JSTJST connectors

موصلات JST قياس 1.25 ملم ثنائية الأطراف مع أسلاك وكابلات بطول 100 ملم | JST Connector with Wires

⁨موصلات JST قياس 1.25 ملم ثنائية الأطراف مع أسلاك وكابلات بطول 100 ملم | JST Connector with Wires⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • JST connectors at 1.25mm pitch
  • 2-Pin
  • Ready wires 100mm long
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

JST connectors with a 1.25mm pitch, 2 pins and ready-attached 100mm wires, suited to circuit boards and small projects.

This is a pair of ready-made JST connectors with pre-attached wires, with a pin pitch of 1.25mm, 2 pins (2-Pin) and a wire length of 100mm. The listing gives the full name as JST Connectors 1.25MM 2-Pin Connector with Wires Cables 100MM for Circuit Board Wholesale.

Having the wires attached already saves you the initial soldering of the connector. The description says the small connector size suits printed circuit boards and space-limited projects such as drones, wearables and small sensors, and that it can carry power or simple signals between components.

The most important check before buying is to match the 1.25mm pin pitch with the port on your board, since a different pitch prevents a firm fit, and then to confirm the number of pins. The listing does not state the voltage, current or wire thickness. When using it, insert the connector gently so the fine pins do not bend, keep the wires away from moving parts, and insulate the ends well if you cut the wires to prevent a short circuit.

The item is new according to the listing, one piece is in the box, and it has a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Connecting printed circuit boards
  • Drone and small sensor projects
  • Carrying power or simple signals between components

Seller's description

موصلات JST قياس 1.25 ملم ثنائية الأطراف

تعتبر موصلات JST بقياس 1.25 ملم خياراً مثالياً للمشاريع الإلكترونية الدقيقة التي تتطلب توصيلات موثوقة ومدمجة. يأتي هذا المنتج كزوج من الكابلات الجاهزة للاستخدام، حيث تم تصميمها بأسلاك متصلة مسبقاً بطول 100 ملم، مما يوفر الوقت والجهد في عمليات اللحام والتركيب. بفضل حجمها الصغير (1.25 ملم)، تعد هذه الموصلات مثالية للوحات الدوائر المطبوعة (PCBs) والمشاريع التي تعاني من ضيق المساحة، مثل الطائرات بدون طيار، الأجهزة القابلة للارتداء، والمستشعرات الصغيرة.

تتميز هذه الموصلات بكونها ثنائية الأطراف (2-Pin)، مما يجعلها مناسبة لتوصيل الطاقة أو الإشارات البسيطة بين المكونات المختلفة. الأسلاك المرفقة مرنة وذات جودة عالية، مما يضمن استقرار التوصيل الكهربائي ويقلل من احتمالية حدوث انقطاع في الإشارة. عند اختيار هذه الموصلات، تأكد من توافق المسافة بين الدبابيس (Pitch) مع المنفذ الموجود في لوحتك الإلكترونية لضمان تركيب محكم وآمن.

نصائح التركيب والتعامل

عند استخدام موصلات JST، يُنصح دائماً بإدخال الموصل في المنفذ المخصص له بلطف لضمان عدم ثني الدبابيس الدقيقة. تأكد من تثبيت الأسلاك بشكل جيد بعيداً عن الأجزاء المتحركة في مشروعك لتجنب الشد العرضي الذي قد يؤدي إلى تلف الموصل. في حال الحاجة إلى تقصير الأسلاك، تأكد من عزل نهايات الأسلاك بشكل جيد بعد القص لمنع حدوث أي تماس كهربائي غير مقصود.

  • نوع الموصل: JST Connector
  • قياس المسافة (Pitch): 1.25 ملم
  • عدد الأطراف: 2-Pin
  • طول الكابل: 100 ملم
  • الاستخدام: لوحات الدوائر المطبوعة والمشاريع الإلكترونية

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من JST Connectors 1.25MM 2-Pin Connector with Wires Cables 100MM for Circuit Board Wholesale.

Specifications

BrandJST
Connector typeJST Connector
Pitch1.25 ملم
Pins2-Pin
Cable length100 ملم
الموديل أو اسم القطعةJST Connectors 1.25MM 2-Pin Connector with Wires Cables 100MM for Circuit Board Wholesale
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X25E1485258B

Questions about موصلات JST قياس 1.25 ملم ثنائية الأطراف مع أسلاك وكابلات بطول 100 ملم | JST Connector with Wires

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Two pins (2-Pin) and a pitch of 1.25mm, according to the listing.
100mm, according to the listing.
The listing does not state voltage or current, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.