Soldering iron tip
رأس بديل لمكواة اللحام لقدرة 40 و60 واط | Replacement Soldering Iron Tip for 40W & 60W Irons
رأس بديل لمكواة اللحام لقدرة 40 و60 واط | Replacement Soldering Iron Tip for 40W & 60W Irons — 3,613 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Fits 40W and 60W irons
- Plated copper construction
- Quick fitting with no special tools
- Replaceable consumable part
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,613IQDIts price has held at 4,250 IQD for the last 11 days.
About this item
Replacement soldering tip for 40W and 60W irons, made of plated copper and fitted quickly without special tools to replace worn tips.
This is a replacement soldering tip for common 40W and 60W irons. Its job is to take the place of the old tip once it wears out and stops accepting solder, so the iron works again without replacing the whole iron. Keeping a spare tip in the toolkit saves downtime on urgent jobs.
The fitting steps in the listing: let the iron cool completely, pull the old tip out of the heating tube, slide the new one in and tighten the retaining ring firmly enough, since a loose tip transfers heat poorly. Fitting is quick and needs no special tools. On first heating the listing recommends coating the tip with a layer of solder so it does not oxidise.
The key check before buying is the diameter of your old tip: the listing warns that 40W and 60W irons sometimes use different diameters even when the outer shape looks similar. It does not give this tip's diameter, length or tip shape, so ask the shop through chat and include a photo of your old tip if you can.
The material is plated copper, with good heat transfer per the listing. It suits repair and assembly workshops, home soldering and a toolkit bag. It is new, the box holds one tip, and a 1-month warranty applies.
Suitable for
- Replacing a worn soldering tip
- Repair and assembly workshops
- A spare tip in the toolkit bag
- Home soldering jobs
Seller's description
رأس لحام بديل يناسب المكاوي بقدرة 40 و60 واط من الطرازات الشائعة في السوق. توفر رأس احتياطي في العدة يوفّر وقت التوقف: عندما يتوقف الرأس القديم عن قبول القصدير في منتصف عمل عاجل، يكون الاستبدال مسألة دقيقتين بدل تأجيل العمل إلى اليوم التالي. يُركَّب بسحب الرأس القديم من أنبوب التسخين بعد تبريده تماماً وإدخال الجديد مكانه، ويجب شدّ حلقة التثبيت بإحكام معقول لأن الرأس المرتخي ينقل الحرارة بصورة سيئة.
أبرز المزايا
- متوافق مع مكاوي 40 و60 واط الشائعة
- يعيد قدرة المكواة على قبول القصدير
- انتقال حرارة جيد إلى الوصلة
- تركيب سريع بلا أدوات خاصة
- سعر منخفض لقطعة مستهلكة
الاستخدامات الشائعة
- استبدال الرؤوس المتآكلة
- ورش الصيانة والتجميع
- رأس احتياطي في حقيبة العدة
- أعمال اللحام المنزلية
ملاحظة: تحقّق من قطر الرأس القديم قبل الشراء؛ مكاوي 40 و60 واط تستعمل أقطاراً مختلفة أحياناً رغم تشابه شكل المكواة الخارجي.
What's in the box
رأس بديل لمكواة لحام واحد
Specifications
| Compatible power | 40 و60 واط |
|---|---|
| Material | نحاس مطلي |
| Type | رأس بديل لمكواة لحام |
| انتقال الحرارة | جيد |
| التركيب | سريع بلا أدوات |
| طبيعة القطعة | مستهلكة قابلة للاستبدال |
| التنبيه قبل الشراء | التحقق من قطر الرأس القديم |
| التوصية | التقصير بالقصدير عند أول تسخين |
| الاحتياط | يفضَّل الاحتفاظ برأس احتياطي |
| الاستعمال النموذجي | الصيانة وأعمال اللحام العامة |
| Category | Tools, Soldering & Workshop Equipment |
| More categories | Soldering tips & consumables |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0731 |


