Battery heat shrink wrap
كم حراري PVC لتغليف حزم البطاريات بعرض مسطّح 340mm وطول 1 متر | PVC Heat Shrink Battery Wrap, 340mm Lay-Flat Width, 1 Metre
كم حراري PVC لتغليف حزم البطاريات بعرض مسطّح 340mm وطول 1 متر | PVC Heat Shrink Battery Wrap, 340mm Lay-Flat Width, 1 Metre — 4,888 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- 340mm lay-flat width, 1 metre long
- Maximum pack circumference about 680mm
- Continuous wrap with electrical insulation
- Helps against dust and moisture
- New, with 1 months warranty
Ask about stock or request a better price
Price
4,888IQDIts price has held at 5,750 IQD for the last 11 days.
About this item
PVC heat shrink sleeve, 340mm lay-flat width and 1 metre long, for wrapping very large battery packs in a continuous insulating cover.
A PVC heat shrink sleeve with a 340mm lay-flat width and 1 metre length, described in the listing as one of the widest sizes used for battery packs. The maximum pack circumference is about 680mm and the opened diameter about 216mm, so it suits very large packs and packs built from several units grouped together. One continuous wrap gives electrical insulation and a cleaner finish than winding overlapping tapes.
It is heated with hot air spread evenly, cut with ordinary scissors before heating, and must not be heated with an open flame. The listing advises disconnecting the charger and insulating the terminals before wrapping, and not heating the area over the BMS board directly for long. Listed uses are solar energy storage packs, light electric vehicle batteries and prismatic LiFePO4 cells. It is new with a 1 months warranty, one 1 metre piece.
Suitable for
- Wrapping solar energy storage packs
- Light electric vehicle batteries
- Wrapping prismatic LiFePO4 cells
Seller's description
كم حراري PVC بعرض مسطّح 340mm وطول متر واحد، من أعرض المقاسات المستخدمة في تغليف حزم البطاريات. يعطي محيطاً يصل إلى نحو 680mm أي قطراً يقارب 216mm عند الفرد، ما يجعله مناسباً للحزم الكبيرة جداً وللحزم المكوّنة من عدّة وحدات مجمّعة معاً. يمنح الغلاف الواحد المتصل عزلاً كهربائياً ومظهراً نهائياً أنظف من لفّ عدة أشرطة متداخلة.
أبرز المزايا
- عرض مسطّح 340mm يستوعب محيطاً يصل إلى نحو 680mm
- غلاف واحد متصل يغني عن لفّ عدة أشرطة عازلة
- يستوعب حزماً مجمّعة من عدّة وحدات في هيكل واحد
- عزل كهربائي متجانس على كامل المحيط
- يقلّل تسرّب الغبار والرطوبة إلى داخل الحزمة
الاستخدامات الشائعة
- حزم تخزين طاقة كبيرة لأنظمة الطاقة الشمسية
- بطاريات المركبات الكهربائية الخفيفة والعربات
- حزم صناعية مجمّعة من عدّة وحدات فرعية
- تغليف مجموعات خلايا LiFePO4 مربّعة الشكل
ملاحظة: الحزم بهذا الحجم تخزّن طاقة كبيرة، لذا افصل الشاحن وتأكد من عزل الأقطاب قبل التغليف، ولا تسخّن الغلاف فوق منطقة لوحة BMS مباشرة لفترة طويلة كي لا تتأثّر مكوّناتها بالحرارة.
What's in the box
قطعة واحدة بطول متر من الكم الحراري PVC بعرض مسطّح 340mm.
Specifications
| Material | PVC حراري الانكماش |
|---|---|
| Lay-flat width | 340mm |
| Max pack circumference | نحو 680mm |
| Approx. opened diameter | نحو 216mm |
| Length | 1 متر |
| طريقة التطبيق | تسخين بالهواء الساخن مع توزيع متساوٍ |
| السعة العملية | حزم مجمّعة من عدّة وحدات فرعية |
| الوظيفة | عزل كهربائي وحماية من الغبار والرطوبة |
| احتياط الحرارة | تجنّب تسخين منطقة لوحة BMS لفترة طويلة |
| طريقة القص | مقص اعتيادي قبل التسخين |
| تحذير الاستخدام | لا يُسخَّن باللهب المكشوف |
| Category | Power, Charging, Batteries & Energy Electronics |
| More categories | Batteries and battery packs |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0435 |




