GenericPCB connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 4 أطراف منحنية 90 درجة | PCB Connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 4 أطراف منحنية 90 درجة | PCB Connector — 2,100 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- KF2EDGK model with 4 pins
- 300V and 10A rating
- 5.08mm pin spacing
- Curved at 90 degrees
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,100IQDIts price has held at 3,000 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
KF2EDGK PCB connector with 4 pins curved at 90 degrees and 5.08mm spacing, rated 300V and 10A.
The KF2EDGK connector with 4 pins is a compact solution for connecting wires to printed boards. The listing states it handles 300 volts and 10 amps, and names it 300V 10A KF2EDGK 5.08mm spaced PCB connector 4Pin curved 90deg, so keep that name when comparing with similar parts.
The design is curved at 90 degrees, so wires enter from the side and stay parallel to the board surface, which suits sideways wire routing in a small space. The pin spacing is 5.08mm, so match it to your board holes, and make sure the pin count, which is 4, meets your circuit's need.
When fitting, seat the connector flat on the board and use a soldering iron at a suitable temperature to avoid damaging the plastic parts, and solder the pins well for long-term connection stability. After soldering, clean off flux residue to avoid corrosion of the contacts later. The listing does not state the color or wire size, so ask the shop through chat if needed.
The item is new according to the listing, with a 1-month warranty against factory operating defects; misuse is not covered. The box contains a single piece.
Suitable for
- Wiring onto a printed board in a small space
- Sideways wire routing where room is tight
- Replacing a damaged connector on an electronic board
Seller's description
موصل لوحة مطبوعة KF2EDGK 4 أطراف
يوفر موصل KF2EDGK ذو الـ 4 أطراف حلاً مدمجاً وعملياً لتوصيل الأسلاك باللوحات المطبوعة. بفضل تصميمه الذي يتحمل 300 فولت و10 أمبير، يعد هذا الموصل خياراً قوياً للتطبيقات التي تتطلب توصيلات كهربائية موثوقة في مساحة صغيرة. تصميمه المنحني بزاوية 90 درجة يجعله مناسباً جداً للتطبيقات التي تتطلب توجيهاً جانبياً للأسلاك.
المسافة بين الأطراف البالغة 5.08 ملم تجعل من السهل دمج هذا الموصل في معظم تصاميم اللوحات المطبوعة القياسية. عند اختيار هذا الموصل، تأكد من أن عدد الأطراف يلبي احتياجات دائرتك. يُنصح دائماً بالتأكد من جودة اللحام لضمان استقرار التوصيل الكهربائي على المدى الطويل.
عند تركيب الموصل، تأكد من تثبيته بشكل مستوٍ على اللوحة. استخدم مكواة لحام ذات درجة حرارة مناسبة لتجنب إتلاف المكونات البلاستيكية. بعد الانتهاء من اللحام، قم بتنظيف المنطقة من بقايا الفلاكس لضمان مظهر نظيف وتجنب أي تآكل مستقبلي لنقاط التلامس.
المواصفات الفنية للموصل
- الجهد الكهربائي: 300 فولت
- التيار الكهربائي: 10 أمبير
- المسافة بين الأطراف: 5.08 ملم
- عدد الأطراف: 4 أطراف
- التصميم: منحني بزاوية 90 درجة
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 300V 10A KF2EDGK 5.08mm spaced PCB connector 4Pin curved 90deg.
Specifications
| Brand | Generic |
|---|---|
| Model | KF2EDGK |
| Voltage | 300 فولت |
| Current | 10 أمبير |
| Pin spacing | 5.08 ملم |
| Pin count | 4 أطراف |
| Design | منحني بزاوية 90 درجة |
| الموديل أو اسم القطعة | 300V 10A KF2EDGK 5.08mm spaced PCB connector 4Pin curved 90deg |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Printed circuit boards |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XF58B0440145 |




