GenericAluminum shell resistor
مقاومة غلاف ألومنيوم 0.1 أوم 50 واط | Aluminum Shell Resistor
مقاومة غلاف ألومنيوم 0.1 أوم 50 واط | Aluminum Shell Resistor — 3,500 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Low value of 0.1 ohm
- Maximum power rating of 50W
- Aluminum body for heat dissipation
- New, with a 1-month warranty
Ask about stock or request a better price
Price
3,500IQDIts price has held at 5,000 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
Aluminum shell power resistor, 0.1 ohm and rated 50W, suited to power control circuits and heat dissipation.
A power resistor with a value of 0.1 ohm and a maximum power rating of 50W, with an aluminum outer body that dissipates heat and helps keep performance stable under continuous electrical loads. The small 0.1 ohm value means a very low resistance, so it matters that you confirm it is exactly what your circuit calls for.
Check the resistance value and power rating against your circuit's requirements before ordering. It is advised to inspect the connections and fix the resistor to a metal surface or an extra heat sink if needed, to spread the heat and prevent surrounding components from overheating.
During installation, handle the terminals carefully to ensure a good electrical contact, and disconnect the power fully before any soldering or fastening. Use wires of a cross-section suited to the current passing to avoid power loss or abnormal heating at the connection points.
The listing does not state the tolerance, dimensions or terminal type, so ask the shop through chat if you need them. One piece comes in the box, new and with a 1-month warranty against manufacturing operating defects.
Suitable for
- Power control circuits
- High heat dissipation applications
- Industrial and electronic uses
Seller's description
مقاومة غلاف ألومنيوم 0.1 أوم 50 واط
تعد مقاومة غلاف ألومنيوم 0.1 أوم 50 واط مكوناً إلكترونياً أساسياً مصمماً للتعامل مع تطبيقات الطاقة العالية بكفاءة. بفضل هيكلها الخارجي المصنوع من الألومنيوم، توفر هذه المقاومة قدرة ممتازة على تبديد الحرارة، مما يضمن استقرار الأداء عند العمل تحت أحمال كهربائية مستمرة. إنها الخيار الأمثل للمهندسين والفنيين الذين يبحثون عن دقة وموثوقية في دوائر التحكم بالطاقة.
عند اختيار هذا النوع من المقاومات، يجب التأكد من مطابقة قيمة المقاومة (0.1 أوم) وقدرة التحمل (50 واط) لمتطلبات دائرتك الكهربائية بدقة. يُنصح دائماً بفحص التوصيلات والتأكد من تثبيت المقاومة على سطح معدني أو مشتت حراري إضافي إذا لزم الأمر، لضمان توزيع الحرارة بشكل مثالي ومنع ارتفاع درجة حرارة المكونات المحيطة.
تتطلب عملية التركيب التعامل بحذر مع أطراف التوصيل لضمان اتصال كهربائي جيد. تأكد من فصل التيار الكهربائي تماماً قبل البدء بأي عمليات لحام أو ربط. يُفضل استخدام أسلاك ذات مقطع عرضي مناسب يتحمل التيار المار عبر المقاومة لتجنب أي فقدان في الطاقة أو حدوث سخونة غير طبيعية في نقاط التوصيل.
المواصفات الفنية للمقاومة
- قيمة المقاومة: 0.1 أوم
- قدرة التحمل القصوى: 50 واط
- تصميم غلاف خارجي من الألومنيوم
- مثالية لتطبيقات تبديد الحرارة العالية
- هيكل متين للاستخدامات الصناعية والإلكترونية
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من 0.1 ohm 50W Power Aluminum Shell Resistor.
Specifications
| Brand | Generic |
|---|---|
| Resistance | 0.1 أوم |
| Maximum power | 50 واط |
| Shell material | ألومنيوم |
| Part name | 0.1 ohm 50W Power Aluminum Shell Resistor |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Semiconductors, ICs & Electronic Components |
| More categories | Passive electronic components |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XA422335045B |




