SOP28 to DIP28 adapter board

لوحة تحويل SOP28 إلى DIP28 للشرائح السطحية بخطوة 0.65mm و1.27mm | SOP28 To DIP28 SMD IC Adapter PCB Converter Board (0.65mm / 1.27mm)

⁨لوحة تحويل SOP28 إلى DIP28 للشرائح السطحية بخطوة 0.65mm و1.27mm | SOP28 To DIP28 SMD IC Adapter PCB Converter Board (0.65mm / 1.27mm)⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Converts SOP28 to DIP28
  • 2.54mm output pitch
  • Supports 0.65mm and 1.27mm lead pitches
  • FR4 board with printed lead numbering
  • Supplied without header
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Adapter board converting SOP28 surface-mount chips to DIP28 at 2.54mm pitch, supporting 0.65mm and 1.27mm lead pitches, for chip programming and prototyping.

This adapter board moves surface-mount chips in the SOP28 package to a DIP28 layout at 2.54mm pitch, and the same board supports 0.65mm and 1.27mm lead pitches, so it covers wide and narrow SSOP and SOP packages according to the listing. It lets you test a surface-mount chip on a breadboard or fit it into a DIP28 socket inside an older device.

According to the listing the board is useful for reading and programming surface-mount memory and EEPROM chips on older programmers, testing SOP28 chips before designing the final board, replacing an old DIP chip with a surface-mount equivalent, and for repair workshops and cloning chip contents. Specifications: pin count 28, an FR4 board with a copper layer, tinned solder pads, printed lead numbering that marks pin number 1, and it withstands re-soldering more than once.

Connection uses a 2.54mm male header soldered along both edges, and according to the listing the product is the adapter board without a header, so the header must be sourced separately. Before soldering, align pin number 1 between the chip and the board because reversing it damages the chip at power-up, and use flux and a chisel-tip iron with the drag method to avoid bridges between closely spaced leads. The condition is new with a 1-month warranty.

Suitable for

  • Programming and reading surface-mount memory chips
  • Testing SOP28 chips on a breadboard
  • Replacing an old DIP chip with a surface-mount equivalent
  • Repair workshops and chip cloning

Seller's description

لوحة تحويل تنقل الشرائح السطحية بحزمة SOP28 إلى نمط DIP28 بخطوة 2.54mm، وتدعم خطوتي أرجل 0.65mm و1.27mm على نفس اللوحة فتغطي حزم SSOP وSOP العريضة والضيقة. تسمح باختبار شريحة سطحية على لوحة التجارب أو تركيبها في قاعدة DIP28 داخل جهاز قديم، وهي أداة أساسية في البرمجة والإصلاح واستنساخ الذاكرة.

أبرز المزايا

  • تدعم خطوة 0.65mm و1.27mm معاً على نفس اللوحة.
  • تحوّل حزمة SOP28 السطحية إلى نمط DIP28 بخطوة 2.54mm.
  • تسمح بتركيب الشريحة في قاعدة DIP قياسية أو على breadboard.
  • مفيدة في قراءة وبرمجة شرائح الذاكرة السطحية على المبرمجات القديمة.
  • مساحات لحام واضحة مع ترقيم أرجل مطبوع يقلل أخطاء الاتجاه.
  • لوحة FR4 متينة تتحمّل إعادة اللحام أكثر من مرة.

الاستخدامات الشائعة

  • قراءة وبرمجة شرائح الذاكرة والـ EEPROM السطحية.
  • اختبار شرائح SOP28 على لوحة التجارب قبل تصميم اللوحة النهائية.
  • استبدال شريحة DIP قديمة بمكافئ سطحي متوفر في السوق.
  • ورش صيانة الأجهزة واستنساخ محتوى الشرائح.

ملاحظة: تأكد من محاذاة الطرف رقم 1 بين الشريحة واللوحة قبل اللحام لأن عكس الاتجاه يتلف الشريحة عند التشغيل؛ استخدم فلَكس وكاوية مشطوفة الرأس مع طريقة السحب لتفادي الجسور بين الأرجل المتقاربة.

What's in the box

لوحة تحويل SOP28 إلى DIP28 واحدة (بدون هيدر)

Specifications

Input packageSOP28 / SSOP28 سطحية
Output packageDIP28 بخطوة 2.54mm
Supported lead pitches0.65mm و1.27mm
Pin count28
Board materialFR4 بطبقة نحاس
معالجة السطحمساحات لحام مقصدرة
ترقيم الأرجلمطبوع على اللوحة لتحديد الطرف رقم 1
التوافققواعد DIP28 وbreadboard ومبرمجات الشرائح
طريقة التوصيلهيدر ذكر 2.54mm يُلحم على الحافتين
إعادة الاستخدامتتحمّل إعادة اللحام أكثر من مرة
الاستخدام الأساسيبرمجة وقراءة الشرائح السطحية والنماذج الأولية
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0521

Questions about لوحة تحويل SOP28 إلى DIP28 للشرائح السطحية بخطوة 0.65mm و1.27mm | SOP28 To DIP28 SMD IC Adapter PCB Converter Board (0.65mm / 1.27mm)

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
It supports both 0.65mm and 1.27mm lead pitches on the same board.
No, the listing says it is the adapter board without a header; a 2.54mm male header is soldered along the edges.
Yes, the listing states compatibility with DIP28 sockets, breadboards and chip programmers.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.