GenericPCB connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 3 أطراف منحنية 90 درجة | PCB Connector
موصل لوحة مطبوعة KF2EDGK 300V 10A بمسافة 5.08 ملم 3 أطراف منحنية 90 درجة | PCB Connector — 2,100 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- KF2EDGK model with 3 pins
- 300V and 10A rating
- 5.08mm pin spacing
- Curved at 90 degrees
- New, with a 1-month warranty
Ask about stock or request a better price
Price
2,100IQDIts price has held at 3,000 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
KF2EDGK PCB connector with 3 pins curved at 90 degrees and 5.08mm spacing, rated 300V and 10A.
The KF2EDGK connector with three pins (3Pin) is meant for simple applications that need electrical connections on printed boards. The listing states it handles 300 volts and 10 amps, and gives its technical name as 300V 10A KF2EDGK 5.08mm spaced PCB connector 3Pin curved 90deg.
The design is curved at 90 degrees, so wires enter from the side and free up space above the board, which suits places that need sideways wire routing. The pin spacing is 5.08mm, a standard spacing that matches printed boards designed for it.
When choosing the connector, make sure the pin count, which is 3 here, fits your circuit, and that your board holes use the same spacing. When fitting, align the pins carefully with the holes and solder them well, because a weak joint causes an intermittent connection. The listing does not state the connector color, material or wire size, so ask the shop through chat if needed.
The item is new according to the listing, with a 1-month warranty against factory operating defects; misuse is not covered. The box contains one piece.
Suitable for
- Simple electrical connections on a printed board
- Side wire routing to save space
- Replacing a damaged connector on an electronic board
Seller's description
موصل لوحة مطبوعة KF2EDGK 3 أطراف
يعد موصل KF2EDGK ذو الـ 3 أطراف خياراً ممتازاً للتطبيقات البسيطة التي تتطلب توصيلات كهربائية آمنة وموثوقة. بفضل قدرته على تحمل 300 فولت و10 أمبير، يوفر هذا الموصل أداءً مستقراً في مختلف الدوائر الإلكترونية. تصميمه المنحني بزاوية 90 درجة يجعله مثالياً للتركيب في الأماكن التي تتطلب توجيهاً جانبياً للأسلاك لتوفير المساحة.
المسافة بين الأطراف البالغة 5.08 ملم تضمن توافقاً ممتازاً مع اللوحات المطبوعة القياسية. عند اختيار هذا الموصل، تأكد من أن عدد الأطراف يتناسب مع متطلبات دائرتك. يُنصح دائماً بالتأكد من جودة اللحام لضمان استقرار التوصيل الكهربائي ومنع أي مشاكل ناتجة عن التوصيل الضعيف.
عند تركيب الموصل، تأكد من محاذاة الأطراف بدقة مع الفتحات الموجودة على اللوحة. استخدم كمية مناسبة من القصدير لضمان اتصال كهربائي جيد وميكانيكي قوي. تأكد من عدم وجود أي ضغط ميكانيكي على الأسلاك المتصلة لتجنب فك اللحام أو تلف المسارات النحاسية على اللوحة بمرور الوقت.
المواصفات الفنية للموصل
- الجهد الكهربائي: 300 فولت
- التيار الكهربائي: 10 أمبير
- المسافة بين الأطراف: 5.08 ملم
- عدد الأطراف: 3 أطراف
- التصميم: منحني بزاوية 90 درجة
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 300V 10A KF2EDGK 5.08mm spaced PCB connector 3Pin curved 90deg.
Specifications
| Brand | Generic |
|---|---|
| Model | KF2EDGK |
| Voltage | 300V |
| Current | 10A |
| Pin spacing | 5.08mm |
| Pin count | 3Pin |
| Angle | curved 90deg |
| الموديل أو اسم القطعة | 300V 10A KF2EDGK 5.08mm spaced PCB connector 3Pin curved 90deg |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Printed circuit boards |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-X50133C88FEB |




