Potentiometer

مقاومة متغيرة RV09 عمودية بقيمة 10kΩ وعمود بارتفاع 12.5mm | RV09 Vertical Potentiometer 10K with 12.5mm Shaft

⁨مقاومة متغيرة RV09 عمودية بقيمة 10kΩ وعمود بارتفاع 12.5mm | RV09 Vertical Potentiometer 10K with 12.5mm Shaft⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • RV09 potentiometer, 10kΩ
  • Shaft height 12.5mm
  • Vertical THT mounting, 3 pins
  • Rotation angle about 270 degrees
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Miniature RV09 potentiometer, 10kΩ, with a 12.5mm shaft and 3 pins for vertical soldering on the board, new with a 1-month warranty.

This is a miniature RV09-family potentiometer with a value of 10kΩ. It is soldered vertically on the board so its shaft points upward with a height of 12.5mm. It combines the size of a trimmer with ease of hand use, so it can be turned by finger or with a small knob without needing a screwdriver, which helps on crowded boards that need frequent adjustment.

Specifications: the body is miniature at about 9 × 9 mm, saving board space, and it has 3 THT pins for direct soldering in a vertical position. The B linear taper suits adjustment and control circuits, and a rotation angle of about 270 degrees gives enough adjustment resolution. The track material is carbon, tolerance is ±20% typical, and power dissipation is low, so it is for signal and adjustment circuits rather than power. Operating temperature runs from -25°C to +85°C.

Typical uses are setting sensitivity and threshold points on sensor boards, volume control on small boards and radios, adjusting lighting brightness and motor speed in Arduino projects, and as a manual analogue input on prototypes and breadboards.

Soldering note from the listing: a body this size is small and heat sensitive, so use a moderate-temperature iron and do not spend long on any one pin, so the plastic does not soften and the pin shift inside the body. The item is new and comes as one RV09 potentiometer of 10kΩ, with a 1-month warranty. The listing does not mention a knob and does not include one in the contents.

Suitable for

  • Setting sensitivity on sensor boards
  • Volume control on small boards
  • Adjusting brightness and motor speed in Arduino projects

Seller's description

مقاومة متغيرة مصغّرة من عائلة RV09 بقيمة 10kΩ وجسم صغير يقارب 9mm، تُلحم عمودياً على اللوحة بحيث يبرز عمودها إلى الأعلى بارتفاع 12.5mm. تجمع بين حجم مقاومة الضبط وسهولة الاستخدام اليدوي، فيمكن تدويرها بالإصبع أو بمقبض صغير دون الحاجة إلى مفك. خيار عملي في اللوحات المزدحمة التي تحتاج ضبطاً متكرراً.

أبرز المزايا

  • قيمة 10kΩ بمنحنى خطي مناسب لدوائر الضبط والتحكم.
  • جسم مصغّر نحو 9mm يوفّر مساحة كبيرة على اللوحة.
  • عمود بارتفاع 12.5mm يسمح بالضبط باليد أو بمقبض صغير.
  • ثلاثة أطراف THT للحام المباشر بوضع عمودي على اللوحة.
  • زاوية دوران نحو 270 درجة تعطي تدرجاً كافياً في الضبط.

الاستخدامات الشائعة

  • ضبط الحساسية ونقطة العتبة في لوحات الحساسات.
  • التحكم بمستوى الصوت في اللوحات الصغيرة والمذياع.
  • ضبط سطوع الإضاءة وسرعة المحركات في مشاريع Arduino.
  • دخل تناظري يدوي في النماذج الأولية ولوحات التجارب.

ملاحظة: جسم هذا المقاس صغير وحساس للحرارة، فاستخدم مكواة بحرارة معتدلة ولا تُطل زمن اللحام على الطرف الواحد حتى لا يلين البلاستيك ويتحرك الطرف داخل الجسم.

What's in the box

مقاومة متغيرة RV09 واحدة بقيمة 10kΩ

Specifications

ModelRV09 (مقاومة متغيرة مصغّرة)
Nominal value10kΩ
TaperB خطي
Shaft height12.5mm
Body sizeنحو 9 × 9 mm
Pins3 أطراف
Track materialكربوني
طريقة التركيبTHT عمودي على اللوحة
زاوية الدوراننحو 270 درجة
نسبة التسامح±20% نموذجية
قدرة التبديدمنخفضة، لدوائر الإشارة والضبط
مدى حرارة التشغيل-25°C إلى +85°C
CategorySemiconductors, ICs & Electronic Components
More categoriesPassive electronic components
ConditionNew
Warranty1-month warranty
SKUNTK-0583

Questions about مقاومة متغيرة RV09 عمودية بقيمة 10kΩ وعمود بارتفاع 12.5mm | RV09 Vertical Potentiometer 10K with 12.5mm Shaft

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
10kΩ with a shaft height of 12.5mm, according to the listing.
No, the listing says it can be turned by finger or with a small knob without a screwdriver.
The body is small and heat sensitive, so use a moderate-temperature iron and do not linger on one pin, according to the listing.
The listed contents are one RV09 potentiometer only; the listing does not mention a knob.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.