GenericPCB connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 7 أطراف منحنية 90 درجة | PCB Connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 7 أطراف منحنية 90 درجة | PCB Connector — 2,450 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- KF2EDGK model with 7 pins
- 300V and 10A rating
- 5.08mm pin spacing
- Horizontal wire routing at 90 degrees
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,450IQDIts price has held at 3,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
KF2EDGK PCB connector with 7 pins curved at 90 degrees and 5.08mm spacing, rated 300V and 10A.
The KF2EDGK connector with 7 pins is meant for projects that need precise connections on printed boards. The listing states it handles 300 volts and 10 amps, suits control circuits and small power systems, and gives the technical name 300V 10A KF2EDGK 5.08mm spaced PCB connector 7Pin curved 90deg.
The design is curved at 90 degrees, which routes wires horizontally parallel to the board, an important point in designs with tight vertical space. The pin spacing is 5.08mm, so make sure your board is designed for this spacing and for 7 pins.
For suitable performance, use wires that match the connector's current capacity. When soldering, avoid heating the pins for too long so the plastic insulator does not melt, and check the connections afterwards to make sure there is no accidental contact between neighboring pins. The listing does not state the color or the wire size in numbers, so ask the shop through chat if needed.
The item is new according to the listing, with a 1-month warranty against factory operating defects; misuse is not covered. The box contains a single piece.
Suitable for
- Control circuits and small power systems
- Designs with tight vertical space
- Replacing a connector with the same pin count and spacing
Seller's description
موصل لوحة مطبوعة KF2EDGK 7 أطراف
يعد موصل KF2EDGK خياراً ممتازاً للمشاريع التي تتطلب توصيلات دقيقة وموثوقة على اللوحات المطبوعة. بفضل قدرته على تحمل جهد 300 فولت وتيار 10 أمبير، يوفر هذا الموصل مرونة عالية في الاستخدام، سواء في دوائر التحكم أو أنظمة الطاقة الصغيرة، مما يجعله قطعة أساسية في حقيبة أدوات أي فني إلكترونيات.
يتميز الموصل بتصميم منحني بزاوية 90 درجة، مما يساعد في توجيه الأسلاك بشكل أفقي موازٍ للوحة، وهو أمر حيوي في التصاميم التي تعاني من ضيق المساحة الرأسية. المسافة بين الأطراف البالغة 5.08 ملم تضمن توافقاً واسعاً مع المكونات الأخرى الموجودة على اللوحة.
لضمان أفضل أداء، تأكد من أن الأسلاك المستخدمة تتناسب مع سعة التيار للموصل. عند اللحام، تجنب تسخين الأطراف لفترة طويلة جداً لمنع ذوبان العازل البلاستيكي. تأكد دائماً من فحص التوصيلات بعد الانتهاء للتأكد من عدم وجود تلامس غير مقصود بين الأطراف المجاورة.
المواصفات الفنية للموصل
- الجهد الكهربائي: 300 فولت
- التيار الكهربائي: 10 أمبير
- المسافة بين الأطراف: 5.08 ملم
- عدد الأطراف: 7 أطراف
- التصميم: منحني بزاوية 90 درجة
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 300V 10A KF2EDGK 5.08mm spaced PCB connector 7Pin curved 90deg.
Specifications
| Brand | Generic |
|---|---|
| Model | KF2EDGK |
| Voltage | 300 فولت |
| Current | 10 أمبير |
| Pin spacing | 5.08 ملم |
| Pin count | 7 أطراف |
| Design | منحني بزاوية 90 درجة |
| الموديل أو اسم القطعة | 300V 10A KF2EDGK 5.08mm spaced PCB connector 7Pin curved 90deg |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Printed circuit boards |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-X6D5DBF10A79 |




