SOT89/SOT223 to DIP3 adapter board

لوحة تحويل SOT89 وSOT223 إلى DIP3 بخطوة 2.54mm للعناصر السطحية | SOT89 / SOT223 To DIP3 2.54mm SMD Adapter PCB Board

⁨لوحة تحويل SOT89 وSOT223 إلى DIP3 بخطوة 2.54mm للعناصر السطحية | SOT89 / SOT223 To DIP3 2.54mm SMD Adapter PCB Board⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Supports SOT89 and SOT223 packages
  • Converts to DIP3 at 2.54mm
  • Large copper area for heat dissipation
  • FR4 board that can be re-soldered
  • Supplied without header
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Adapter board converting SOT89 and SOT223 parts to DIP3 at 2.54mm pitch with a copper cooling area, for testing transistors, MOSFETs and regulators.

This adapter board moves surface-mount parts in the SOT89 and SOT223 packages to 3 pins at 2.54mm pitch, compatible with breadboards. According to the listing these packages are used for transistors, MOSFETs and medium-power voltage regulators.

The board has a large copper area under the part that helps dissipate heat during testing, and relatively large solder pads that make hand soldering easier. It is made of FR4 with a copper layer and withstands removing a part and soldering another. Connection is by a 2.54mm male header or soldered wires, and according to the listing the product is the board without a header. Uses per the listing: testing surface-mount voltage regulators such as LDO families, trying SOT223 transistors and MOSFETs in prototypes, replacing a rare through-hole part with a surface-mount equivalent, and checking a surface-mount part away from the original board in repair workshops.

When soldering the wide metal tab, heat the copper area well first because it pulls heat away quickly, and do not prolong heating on the signal leads. With high current loads add cooling area or limit the test time. The condition is new with a 1-month warranty.

Suitable for

  • Testing surface-mount voltage regulators on a breadboard
  • Trying SOT223 transistors and MOSFETs
  • Replacing a rare through-hole part with a surface-mount equivalent
  • Checking surface-mount parts in repair workshops

Seller's description

لوحة تحويل تنقل العناصر السطحية بحزمتي SOT89 وSOT223 إلى ثلاثة أطراف بخطوة 2.54mm. هاتان الحزمتان تستخدمان للترانزستورات والموسفيتات ومنظمات الفولتية متوسطة القدرة، وتحتويان مساحة معدنية كبيرة لتبديد الحرارة تظهر على اللوحة كمساحة نحاسية واسعة تساعد على تبريد العنصر أثناء الاختبار على لوحة التجارب.

أبرز المزايا

  • تدعم حزمتي SOT89 وSOT223 على نفس اللوحة.
  • مساحة نحاسية واسعة تحت العنصر تساعد على تبديد الحرارة.
  • تحويل إلى ثلاثة أطراف بخطوة 2.54mm متوافقة مع breadboard.
  • مناسبة لمنظمات الفولتية السطحية والموسفيتات متوسطة القدرة.
  • مساحات لحام كبيرة نسبياً تسهّل العمل بالكاوية اليدوية.
  • لوحة FR4 متينة تتحمّل حرارة اللحام المتكرر.

الاستخدامات الشائعة

  • اختبار منظمات الفولتية السطحية مثل عائلات LDO على لوحة التجارب.
  • تجربة ترانزستورات وموسفيتات SOT223 في النماذج الأولية.
  • استبدال عنصر THT نادر بمكافئ سطحي متوفر.
  • ورش الصيانة عند فحص عنصر سطحي خارج اللوحة الأصلية.

ملاحظة: عند لحام الطرف المعدني العريض سخّن المساحة النحاسية جيداً أولاً لأنها تسحب الحرارة بسرعة، ولا تطل زمن التسخين على أرجل الإشارة؛ ومع أحمال التيار المرتفع أضف مساحة تبريد أو حدّ من زمن الاختبار.

What's in the box

لوحة تحويل SOT89/SOT223 إلى DIP3 واحدة (بدون هيدر)

Specifications

Supported packagesSOT89 و SOT223
Output packageDIP3 بخطوة 2.54mm
Pin count3
Board materialFR4 بطبقة نحاس
مساحة التبريدمساحة نحاسية واسعة أسفل العنصر
معالجة السطحمساحات لحام مقصدرة
العناصر المتوافقةمنظمات فولتية وترانزستورات وموسفيتات متوسطة القدرة
التوافقbreadboard وقوالب 2.54mm القياسية
طريقة التوصيلهيدر ذكر 2.54mm أو أسلاك ملحومة
الحجملوحة مصغّرة قريبة من أبعاد الحزمة
إعادة الاستخدامتتحمّل فك العنصر وإعادة لحام آخر
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0579

Questions about لوحة تحويل SOT89 وSOT223 إلى DIP3 بخطوة 2.54mm للعناصر السطحية | SOT89 / SOT223 To DIP3 2.54mm SMD Adapter PCB Board

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It supports SOT89 and SOT223 on the same board.
The listing says it is the adapter board without a header; connection uses a 2.54mm male header or soldered wires.
It helps dissipate the part's heat while testing on a breadboard.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.