nRF24L01 adapter board

لوحة تهيئة لوحدة nRF24L01 مع منظم AMS1117 من 5V إلى 3.3V | nRF24L01 Socket Adapter Board with AMS1117 5V to 3.3V Regulator

⁨لوحة تهيئة لوحدة nRF24L01 مع منظم AMS1117 من 5V إلى 3.3V | nRF24L01 Socket Adapter Board with AMS1117 5V to 3.3V Regulator⁩ — ⁨2,763 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • AMS1117-3.3 regulator steps 5V down to 3.3V
  • 8-pin socket in a 2x4 layout
  • Accepts nRF24L01 and nRF24L01+
  • Filter capacitors on the supply line
  • New, with a 1-month warranty
2,763IQD3,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

2,763IQD

Its price has held at 3,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Socket adapter board for the nRF24L01 module with an AMS1117 regulator stepping 5V down to 3.3V, solving weak 3.3V supply on Arduino boards.

This is a small board carrying an 8-pin socket for an nRF24L01 module and an AMS1117 regulator that steps 5V down to 3.3V, with filter capacitors on the supply line. It is an adapter board for the module, not the wireless module itself, so you need an nRF24L01 module to fit onto it.

The listing explains the problem it solves: the 3.3V output on an Arduino board cannot supply the peak current the module draws while transmitting, causing dropped connections or failed initialization. The on-board AMS1117-3.3 regulator supplies enough current for transmit peaks, and the capacitors near the module stabilize the supply line and prevent restarts.

The socket is a 2x4 layout with 2.54mm pitch and accepts nRF24L01 and nRF24L01+ modules, in both standard and amplified versions. The output pins are VCC, GND, CE, CSN, SCK, MOSI, MISO and IRQ, and the SPI pins come out to a straight header that is easy to connect with breadboard wires.

Powering: feed the board from the 5V pin, not 3.3V. The signal pins stay at 3.3V logic, and the listing says the module tolerates 5V inputs while the MISO output stays at 3.3V, which an Arduino reads without trouble. It is used with Arduino UNO, Mega and Nano boards, for short-range wireless networks and remote controls. The item is new with a 1-month warranty.

Suitable for

  • Connecting nRF24L01 modules to Arduino boards
  • Short-range wireless networks between nodes
  • Remote controls, vehicles and robots

Seller's description

لوحة صغيرة تحمل مقبس 8 أطراف لوحدة nRF24L01 ومنظم AMS1117 يخفض 5V إلى 3.3V مع مكثفات ترشيح على خط التغذية. تحل المشكلة الأشهر مع هذه الوحدة، وهي عدم قدرة خرج 3.3V في لوحة Arduino على تجهيز ذروة التيار التي تسحبها الوحدة أثناء الإرسال، ما يسبب انقطاع الاتصال أو فشل التهيئة بالكامل.

أبرز المزايا

  • منظم AMS1117-3.3 على اللوحة يجهّز تياراً كافياً لذروة الإرسال
  • مكثفات ترشيح قريبة من الوحدة تثبّت خط التغذية وتمنع إعادة التشغيل
  • مقبس 8 أطراف بترتيب 2x4 يقبل وحدات nRF24L01 و nRF24L01+ مباشرة
  • تخرج أطراف SPI إلى هيدر مستقيم يسهل توصيله بأسلاك البردبورد
  • تُغذّى من طرف 5V في اللوحة التطويرية بدل طرف 3.3V الضعيف

الاستخدامات الشائعة

  • ربط وحدات nRF24L01 بلوحات Arduino UNO و Mega و Nano
  • بناء شبكات لاسلكية قصيرة المدى بين عدة عقد
  • أجهزة تحكم عن بعد ومركبات وروبوتات يتم قيادتها لاسلكياً

ملاknowledge

ملاحظة: غذِّ اللوحة من طرف 5V وليس من 3.3V، لكن انتبه إلى أن أطراف الإشارة تبقى بمنطق 3.3V؛ وحدة nRF24L01 تتحمل مداخل 5V لكن خرج MISO يبقى 3.3V وهو مستوى يقرأه Arduino بلا مشكلة.

What's in the box

لوحة تهيئة واحدة لوحدة nRF24L01 مع منظم AMS1117

Specifications

Functionتهيئة تغذية وحدة nRF24L01 من مصدر 5V
RegulatorAMS1117-3.3 خطي
Input voltage5V DC
Output voltage3.3V مثبتة
Socket8 أطراف بترتيب 2x4 وخطوة 2.54mm
CompatibilitynRF24L01 و nRF24L01+ بنسختيه العادية وذات المضخم
الترشيحمكثفات على خط التغذية قرب الوحدة
أطراف الإخراجVCC، GND، CE، CSN، SCK، MOSI، MISO، IRQ
مستوى الإشارة3.3V على خطوط SPI
الاستخداملوحات Arduino والمتحكمات ذات تغذية 5V
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0508

Questions about لوحة تهيئة لوحدة nRF24L01 مع منظم AMS1117 من 5V إلى 3.3V | nRF24L01 Socket Adapter Board with AMS1117 5V to 3.3V Regulator

It currently costs 2,763 IQD (was 3,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
No, the box holds one adapter board only, and the wireless module is fitted separately, according to the listing.
From the 5V pin of the development board, not the 3.3V pin, according to the listing.
Yes, it accepts nRF24L01 and nRF24L01+ in both the standard and amplified versions.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.