GenericPCB connector

موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم طرفين منحنيين 90 درجة | PCB Connector

⁨موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم طرفين منحنيين 90 درجة | PCB Connector⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • KF2EDGK model with 2 pins
  • 300V and 10A rating
  • 5.08mm pin spacing
  • Curved 90-degree design
  • New, with a 1-month warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

KF2EDGK PCB connector with 2 pins curved at 90 degrees and 5.08mm spacing, rated 300V and 10A, for wiring onto electronic boards.

This is a KF2EDGK printed circuit board connector with 2 pins, meant for wiring onto electronic boards and holding the connection firmly. The listing gives its technical name as 300V 10A KF2EDGK 5.08mm spaced PCB connector 2Pin curved 90deg, which is the name to use when searching for this exact part or comparing it with a similar one.

The listing states a rated operating voltage of 300V, a rated current of 10A and a pin spacing of 5.08mm. A 5.08mm spacing means the solder holes on your board must be spaced the same way so the connector sits in place without bending or forcing. The voltage and current are limits that your circuit load should not exceed.

The design is curved at 90 degrees, so wires enter from the side, parallel to the board surface, instead of straight up. That helps when vertical space inside an enclosure is tight or when you want to route wires toward the board edge. This version has 2 pins (2Pin), so make sure your circuit needs only that many connections.

Before buying, check these points: the 5.08mm spacing, the number of pins and whether the side-entry direction suits your board layout. The listing does not state the color, body material or allowed wire gauge, so ask the shop through chat if those matter for your project. When soldering, disconnect power from the board completely and use clean soldering tools.

The item is new according to the listing and comes with a 1-month warranty against factory operating defects; misuse is not covered. The box contains one connector.

Suitable for

  • Connecting power or signal wires to a printed board
  • Side-entry wiring in low-profile enclosures
  • Electronics repair and replacing a damaged connector

Seller's description

موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم طرفين منحنيين 90 درجة

يعد موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم طرفين منحنيين 90 درجة خياراً عملياً ومناسباً للعديد من التطبيقات الإلكترونية وهندسة الدوائر الكهربائية التي تتطلب توصيلات آمنة وثابتة على اللوحات المطبوعة. تم تصميم هذا الموصل بعناية فائقة لضمان توافق مثالي وسهولة في دمج المكونات ضمن مشاريع الأجهزة المختلفة بكل كفاءة واحترافية.

عند اختيار الموصل المناسب للوحات المطبوعة، من الضروري التأكد من مسافة التباعد وجهد التشغيل والتيار لضمان الأمان التام وعدم تجاوز القدرات الفنية المحددة. يساعد التصميم المنحني بزاوية 90 درجة في ترتيب الأسلاك وتنظيم المساحات الداخلية للأجهزة الضيقة أو المدمجة بشكل منظم ودقيق يقلل من الضغط على نقاط اللحام.

ينصح دائماً باتباع إجراءات السلامة القياسية عند التعامل مع المكونات الكهربائية، مثل فصل التيار الكهربائي تماماً قبل الشروع في عمليات اللحام أو التثبيت على اللوحة المطبوعة، واستخدام أدوات لحام نظيفة لتجنب تلف الأطراف أو الدوائر المجاورة.

المواصفات الفنية والخصائص الأساسية

  • جهد التشغيل المقدر: 300V
  • التيار المقدر: 10A
  • مسافة التباعد بين الأطراف: 5.08 ملم
  • عدد الأطراف: طرفين
  • التصميم: منحني بزاوية 90 درجة
  • طراز الموصل: KF2EDGK

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من 300V 10A KF2EDGK 5.08mm spaced PCB connector 2Pin curved 90deg.

Specifications

BrandGeneric
ModelKF2EDGK
Voltage300V
Current10A
Pin spacing5.08mm
Pin count2Pin
Anglecurved 90deg
الموديل أو اسم القطعة300V 10A KF2EDGK 5.08mm spaced PCB connector 2Pin curved 90deg
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X2FFF2E746DC

Questions about موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم طرفين منحنيين 90 درجة | PCB Connector

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Two pins (2Pin), according to the part name in the listing.
The listing states 300V and 10A.
The spacing is 5.08mm, so make sure your board holes match it.
The listing does not specify the color or material, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.