SMD to DIP10 adapter board

لوحة تحويل SOT23 وSOP10 وMSOP10 إلى DIP10 بخطوة 0.5-0.95mm إلى 2.54mm | SOT23 / SOP10 / MSOP10 To DIP10 SMD Adapter PCB (0.5-0.95mm To 2.54mm)

⁨لوحة تحويل SOT23 وSOP10 وMSOP10 إلى DIP10 بخطوة 0.5-0.95mm إلى 2.54mm | SOT23 / SOP10 / MSOP10 To DIP10 SMD Adapter PCB (0.5-0.95mm To 2.54mm)⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Converts SOT23-10, SOP10, MSOP10 and UMAX to DIP10
  • 2.54mm output pitch
  • Supports lead pitches from 0.5mm to 0.95mm
  • FR4 board with printed numbering
  • Supplied without header
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Multi-package adapter board converting SOT23-10, SOP10, MSOP10 and UMAX chips to DIP10 at 2.54mm pitch, covering lead pitches from 0.5mm to 0.95mm.

This multi-package adapter board moves surface-mount chips in SOT23-10, SOP10, MSOP10 and UMAX packages to a DIP10 layout at 2.54mm pitch, which suits a breadboard. It supports lead pitches from 0.5mm to 0.95mm on the same pad area and lets you use modern chips that are not made in a DIP package at all.

According to the listing the board covers small chips such as op-amps, temperature sensors and analog-to-digital converters (ADC and DAC). Specifications: pin count 10, an FR4 board with a copper layer, graded tinned solder pads that make it easier to position the part with tweezers, printed numbering on the board, and a small size that keeps signal paths short. Connection is by a 2.54mm male header along the edges, and according to the listing the product is the board without a header.

Uses per the listing: trying surface-mount chips on a breadboard, building prototypes, replacing a damaged chip with a surface-mount equivalent inside an older device, and university labs and prototyping workshops. With 0.5mm pitch use a fine-tip iron, liquid flux and a little solder, fix the first and last pins diagonally before soldering the rest, and check for bridges with a magnifier and a meter in continuity mode before powering up. The condition is new with a 1-month warranty.

Suitable for

  • Trying surface-mount chips on a breadboard
  • Prototypes with small ADC and DAC chips
  • Replacing a damaged chip with a surface-mount equivalent
  • University labs and prototyping workshops

Seller's description

لوحة تحويل متعددة الحزم تنقل الشرائح السطحية بحزم SOT23-10 وSOP10 وMSOP10 وUMAX إلى نمط DIP10 بخطوة 2.54mm. تدعم خطوات أرجل من 0.5mm حتى 0.95mm على نفس المساحة، فتغطي عائلة كبيرة من الشرائح الصغيرة مثل مضخّمات العمليات وحساسات الحرارة والمحوّلات التماثلية الرقمية التي لا تتوفر بحزمة DIP.

أبرز المزايا

  • تدعم عدة حزم سطحية على لوحة واحدة: SOT23-10 وSOP10 وMSOP10 وUMAX.
  • تغطي خطوات أرجل من 0.5mm إلى 0.95mm.
  • تحوّل إلى DIP10 بخطوة 2.54mm المتوافقة مع breadboard.
  • تتيح استخدام شرائح حديثة لا تُصنع بحزمة DIP أصلاً.
  • مساحات لحام متدرّجة تسهّل وضع العنصر بالملقط قبل التثبيت.
  • حجم صغير يبقي أطراف الإشارة قصيرة ومناسبة للدوائر التماثلية.

الاستخدامات الشائعة

  • تجربة مضخّمات العمليات وحساسات الحرارة السطحية على breadboard.
  • بناء نماذج أولية بشرائح ADC وDAC صغيرة الحزمة.
  • استبدال شريحة تالفة بمكافئ سطحي داخل جهاز قديم.
  • مختبرات الجامعات وورش النماذج الأولية.

ملاحظة: مع خطوة 0.5mm استخدم كاوية رفيعة وفلَكس سائل وقصديراً قليلاً، وثبّت الطرف الأول والأخير قطرياً قبل لحام البقية؛ وافحص الجسور بعدسة مكبّرة وبجهاز القياس على وضع الاستمرارية قبل التشغيل.

What's in the box

لوحة تحويل SMD إلى DIP10 واحدة (بدون هيدر)

Specifications

Supported packagesSOT23-10 / SOP10 / MSOP10 / UMAX
Supported lead pitches0.5mm - 0.95mm
Output packageDIP10 بخطوة 2.54mm
Pin count10
Board materialFR4 بطبقة نحاس
معالجة السطحمساحات لحام مقصدرة
ترقيم الأرجلمطبوع على اللوحة
التوافقbreadboard وقواعد DIP وقوالب 2.54mm
طريقة التوصيلهيدر ذكر 2.54mm على الحافتين
الحجملوحة مصغّرة تبقي مسارات الإشارة قصيرة
الاستخدام الأساسينماذج أولية واختبار شرائح صغيرة الحزمة
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0565

Questions about لوحة تحويل SOT23 وSOP10 وMSOP10 إلى DIP10 بخطوة 0.5-0.95mm إلى 2.54mm | SOT23 / SOP10 / MSOP10 To DIP10 SMD Adapter PCB (0.5-0.95mm To 2.54mm)

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
SOT23-10, SOP10, MSOP10 and UMAX, according to the listing.
From 0.5mm to 0.95mm.
No, the listing says it is the adapter board without a header; it uses a 2.54mm male header soldered to the edges.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.