RKCDigital temperature controller
منظم حرارة رقمي PID طراز REX-C100 بشاشة مزدوجة ومخرج Relay مع حساس Thermocouple K | RKC REX-C100 Digital PID Temperature Controller, Relay Output, K-Type Thermocouple
منظم حرارة رقمي PID طراز REX-C100 بشاشة مزدوجة ومخرج Relay مع حساس Thermocouple K | RKC REX-C100 Digital PID Temperature Controller, Relay Output, K-Type Thermocouple — 23,000 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- PID control with Auto-Tune
- Dual display showing PV and SV
- Relay output about 3A at 250V AC
- K-type thermocouple included
- 48x48mm front panel
Ask about stock or request a better price
Price
23,000IQDIts price has held at 23,000 IQD for the last 11 days.
About this item
RKC REX-C100 digital PID temperature controller with dual displays, relay output and a K-type thermocouple, suited to ovens and incubators.
The RKC REX-C100 is a digital temperature controller using PID control. Instead of harsh on and off switching, it compares the reading with the set value and adjusts the output on-time gradually, which reduces oscillation and overshoot around the setpoint. It also supports ON/OFF mode alongside Auto-Tune.
The display is dual: the upper red line shows the actual temperature PV and the lower green line shows the target value SV, so you see both at once. Adjustment is by front buttons that change SV and the PID parameters.
The output is a relay contact rated at about 3A at 250V AC. It is meant for control, so it is best used to drive a contactor or an SSR rather than carrying a heater load directly. A K-type thermocouple is included; fix its tip in contact with the object being measured and away from direct flame to avoid false readings.
The front panel measures 48x48mm in DIN 1/16 size and mounts in a cutout on the enclosure front with fixing clamps. Wiring is through screw terminals at the back for supply, sensor and output. The supply is AC voltage as given on the data plate on the side of the unit, so check it before powering up.
Listed uses include ovens, incubators, heat presses and small production lines. The condition is new with a 1 months warranty according to the listing, and the box contains one REX-C100 controller with a K-type thermocouple.
Suitable for
- Controlling the temperature of drying and soldering ovens
- Incubators and water or oil heaters
- Heat presses and sealing machines
Seller's description
منظم حرارة رقمي بخوارزمية PID طراز REX-C100 بحجم لوحة أمامية 48x48mm وشاشتين: العليا حمراء تعرض الحرارة الفعلية PV والسفلى خضراء تعرض القيمة المطلوبة SV. يقارن القراءة بالقيمة المضبوطة ويعدّل زمن تشغيل الخرج تدريجياً بدل الوصل والفصل الحاد، فيقلّل التذبذب والتجاوز حول نقطة الضبط. يأتي بمخرج ريليه وحساس حراري Thermocouple نوع K.
أبرز المزايا
- تحكم PID مع ضبط تلقائي Auto-Tune يقلّل التجاوز والتذبذب حول درجة الضبط
- شاشتان تعرضان الحرارة الفعلية PV والمطلوبة SV في الوقت نفسه
- مخرج ريليه بتلامس يتحمل نحو 3A عند 250V AC لتشغيل كونتاكتور أو SSR
- حساس Thermocouple نوع K مرفق يغطي مدى حرارة يصل إلى مئات الدرجات
- حجم لوحة قياسي 48x48mm يركّب في فتحة قياسية على واجهة الصندوق
- أزرار أمامية لضبط درجة الحرارة ومعاملات التحكم وحفظها
الاستخدامات الشائعة
- أفران التجفيف وأفران اللحام وأفران المعالجة الحرارية
- الحاضنات وأجهزة تسخين المياه والزيوت
- مكابس النقل الحراري وآلات التغليف واللحام الحراري
- خطوط الإنتاج الصغيرة والورش التي تحتاج ضبطاً حرارياً دقيقاً
ملاحظة: مخرج الريليه مخصص للتحكم لا لتمرير حمل المسخن مباشرة، فاستخدمه لتشغيل كونتاكتور أو SSR بتقييم مناسب. وثبّت رأس الحساس ملامساً للجسم المراد قياسه وبعيداً عن اللهب المباشر لتفادي القراءات الكاذبة.
What's in the box
منظم حرارة REX-C100 واحد مع حساس Thermocouple نوع K
Specifications
| Brand | RKC |
|---|---|
| Model | REX-C100 |
| Control type | PID مع Auto-Tune إضافة إلى وضع ON/OFF |
| Output type | ريليه Relay Contact |
| Output contact rating | نحو 3A عند 250V AC |
| Included sensor | Thermocouple نوع K |
| Front panel size | 48x48mm |
| الشاشة | مزدوجة، حمراء للقيمة الفعلية PV وخضراء للقيمة المطلوبة SV |
| طريقة التركيب | داخل فتحة على واجهة الصندوق مع مشابك تثبيت |
| طريقة الضبط | أزرار أمامية لتغيير SV ومعاملات PID |
| فولتية التغذية | تيار متردد حسب لوحة البيانات على جانب الجهاز |
| التوصيل | أطراف لولبية على الجهة الخلفية للتغذية والحساس والخرج |
| الاستخدام النموذجي | الأفران والحاضنات والمكابس الحرارية وخطوط الإنتاج الصغيرة |
| Category | Manufacturing, Maker, Lab & Test Equipment |
| More categories | Lab power supplies and measurement instruments |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0433 |



