GenericSolenoid valve

صمام ملف مغناطيسي كهربائي بلاستيكي 80 مم مغلق عادة 0.5 بوصة 220 فولت | Plastic Solenoid Valve

⁨صمام ملف مغناطيسي كهربائي بلاستيكي 80 مم مغلق عادة 0.5 بوصة 220 فولت | Plastic Solenoid Valve⁩ — ⁨7,175 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Plastic solenoid valve, model X7 GDC0004-004
  • Normally closed design
  • Runs on 220V
  • 0.5 inch diameter and 80mm length
  • New, with a 1-month warranty
7,175IQD10,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

7,175IQD

Its price has held at 10,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

Plastic normally closed solenoid valve, 0.5 inch with an 80mm length, running on 220V to control liquid flow.

This is an electric solenoid valve with a plastic body, model X7 GDC0004-004, running on 220V alternating current to control liquid flow in industrial and household systems and in automation projects. The listing says it combines light weight with tolerance for usual operating pressures, but it does not give the operating pressure in numbers.

The valve is normally closed: it stays fully shut while it has no power, and when 220V arrives the solenoid coil energises and opens the valve so liquid can pass. That is useful when you want the line to close by itself if power is lost or the circuit is switched off.

The valve diameter is 0.5 inch and its overall length is 80mm, so check that the fittings in your piping match 0.5 inch before ordering. The listing does not state which liquids are allowed or the maximum temperature, so do not expose it to heat beyond what the plastic body tolerates, and ask the shop through chat if your liquid is unusual.

During installation, disconnect the power before any maintenance, tighten the inlet and outlet fittings to prevent leaks that could reach electrical parts, and fit it where it is easy to inspect. The item is new according to the listing, supplied as one valve, with a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Controlling liquid flow in automation systems
  • Opening and closing a water line electrically
  • Household and industrial piping of 0.5 inch

Seller's description

صمام الملف المغناطيسي الكهربائي البلاستيكي 80 مم

يوفر صمام الملف المغناطيسي الكهربائي (Solenoid Valve) طراز X7 GDC0004-004 تحكماً موثوقاً في تدفق السوائل ضمن الأنظمة الصناعية والمنزلية التي تعتمد على التيار المتردد بجهد 220 فولت. يتميز هذا الصمام بهيكل بلاستيكي متين يجمع بين خفة الوزن والقدرة على تحمل ضغوط التشغيل المعتادة، مما يجعله خياراً مثالياً لمشاريع الأتمتة التي تتطلب دقة في الفتح والإغلاق.

يعمل الصمام بنظام "مغلق عادة" (Normally Closed)، مما يعني أنه يظل في وضع الإغلاق التام طالما لم يتم تزويده بالطاقة الكهربائية. عند وصول التيار بجهد 220 فولت، يتم تنشيط الملف المغناطيسي ليفتح الصمام ويسمح بمرور السائل. بقطر 0.5 بوصة وطول إجمالي يبلغ 80 مم، يوفر هذا الصمام توافقاً ممتازاً مع معظم التمديدات القياسية، مما يسهل عملية دمجه في الأنظمة القائمة دون الحاجة لتعديلات معقدة.

نصائح السلامة والتركيب

نظراً لعمل الصمام بجهد 220 فولت، يجب توخي الحذر الشديد أثناء التوصيل الكهربائي والتأكد من فصل التيار قبل البدء بأي أعمال صيانة. تأكد من إحكام ربط الوصلات عند مدخل ومخرج الصمام لمنع أي تسريب قد يؤثر على المكونات الكهربائية المحيطة. يُنصح بتركيب الصمام في وضعية تسمح بسهولة الوصول إليه للفحص الدوري، مع التأكد من عدم تعرضه لدرجات حرارة تتجاوز قدرة تحمل الهيكل البلاستيكي.

  • الموديل: X7 GDC0004-004
  • الجهد الكهربائي: 220 فولت
  • القطر: 0.5 بوصة
  • الطول: 80 مم
  • الحالة: مغلق عادة (Normally Closed)
  • المادة: بلاستيك متين

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من Plastic Electric Magnetic Solenoid Valve 80mm Normally Closed 0.5 inch 220V GDC0004-004.

Specifications

BrandGeneric
ModelX7 GDC0004-004
Voltage220 فولت
Diameter0.5 بوصة
Length80 مم
Default stateمغلق عادة (Normally Closed)
Materialبلاستيك متين
الموديل أو اسم القطعةPlastic Electric Magnetic Solenoid Valve 80mm Normally Closed 0.5 inch 220V GDC0004-004
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X406BE307358

Questions about صمام ملف مغناطيسي كهربائي بلاستيكي 80 مم مغلق عادة 0.5 بوصة 220 فولت | Plastic Solenoid Valve

It currently costs 7,175 IQD (was 10,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Normally closed; it opens when 220V power is applied.
The diameter is 0.5 inch and the overall length is 80mm, according to the listing.
It uses 220V, according to the listing.
The listing does not specify liquid types or maximum temperature, so ask the shop through chat before use.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.