوحات PCB
- جودة عالية في التوصيل الكهربائي
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 6P KF142R 5.08mm PCB Spring Terminal Block.
Specifications
| Brand | Generic |
|---|---|
| Model | KF142R |
| Poles | 6P |
| Spacing | 5.08mm |
| الموديل أو اسم القطعة | 6P KF142R 5.08mm PCB Spring Terminal Block |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Printed circuit boards |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XA143A0C6633 |




