ST-Link programmer

مبرمجة ومصحّح أخطاء ST-Link V2 Mini لمتحكمات STM32 وSTM8 | ST-Link V2 Mini USB Programmer and Debugger for STM32 / STM8

⁨مبرمجة ومصحّح أخطاء ST-Link V2 Mini لمتحكمات STM32 وSTM8 | ST-Link V2 Mini USB Programmer and Debugger for STM32 / STM8⁩ — ⁨5,000 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • SWD for STM32 and SWIM for STM8
  • 3.3V or 5V power output for the target board
  • 500mA self-resetting fuse on the USB line
  • Live debugging with breakpoints and variable watching
  • Metal shell the size of a flash drive
5,000IQD6,250IQDخصم 20%In stock
1

Ask about stock or request a better price

Price

5,000IQD

Its price has held at 6,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

ST-Link V2 Mini USB programmer and debugger for STM32 (SWD) and STM8 (SWIM) controllers, with a 3.3V and 5V power output.

The ST-Link V2 Mini is a small programmer and debugger in a metal (aluminium) shell the size of a flash drive. It connects to the computer over USB with a Type-A plug and is used to upload and debug code on STM32 controllers through the SWD interface and on STM8 controllers through the SWIM interface. It is a basic tool for anyone working on STMicroelectronics chips on a limited budget.

The programmer provides a 3.3V or 5V power output to run the target board directly without an external supply; the output pins are SWDIO, SWCLK, GND, 3.3V and 5V. It has a 500mA self-resetting fuse on the USB line that protects the computer's port from short circuits, and a two-colour LED showing connection and data transfer status. For debugging it supports breakpoints, step-by-step tracing and watching variables while running.

The compatible environments named in the listing are STM32CubeIDE, Keil, IAR and PlatformIO. It suits programming Blue Pill, Black Pill and other STM32 boards, uploading a bootloader or recovering a board that stopped responding, and programming STM8 controllers in small devices. Connection is by female Dupont wires to the SWD header on the target board, and the contents are one programmer with a set of Dupont wires.

An important note from the listing: do not connect the 3.3V and 5V outputs to the target board together; choose the one matching its operating voltage, and connect the GND pin first to avoid voltage differences that could damage the SWD pins. The item is new according to the listing, with a warranty of 1 months according to the warranty field.

Suitable for

  • Programming Blue Pill, Black Pill and other STM32 boards
  • Debugging projects from STM32CubeIDE or Keil
  • Uploading a bootloader or recovering an unresponsive board
  • Programming STM8 controllers in small devices

Seller's description

مبرمجة ومصحّح أخطاء صغيرة الحجم بهيكل معدني يشبه الفلاش ميموري، تتصل بالحاسبة عبر USB وتُستخدم لرفع الكود وتنقيحه على متحكمات STM32 عبر واجهة SWD وعلى متحكمات STM8 عبر واجهة SWIM. توفّر خرج تغذية 3.3V و5V لتشغيل اللوحة الهدف مباشرة، وهي الأداة الأساسية لأي مطوّر يعمل على شرائح STMicroelectronics بميزانية محدودة.

أبرز المزايا

  • دعم واجهتي SWD لمتحكمات STM32 وSWIM لمتحكمات STM8
  • تنقيح حي مع نقاط توقّف Breakpoints ومراقبة المتغيّرات أثناء التشغيل
  • خرج تغذية 3.3V و5V يشغّل اللوحة الهدف دون مصدر خارجي
  • فيوز داخلي ذاتي الاسترجاع 500mA يحمي منفذ USB من التماس
  • مؤشر LED ثنائي اللون يوضّح حالة الاتصال ونقل البيانات
  • هيكل معدني متين وحجم يوضع في الجيب

الاستخدامات الشائعة

  • برمجة لوحات Blue Pill وBlack Pill وبقية لوحات STM32
  • تنقيح المشاريع خطوة بخطوة من داخل STM32CubeIDE أو Keil
  • رفع البوت لودر أو استعادة لوحة توقفت عن الاستجابة
  • برمجة متحكمات STM8 في الأجهزة والمنتجات الصغيرة

ملاحظة: لا توصّل خرج 3.3V وخرج 5V معاً إلى اللوحة الهدف، واختر واحداً يطابق فولتية تشغيلها، ووصّل طرف GND أولاً لتفادي فروق الجهد التي قد تتلف أطراف SWD.

What's in the box

مبرمجة ST-Link V2 Mini واحدة مع مجموعة أسلاك توصيل Dupont.

Specifications

Supported interfacesSWD لمتحكمات STM32 وSWIM لمتحكمات STM8
Computer connectionUSB مباشر بقابس Type-A
Output pinsSWDIO وSWCLK وGND و3.3V و5V
Target board supply3.3V أو 5V من المبرمجة نفسها
Protectionفيوز ذاتي الاسترجاع 500mA على خط USB
IndicatorsLED ثنائي اللون لحالة الاتصال ونقل البيانات
Compatible environmentsSTM32CubeIDE وKeil وIAR وPlatformIO
Shell materialغلاف معدني (ألمنيوم) بحجم فلاش ميموري
وظائف التنقيحBreakpoints وتتبّع خطوة بخطوة ومراقبة المتغيّرات
طريقة التوصيلأسلاك Dupont أنثى إلى هيدر SWD على اللوحة الهدف
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
SKUNTK-0328

Questions about مبرمجة ومصحّح أخطاء ST-Link V2 Mini لمتحكمات STM32 وSTM8 | ST-Link V2 Mini USB Programmer and Debugger for STM32 / STM8

It currently costs 5,000 IQD (was 6,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
STM32 controllers through SWD and STM8 controllers through SWIM, according to the listing.
No, the listing warns against connecting both outputs to the target board together. Choose the one that matches its operating voltage and connect GND first.
Yes, the compatible environments listed are STM32CubeIDE, Keil, IAR and PlatformIO.
One ST-Link V2 Mini programmer with a set of Dupont connecting wires.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.