GenericStepper motor driver

متحكم محرك خطوي A3967 V44 12264 | Stepper Motor Driver

⁨متحكم محرك خطوي A3967 V44 12264 | Stepper Motor Driver⁩ — ⁨8,713 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • A3967 EasyDriver V44 board
  • Wires easily to Arduino
  • Controls stepper motors
  • Compact design for robotics and automation
  • New, with a 1-month warranty
8,713IQD10,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

8,713IQD

Its price has held at 10,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

A3967 EasyDriver V44 board for controlling stepper motors, easy to wire to Arduino and other microcontrollers.

This is an A3967 EasyDriver V44 board for controlling stepper motors. The listing describes it as easy to wire and program, connecting directly to microcontrollers such as the Arduino with minimal wiring, which reduces wiring and programming complexity and saves circuit space.

Its compact design lets it fit into robotics projects, printing machines and automatic control systems that need precise, steady motor motion. The model named in the listing is the A3967 EasyDriver V44, and the part name carries the number 12264.

Before powering up, match the wiring to the diagram of the motor you will use, and start with low current settings, raising them gradually so the motor or board does not overheat. Provide a power supply suited to the requirements of both motor and board to avoid motion or sync problems. The listing does not state the voltage range or maximum current, so ask the shop through chat if you need them to choose a motor.

The item is new according to the listing, with a 1-month warranty against factory operating defects, and the box holds one piece.

Suitable for

  • Running stepper motors precisely
  • Robotics projects
  • Printing machines and automatic control systems

Seller's description

متحكم المحرك الخطوي A3967 V44

يعتبر كارت A3967 EasyDriver V44 الحل الأمثل للمهندسين والمبتكرين الذين يسعون للتحكم في المحركات الخطوية (Stepper Motors) بدقة وسهولة. تم تصميم هذا المتحكم ليكون سهل الربط والبرمجة، حيث يتيح للمستخدمين الاتصال المباشر مع المتحكمات الدقيقة مثل الأردوينو باستخدام خطين فقط، مما يوفر مساحة كبيرة في الدوائر الإلكترونية.

يتميز هذا الكارت بكونه مصمماً خصيصاً لتبسيط عملية تشغيل المحركات الخطوية، حيث يقلل من تعقيد الأسلاك والبرمجة المطلوبة. بفضل تصميمه المدمج، يمكن دمجه في مشاريع الروبوتات، الطابعات ثلاثية الأبعاد، وأنظمة التحكم الآلي التي تتطلب حركة دقيقة ومستقرة للمحركات.

عند تركيب المتحكم، تأكد من مطابقة توصيلات الأسلاك مع المخطط الخاص بالمحرك المستخدم. يُنصح دائماً بالبدء بإعدادات تيار منخفضة والتدرج بها لضمان عدم ارتفاع حرارة المحرك أو المتحكم. تأكد من توفير مصدر طاقة مناسب يتوافق مع متطلبات المحرك والمتحكم لضمان استقرار الأداء وتجنب أي مشاكل في التزامن أو الحركة.

خصائص المتحكم الفنية

  • الموديل: A3967 EasyDriver V44
  • سهولة الربط: يتصل بخطين فقط مع المتحكمات
  • التوافق: يعمل مع الأردوينو والمتحكمات الدقيقة
  • الاستخدام: تشغيل المحركات الخطوية بدقة
  • التصميم: مدمج ومخصص للمشاريع الإلكترونية

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من A3967 EasyDriver Stepper Motor Driver V44 12264.

Specifications

BrandGeneric
ModelA3967 EasyDriver V44
Connectionيتصل بخطين فقط مع المتحكمات
Compatibilityيعمل مع الأردوينو والمتحكمات الدقيقة
Part nameA3967 EasyDriver Stepper Motor Driver V44 12264
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X148F71D3148

Questions about متحكم محرك خطوي A3967 V44 12264 | Stepper Motor Driver

It currently costs 8,713 IQD (was 10,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
It controls stepper motors and connects to microcontrollers with minimal wiring, according to the listing.
Yes, the listing says it works with Arduino and microcontrollers.
The listing does not state the maximum current, so ask the shop through chat. It advises starting with low current settings.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.