GenericOptocoupler

مقاومة ضوئية أوكوبلور MOC3062 SMD-6 | Optocoupler

⁨مقاومة ضوئية أوكوبلور MOC3062 SMD-6 | Optocoupler⁩ — ⁨2,100 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • MOC3062 optocoupler in SMD-6 package
  • Optical isolator for switching control
  • Compact design that saves board space
  • Suited to applications needing precise electrical isolation
  • New, with a 1 month warranty
2,100IQD3,000IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,100IQD

Its price has held at 3,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

MOC3062 optocoupler in an SMD-6 package that acts as a light-based isolator between digital control circuits and AC loads, suited to compact circuit boards.

The MOC3062 SMD-6 optocoupler is an electronic component used for electrical switching control. It combines optical isolation with a small footprint thanks to the SMD-6 package. Its job is to sit between digital logic circuits and AC loads so that electrical interference and voltage shocks on the load side do not reach the control circuit, which helps keep the electronic system stable.

The SMD-6 package means the part is a surface-mount component soldered directly onto the board surface, which suits boards with limited space. Before buying, make sure your board design is made for this package style, since it will not fit a board prepared for through-hole legs. When installing, check the traces carefully to avoid accidental contact between pins; the accuracy of the soldering has a direct effect on stability and component life.

For installation the listing recommends a soldering station with accurate temperature control to avoid thermal stress on the body, cleaning the board afterwards to remove flux residue that can cause leakage, and checking the circuit diagram so the input and output pins are connected correctly, with enough clearance between high-voltage and low-voltage tracks. The listing does not state the voltage, current or current transfer ratio, so if those values matter for your design, ask the shop through chat or check the datasheet.

The part is new and comes as 1 piece of MOC3062 SMD-6 Optocoupler, with a shop warranty of 1 month against manufacturing operating defects; misuse is not covered.

Suitable for

  • Isolating digital control circuits from AC loads
  • Switching control on compact electronic boards
  • Applications that need precise electrical isolation

Seller's description

مقاومة ضوئية أوكوبلور MOC3062 SMD-6

يعد MOC3062 SMD-6 Optocoupler حلاً متطوراً للتحكم في التبديل الكهربائي، حيث يجمع بين كفاءة العزل الضوئي وصغر الحجم بفضل تصميمه من نوع SMD-6. هذا المكون مصمم خصيصاً ليكون وسيطاً آمناً بين دوائر المنطق الرقمي وأحمال التيار المتردد، مما يمنع انتقال أي تداخل كهربائي أو صدمات جهدية قد تؤثر على استقرار النظام الإلكتروني الخاص بك.

يُعد هذا الأوكوبلور خياراً ممتازاً للمهندسين والمصممين الذين يعملون على لوحات إلكترونية ذات مساحة محدودة. عند دمجه في تصميمك، تأكد من فحص مسارات التوصيل على اللوحة لضمان عدم وجود تلامس غير مقصود بين أطراف التوصيل، حيث أن دقة اللحام في المكونات السطحية (SMD) تلعب دوراً حاسماً في استقرار الأداء وطول عمر المكون.

نصائح التعامل والتركيب

عند تركيب MOC3062، استخدم محطة لحام ذات تحكم دقيق في درجة الحرارة لتجنب الإجهاد الحراري على هيكل المكون. تأكد من تنظيف اللوحة جيداً بعد عملية اللحام لإزالة بقايا الفلاكس التي قد تسبب تسريباً كهربائياً. يُفضل دائماً مراجعة مخطط الدائرة للتأكد من توصيل أطراف الإدخال والإخراج بشكل صحيح، مع مراعاة توفير مسافة أمان كافية بين مسارات الجهد العالي والمنخفض على اللوحة المطبوعة.

  • الموديل: MOC3062
  • نوع التغليف: SMD-6
  • يعمل كعازل ضوئي للتحكم في التبديل
  • تصميم مدمج يوفر مساحة على لوحات الدوائر
  • مناسب للتطبيقات التي تتطلب عزلاً كهربائياً دقيقاً

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من MOC3062 SMD-6 Optocoupler.

Specifications

BrandGeneric
ModelMOC3062 SMD-6 Optocoupler
PackageSMD-6
Functionيعمل كعازل ضوئي للتحكم في التبديل
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X3CC938BC776

Questions about مقاومة ضوئية أوكوبلور MOC3062 SMD-6 | Optocoupler

It currently costs 2,100 IQD (was 3,000 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
It uses an SMD-6 package, a surface-mount part soldered onto the board surface.
It works as an optical isolator for switching control, separating digital logic circuits from AC loads, according to the listing.
The listing describes an SMD-6 package, which is for surface mounting, so make sure your board is designed for it. Ask the shop through chat for any other details.
The listing does not state voltage or current values, so ask the shop through chat or check the datasheet.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.