Soldering tip refresher

معجون تنشيط أسنان مكواة اللحام 10g لإزالة الأكسدة | Soldering Iron Tip Refresher Tinner Paste 10g for Oxidised Tips

⁨معجون تنشيط أسنان مكواة اللحام 10g لإزالة الأكسدة | Soldering Iron Tip Refresher Tinner Paste 10g for Oxidised Tips⁩ — ⁨4,888 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Tip refresher paste, 10g
  • Removes oxidation from iron tips
  • Dip the hot tip for seconds
  • Recommended temperature about 300°C
  • New, with a 1-month warranty
4,888IQD5,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,888IQD

Its price has held at 5,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

10g tinner paste that re-wets oxidised soldering iron tips when a hot tip is dipped into it for seconds, for iron tips and rework stations.

This is a tinner paste that restores an oxidised soldering iron tip that has lost its ability to hold solder. You dip the hot tip into the paste for seconds; it removes the black oxide layer and leaves a shiny layer of solder that restores wetting and heat transfer to the joint.

The tin weighs 10g, a small metal tin with a lid, and the listing says it lasts for many uses and saves buying new tips. It suits soldering iron tips and rework stations, and helps rescue blackened tips, keep the tip maintained at the end of a session, and tin a new tip before first use.

Recommended use: tip at about 300°C and no hotter, without prolonging the dip beyond a few seconds. Afterwards wipe the tip on a damp sponge or brass cleaning wire, then wet it with a little solder. Store the tin tightly closed away from heat. It is new with a 1-month warranty.

Suitable for

  • Rescuing blackened tips
  • Routine tip maintenance after soldering
  • Tinning a new tip

Seller's description

معجون قصدير يُعيد تأهيل سن مكواة اللحام المؤكسد الذي فقد قدرته على حمل القصدير. يُغمس السن الساخن في المعجون لثوانٍ فيزيل طبقة الأكسدة السوداء ويترك مكانها طبقة قصدير لامعة تعيد الترطيب وانتقال الحرارة الجيد إلى نقطة اللحام. عبوة 10g تكفي لمئات المرات وتوفر ثمن أسنان جديدة.

أبرز المزايا

  • يعيد ترطيب السن المؤكسد بدلًا من استبداله بسن جديد
  • يعمل خلال ثوانٍ بمجرد غمس السن الساخن فيه
  • يحسّن انتقال الحرارة فتصبح نقاط اللحام أنظف وأسرع
  • عبوة 10g صغيرة تكفي لعدد كبير جدًا من المرات
  • يصلح لأسنان المكاوي العادية ومحطات اللحام

الاستخدامات الشائعة

  • إنقاذ الأسنان التي اسودّت وفقدت قدرتها على حمل القصدير
  • الصيانة الدورية للسن في نهاية جلسة اللحام
  • ورش الصيانة التي تعمل بأسنان لحام باستمرار
  • تجهيز السن الجديد بالقصدير قبل أول استخدام

ملاحظة: استخدمه والسن عند 300°C تقريبًا لا أكثر، ولا تُطل الغمس فوق بضع ثوانٍ. امسح السن بعدها بإسفنجة رطبة أو بسلك التنظيف النحاسي ثم رطّبه بقليل من القصدير.

What's in the box

علبة معجون تنشيط أسنان اللحام بوزن 10g

Specifications

Weight10g
Product typeمعجون تنشيط وترطيب أسنان اللحام
Recommended temperatureنحو 300°C
Suitable forأسنان مكاوي اللحام ومحطات إعادة العمل
الوظيفةإزالة الأكسدة وإعادة ترطيب السن بالقصدير
طريقة الاستخدامغمس السن الساخن في المعجون لثوانٍ
الأثرتحسين انتقال الحرارة وثبات نقاط اللحام
بعد الاستخداممسح السن ثم ترطيبه بالقصدير
العبوةعلبة معدنية صغيرة بغطاء
التخزينمحكمة الإغلاق بعيدًا عن الحرارة
CategoryManufacturing, Maker, Lab & Test Equipment
More categoriesLab power supplies and measurement instruments
ConditionNew
Warranty1-month warranty
SKUNTK-0155

Questions about معجون تنشيط أسنان مكواة اللحام 10g لإزالة الأكسدة | Soldering Iron Tip Refresher Tinner Paste 10g for Oxidised Tips

It currently costs 4,888 IQD (was 5,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Dip the hot tip into the paste for seconds, then wipe it on a damp sponge or brass wire and wet it with a little solder.
The listing recommends about 300°C and no more.
Yes, the listing says it suits soldering iron tips and rework stations.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.