Peltier cooling kit
طقم تبريد بلتير TEC1-12705 بفولتية 12V وقدرة 60W مع مروحتين وهيت سنك عدد 2 | TEC1-12705 Peltier Thermoelectric Cooler Kit 12V 60W with 2 Fans and 2 Heatsinks
طقم تبريد بلتير TEC1-12705 بفولتية 12V وقدرة 60W مع مروحتين وهيت سنك عدد 2 | TEC1-12705 Peltier Thermoelectric Cooler Kit 12V 60W with 2 Fans and 2 Heatsinks — 21,000 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- TEC1-12705 Peltier plate, up to 60W
- 12V DC, maximum current 5A
- 2 aluminium heatsinks and 2 fans, pre-assembled
- Cooling direction reversed by swapping polarity
- New, with a 1 months warranty
Ask about stock or request a better price
Price
21,000IQDIts price has held at 21,000 IQD for the last 11 days.
About this item
Ready-assembled thermoelectric cooling kit with a TEC1-12705 Peltier plate, a heatsink and a fan on each side, running on 12V DC.
This is a fully assembled thermoelectric cooling kit with a TEC1-12705 Peltier plate between 2 aluminium heatsinks and 2 fans, one heatsink and fan per side. When powered at 12V DC, one face of the plate gets cold and the other hot, and the kit moves heat from the cold side into the air through the hot side. It is rated up to 60W with a maximum current of 5A, and the Peltier plate is roughly 40 × 40 mm.
It suits building a small fridge, a drinks cooler box or a mini water cooler, and spot-cooling experiments for sensors and cameras or student projects. You need a 12V supply of 5A or more, and the kit draws its maximum current continuously while running. An important warning from the listing: the hot-side fan must always run, otherwise the plate overheats and is damaged within minutes. Do not run it above 12V, and use thermal paste when reassembling. The item is new with a 1 months warranty.
Suitable for
- Building a small fridge or drinks cooler box
- Mini water cooler
- Spot cooling of sensors and cameras in projects
- Student thermoelectric cooling projects
Seller's description
طقم تبريد حراري كهربائي جاهز ومركّب بالكامل، يتكوّن من قطعة بلتير TEC1-12705 تعمل بفولتية 12V وتيار حتى 5A، مثبتة بين هيت سنك ألمنيوم على كل وجه مع مروحة لكل منهما. عند التغذية يبرد أحد وجهي القطعة ويسخن الآخر، فينقل الطقم الحرارة من الجانب البارد إلى الهواء عبر الجانب الساخن. مناسب لبناء ثلاجة صغيرة أو مبرد ماء أو تجارب تبريد نقطية.
أبرز المزايا
- قطعة بلتير TEC1-12705 قياسية 40×40mm بقدرة تصل إلى 60W
- يعمل بفولتية 12V DC وتيار أقصى 5A من مزود بسيط
- مركّب جاهز: هيت سنك ومروحة على الوجهين بلا حاجة لتجميع
- تبريد صامت بلا ضاغط ولا غاز ولا أجزاء متحركة داخل القطعة
- يمكن عكس اتجاه التبريد بعكس قطبية التغذية
- فرق حرارة كبير بين الوجهين عند تصريف حرارة الجانب الساخن جيداً
الاستخدامات الشائعة
- ثلاجات صغيرة وصناديق تبريد المشروبات
- مبردات ماء مصغرة وتجارب تكثيف بخار الماء
- تبريد نقطي للحساسات والكاميرات في المشاريع
- مشاريع الطلبة في التبريد الحراري الكهربائي
ملاحظة: يجب أن تعمل مروحة الجانب الساخن دائماً مع الطقم؛ توقف تبريد هذا الجانب يرفع حرارة القطعة ويتلفها خلال دقائق. لا تشغّله بفولتية أعلى من 12V واستخدم معجوناً حرارياً عند أي إعادة تركيب.
What's in the box
طقم تبريد واحد يضم قطعة بلتير TEC1-12705 وهيت سنك عدد 2 ومروحة عدد 2 مركّبة
Specifications
| Peltier plate | TEC1-12705 |
|---|---|
| Operating voltage | 12V DC |
| Maximum current | 5A |
| Power | حتى 60W |
| Peltier plate size | 40 × 40 mm تقريباً |
| Kit contents | بلتير + 2 هيت سنك ألمنيوم + 2 مروحة، مركّبة معاً |
| Supply requirement | مزود 12V بتيار 5A أو أكثر |
| مبدأ العمل | ظاهرة Peltier: وجه بارد ووجه ساخن بلا أجزاء متحركة |
| عكس التبريد | عكس قطبية التغذية يعكس الوجه البارد والساخن |
| التوصيل الحراري | معجون حراري بين البلتير والهيت سنك |
| الاستهلاك | يسحب تياره الأقصى باستمرار طالما هو مشغّل |
| Category | PC Components & Modding |
| More categories | Cooling systems |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0566 |




