EspressifDevelopment board

لوحة تطوير NodeMCU V3 بوحدة ESP8266 ESP-12E ومحوّل CH340 مع WiFi | NodeMCU V3 ESP8266 ESP-12E WiFi Development Board with CH340 USB Interface

⁨لوحة تطوير NodeMCU V3 بوحدة ESP8266 ESP-12E ومحوّل CH340 مع WiFi | NodeMCU V3 ESP8266 ESP-12E WiFi Development Board with CH340 USB Interface⁩ — ⁨6,525 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • ESP-12E module with ESP8266 at 80MHz
  • WiFi 802.11 b/g/n with PCB antenna
  • CH340 converter for direct USB programming
  • 3.3V logic, pins D0–D8 and analog input A0
  • New, with a 1 months warranty
6,525IQD7,250IQDخصم 10%In stock
1

Ask about stock or request a better price

Price

6,525IQD

Its price has held at 7,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

NodeMCU V3 development board with an ESP-12E module, ESP8266 controller, WiFi and a CH340 USB converter, suited to IoT projects and electronics experiments.

The NodeMCU V3 is a development board built around the ESP-12E module, which carries an ESP8266 controller running at 80MHz. It connects over WiFi 802.11 b/g/n on 2.4GHz and has a PCB antenna on the board itself, so no external antenna is needed. The listing names these WiFi modes: Station, Access Point and mixed mode, meaning the board can join an existing network or create its own.

In practice the board uses 3.3V logic and offers digital pins labelled D0–D8 that make breadboard wiring easy, one ADC input (A0) accepting up to 3.2V, plus I2C, SPI, UART and PWM interfaces. That is enough to read one analog sensor, switch a relay, fan or light, and connect a display or sensor over I2C or SPI. Note that the pins do not tolerate 5V, as the listing warns.

You program it directly over USB thanks to the CH340 converter (USB to UART), with no external programmer. The listing names Arduino IDE, NodeMCU Lua, MicroPython and ESPHome as supported environments. Power is 5V through USB or the VIN pin, and the listing recommends a supply of 500mA or more because the board draws a high momentary current while transmitting; a weak supply can cause repeated reboots.

The listing describes the product as new with a 1 months warranty, and the box holds one NodeMCU V3 development board. It does not state the flash memory size or whether header pins are soldered, so ask the shop through chat if that matters for your project.

Suitable for

  • Home automation and relay control over WiFi
  • Measuring stations that send data to cloud platforms
  • Student projects and IoT prototypes
  • Control panels for lights, fans and pumps

Seller's description

لوحة تطوير NodeMCU V3 مبنية على وحدة ESP-12E التي تحمل متحكم ESP8266 بتردد 80MHz مع WiFi بمعيار 802.11 b/g/n وهوائي مطبوع على اللوحة. تعمل بمنطق 3.3V وتوفّر أطراف GPIO رقمية ومدخلاً تناظرياً واحداً إضافة إلى منافذ I2C وSPI وUART، وتُبرمَج عبر منفذ USB بمحوّل CH340 من Arduino IDE أو بيئة NodeMCU Lua.

أبرز المزايا

  • وحدة ESP-12E بمتحكم ESP8266 وهوائي مطبوع على اللوحة
  • WiFi 802.11 b/g/n مدمج مع دعم أوضاع Station وAccess Point
  • محوّل CH340 للبرمجة المباشرة عبر USB دون مبرمجة خارجية
  • منظّم 3.3V على اللوحة وتغذية من USB أو طرف VIN
  • أطراف مرقّمة D0–D8 تسهّل التوصيل على لوحة التجارب
  • مدعومة بمكتبات واسعة في Arduino وESPHome وMicroPython

الاستخدامات الشائعة

  • أنظمة أتمتة المنزل والتحكم بالريلايات عبر WiFi
  • محطات قياس ترفع البيانات إلى خوادم أو منصات سحابية
  • مشاريع الطلبة والنماذج الأولية لإنترنت الأشياء
  • لوحات تحكم بالإنارة والمراوح والمضخات

ملاحظة: أطراف اللوحة 3.3V ولا تتحمل 5V، والمدخل التناظري A0 يقبل حتى 3.2V. تحتاج اللوحة تياراً لحظياً عالياً أثناء الإرسال، فاستخدم مصدراً يعطي 500mA على الأقل لتفادي إعادة الإقلاع.

What's in the box

لوحة تطوير NodeMCU V3 واحدة

Specifications

BrandEspressif
Wireless moduleESP-12E بمتحكم ESP8266
Processor frequency80MHz
WirelessWiFi 802.11 b/g/n على 2.4GHz
USB converterCH340 (USB إلى UART)
Logic voltage3.3V
Analog inputمدخل ADC واحد (A0) حتى 3.2V
Digital pinsأطراف مرقّمة D0–D8
Power5V عبر USB أو طرف VIN
الهوائيهوائي مطبوع على اللوحة (PCB)
الواجهات المدعومةI2C وSPI وUART وPWM
أوضاع WiFiStation وAccess Point والوضع المختلط
بيئات البرمجةArduino IDE وNodeMCU Lua وMicroPython وESPHome
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0143

Questions about لوحة تطوير NodeMCU V3 بوحدة ESP8266 ESP-12E ومحوّل CH340 مع WiFi | NodeMCU V3 ESP8266 ESP-12E WiFi Development Board with CH340 USB Interface

It currently costs 6,525 IQD (was 7,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Yes. The listing states a CH340 converter for programming over USB with no external programmer, from environments such as Arduino IDE and MicroPython.
No. The listing says the pins are 3.3V and do not tolerate 5V, and the analog input A0 accepts up to 3.2V.
Power is 5V via USB or the VIN pin, and the listing advises a source giving at least 500mA to avoid reboots.
The listing does not specify the flash size, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.