Thermal adhesive tape
شريط لاصق حراري مزدوج الوجه بعرض 10 ملم وطول 25 متراً | Thermal Conductive Double-Sided Adhesive Tape, 10mm x 25m, 0.2mm Thick
شريط لاصق حراري مزدوج الوجه بعرض 10 ملم وطول 25 متراً | Thermal Conductive Double-Sided Adhesive Tape, 10mm x 25m, 0.2mm Thick — 3,938 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Double-sided tape that fixes and transfers heat
- 10mm wide and 25m long
- 0.2mm thick
- No screws or clips needed
- Lower thermal conductivity than thermal paste
Ask about stock or request a better price
Price
3,938IQDIts price has held at 5,250 IQD for the last 11 days.
About this item
Double-sided thermal adhesive tape, 10mm wide, 25m long and 0.2mm thick, which fixes heatsinks and transfers heat without screws.
This is a double-sided thermal adhesive tape that fixes the heatsink and transfers heat at the same time, so no screws or clips are needed. The dimensions are 10mm wide, 25m long and 0.2mm thick, and the listing states this thickness does not insulate against heat.
According to the listing, the 10mm width suits medium-sized chips, and the 25m roll is enough for long work. Uses mentioned: fixing heatsinks onto chips, sticking LED strips onto aluminium bars, cooling memory chips and regulator units, and cooling work in custom projects.
An important point: the tape's thermal conductivity is much lower than thermal paste, so use it where mechanical fixing is impossible, not as a substitute for paste under processors and high-power semiconductors. Method of use: clean the surface, then stick it on with steady pressure.
The box holds one roll of thermal adhesive tape, 10mm wide and 25m long, and the product is new with a 1-month warranty. The listing does not state the thermal conductivity value or the permitted temperature range, so ask the shop through chat if you need them.
Suitable for
- Fixing heatsinks onto chips
- Sticking LED strips onto aluminium bars
- Cooling memory chips and regulator units
Seller's description
شريط لاصق مزدوج الوجه موصل للحرارة بعرض 10 ملم وطول 25 متراً وسماكة 0.2 ملم. يجمع وظيفتين في مادة واحدة: يثبّت المشتّت الحراري ميكانيكياً وينقل الحرارة إليه في الوقت نفسه، فيلغي الحاجة إلى مشابك أو براغي، وهذا هو الحل الوحيد العملي على رقاقات صغيرة لا مكان لأي تثبيت ميكانيكي حولها.
أبرز المزايا
- يثبّت المشتّت وينقل الحرارة معاً
- يلغي الحاجة إلى براغي أو مشابك
- سماكة 0.2 ملم لا تعزل الحرارة
- عرض 10 ملم مناسب للرقاقات المتوسطة
- لفة 25 متراً تكفي عملاً طويلاً
الاستخدامات الشائعة
- تثبيت المشتّتات على الرقاقات
- لصق شرائط LED على قضبان الألمنيوم
- تبريد ذواكر ووحدات التنظيم
- أعمال التبريد في المشاريع المخصصة
ملاحظة: موصلية الشريط الحرارية أقل بكثير من المعجون الحراري؛ استعمله حيث يستحيل التثبيت الميكانيكي، لا كبديل للمعجون تحت المعالجات وأشباه الموصلات عالية القدرة.
What's in the box
لفة شريط لاصق حراري بعرض 10 ملم وطول 25 متراً
Specifications
| Type | شريط لاصق حراري مزدوج الوجه |
|---|---|
| Width | 10 ملم |
| Length | 25 متراً |
| Thickness | 0.2 ملم |
| Function | تثبيت ونقل حرارة معاً |
| الموصلية الحرارية | أقل من المعجون الحراري |
| الحاجة إلى براغي | لا |
| الاستعمال الأنسب | حيث يستحيل التثبيت الميكانيكي |
| طريقة الاستعمال | تنظيف السطح ثم اللصق بضغط ثابت |
| الاستعمال النموذجي | تثبيت المشتّتات وشرائط LED |
| Category | Electronic Materials, Adhesives & Consumables |
| More categories | Thermal interface materials |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0880 |




