GenericPCB connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 6 أطراف منحنية 90 درجة | PCB Connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 6 أطراف منحنية 90 درجة | PCB Connector — 2,450 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- KF2EDGK model with 6 pins
- 300V and 10A rating
- 5.08mm pin spacing
- Pins curved at 90 degrees
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,450IQDIts price has held at 3,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
KF2EDGK PCB connector with 6 pins curved at 90 degrees and 5.08mm spacing, rated 300V and 10A.
The KF2EDGK connector with 6 pins is meant for connecting external components to electronic circuits on a printed board. The listing states it handles 300 volts and 10 amps, and gives the technical name 300V 10A KF2EDGK 5.08mm spaced PCB connector 6Pin curved 90deg.
Its pins are curved at 90 degrees, which eases sideways wire connection. The pin spacing is 5.08mm, which the listing calls standard and easy for design and fitting, but you should check that the pin count of 6 suits your circuit and that your board holes use the same spacing.
When handling the connector, clean the printed board before soldering and use a suitable amount of solder for a good electrical connection and a strong mechanical hold. Avoid any mechanical strain on the connected wires so the solder does not come loose and the copper tracks on the board are not damaged. The listing does not state the color or wire size, so ask the shop through chat if needed.
The item is new according to the listing, with a 1-month warranty against factory operating defects; misuse is not covered. The box contains a single piece.
Suitable for
- Connecting external components to a circuit on a printed board
- Sideways wire connection in limited space
- Replacing a damaged connector with the same pin count
Seller's description
موصل لوحة مطبوعة KF2EDGK 6 أطراف
يوفر موصل KF2EDGK المخصص للوحات المطبوعة حلاً فعالاً لتوصيل المكونات الخارجية بالدوائر الإلكترونية. بفضل تصميمه الذي يتحمل 300 فولت و10 أمبير، يضمن هذا الموصل استقراراً عالياً في نقل التيار، مما يجعله مناسباً لمختلف التطبيقات التي تتطلب توصيلات آمنة ومستمرة.
يأتي الموصل بـ 6 أطراف منحنية بزاوية 90 درجة، مما يسهل عملية التوصيل الجانبي للأسلاك. المسافة بين الأطراف هي 5.08 ملم، وهي مسافة قياسية تسهل عملية التصميم والتركيب. عند اختيار هذا الموصل، تأكد من أن عدد الأطراف يتناسب مع متطلبات دائرتك الكهربائية لضمان التوصيل الصحيح.
عند التعامل مع هذا الموصل، يُنصح بالتأكد من نظافة اللوحة المطبوعة قبل اللحام. استخدم كمية مناسبة من القصدير لضمان اتصال كهربائي جيد وميكانيكي قوي. تأكد من عدم وجود أي ضغط ميكانيكي على الأسلاك المتصلة لتجنب فك اللحام أو تلف المسارات النحاسية على اللوحة.
المواصفات الفنية للموصل
- الجهد الكهربائي: 300 فولت
- التيار الكهربائي: 10 أمبير
- المسافة بين الأطراف: 5.08 ملم
- عدد الأطراف: 6 أطراف
- التصميم: منحني بزاوية 90 درجة
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 300V 10A KF2EDGK 5.08mm spaced PCB connector 6Pin curved 90deg.
Specifications
| Brand | Generic |
|---|---|
| Model | KF2EDGK |
| Voltage | 300 فولت |
| Current | 10 أمبير |
| Pin spacing | 5.08 ملم |
| Pin count | 6 أطراف |
| Design | منحني بزاوية 90 درجة |
| الموديل أو اسم القطعة | 300V 10A KF2EDGK 5.08mm spaced PCB connector 6Pin curved 90deg |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Printed circuit boards |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XD9D6BAF2B01 |




