PVC heat shrink tube
أنبوب انكماش حراري PVC بعرض مسطّح 80 ملم بطول متر واحد | PVC Heat Shrink Tube, 80mm Flat Width, 1 Meter
أنبوب انكماش حراري PVC بعرض مسطّح 80 ملم بطول متر واحد | PVC Heat Shrink Tube, 80mm Flat Width, 1 Meter — 2,275 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- PVC material
- Flat width 80mm
- Length 1 meter
- Takes packs with a BMS board
- Sizing rule: circumference ÷ 2 + margin
Ask about stock or request a better price
Price
2,275IQDIts price has held at 3,250 IQD for the last 11 days.
About this item
PVC heat shrink tube with an 80mm flat width and 1 meter length, suited to 18650 packs with a BMS protection board and cordless tool packs.
This is a PVC heat shrink tube with a flat width of 80mm and a length of 1 meter. The listing says the 80mm width takes packs together with a BMS board and fills the gap between the 70 and 100mm sizes. Its job is insulating and holding the pack.
According to the listing it gives full electrical insulation to the assembly, fits quickly with a hot air gun, and leaves a tight, clean finished sleeve. The uses listed are 18650 packs with a BMS protection board, cordless tool packs, medium project assemblies and re-wrapping packs after maintenance.
For choosing the size, the listing gives a rule: pack circumference ÷ 2 + margin. Measure your pack's circumference and apply the rule; if the result is close to 80mm this size fits, otherwise look at the 70 or 100mm size.
The product is new, and the contents are one PVC heat shrink tube with an 80mm width and a length of 1 meter. The listing does not state the thickness, colour or shrink ratio, so ask the shop through chat if those matter to you.
Suitable for
- Wrapping 18650 packs with a BMS protection board
- Wrapping cordless tool packs
- Re-wrapping packs after maintenance
Seller's description
أنبوب انكماش حراري من PVC بعرض مسطّح 80 ملم وطول متر، يقع بين مقاسي 70 و100 ملم ويناسب الحزم التي يعجز عنها المقاس الأصغر بقليل. المسافة الإضافية مهمة عند وجود لوحة حماية BMS ملصقة على جانب الحزمة، إذ تزيد سماكتها الكلية وتمنع دخولها في أنبوب أضيق.
أبرز المزايا
- عرض 80 ملم يستوعب الحزم مع لوحة BMS
- يسدّ الفجوة بين مقاسي 70 و100 ملم
- عزل كهربائي كامل للتجميعة
- تركيب سريع بمسدس هواء ساخن
- يمنح مظهراً نهائياً نظيفاً
الاستخدامات الشائعة
- حزم 18650 مع لوحة حماية BMS
- حزم الأدوات اللاسلكية
- تجميعات المشاريع المتوسطة
- إعادة تغليف الحزم بعد الصيانة
ملاحظة: قِس محيط الحزمة الفعلي واقسمه على اثنين لتعرف العرض المسطّح المطلوب، ثم أضف هامشاً صغيراً؛ الأنبوب الأضيق تماماً لا يمكن تركيبه أصلاً.
What's in the box
أنبوب انكماش حراري PVC بعرض 80 ملم وطول متر واحد
Specifications
| Material | PVC |
|---|---|
| Flat width | 80 ملم |
| Length | متر واحد |
| Suitable packs | حزم 18650 مع لوحة BMS |
| Installation | مسدس هواء ساخن |
| Function | عزل وتثبيت الحزمة |
| النوع | أنبوب انكماش حراري PVC |
| طريقة اختيار المقاس | محيط الحزمة ÷ 2 + هامش |
| المظهر النهائي | غلاف محكم نظيف |
| الاستعمال النموذجي | حزم الأدوات اللاسلكية والمشاريع |
| Category | Electronic Materials, Adhesives & Consumables |
| More categories | Heat-shrink tubing & sleeving |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0714 |




