Gas and smoke sensor

حساس غاز ودخان MQ-2 للكشف عن LPG والبيوتان والهيدروجين | MQ-2 Smoke and Combustible Gas Sensor (LPG, Butane, Hydrogen)

⁨حساس غاز ودخان MQ-2 للكشف عن LPG والبيوتان والهيدروجين | MQ-2 Smoke and Combustible Gas Sensor (LPG, Butane, Hydrogen)⁩ — ⁨4,463 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • SnO2 semiconductor for combustible gases
  • Detects smoke, LPG, butane, propane, hydrogen and methane
  • Analog output that varies with concentration
  • 5V DC heater drawing about 150mA
  • Initial warm-up of up to 24 hours
4,463IQD5,250IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,463IQD

Its price has held at 5,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

MQ-2 SnO2 semiconductor sensor detecting smoke, LPG, butane, propane, hydrogen and methane with an analog output.

A gas sensor from the MQ family, the MQ-2, built on a layer of tin dioxide SnO2 whose resistance changes on contact with combustible gases. It detects smoke, LPG, butane, propane, hydrogen and methane, and gives an analog output that varies with concentration.

It has an internal heater coil at 5V DC drawing about 150mA that must be powered continuously for the sensing element to work properly. The sensor needs an initial warm-up that can take up to 24 hours before its reading stabilizes. The typical detection range is hundreds to thousands of ppm, response time is a few seconds after gas exposure, and the operating temperature range is -10°C to +50°C.

Readout uses a load resistor with an ADC input or a comparator board, and the analog output lets you set the alarm threshold in software. It mounts with THT pins and an optional socket base, and suits Arduino and ESP32 projects.

An important caution from the listing: the sensor is not selective, meaning it responds to several gases together, so do not rely on it as a certified safety measuring device. Uses named include gas leak alarms in kitchens and storerooms, household smoke detectors, and monitoring combustible gases in workshops and generators. The item is new, the contents are one sensor, and the stated warranty is 1 month.

Suitable for

  • Gas leak alarms in kitchens and storerooms
  • Household smoke detectors and safety projects
  • Monitoring combustible gases in workshops and generators
  • Arduino and ESP32 alarm system projects

Seller's description

حساس غاز من عائلة MQ يعتمد على طبقة من ثاني أكسيد القصدير SnO2 تتغير مقاومتها عند ملامسة الغازات القابلة للاشتعال. يكشف الدخان وغاز البترول المسال LPG والبيوتان والبروبان والهيدروجين والميثان بحساسية جيدة، ويعطي خرجاً تناظرياً يتناسب مع تركيز الغاز. يحتوي على ملف تسخين داخلي يجب تشغيله باستمرار ليعمل العنصر الحساس بشكل صحيح.

أبرز المزايا

  • يكشف الدخان و LPG والبيوتان والبروبان والهيدروجين والميثان.
  • مدى كشف نموذجي يمتد من مئات إلى آلاف الـ ppm.
  • خرج تناظري يسمح بضبط عتبة الإنذار برمجياً حسب الحاجة.
  • ملف تسخين يعمل بـ 5V ويسحب نحو 150mA أثناء التشغيل.
  • عمر تشغيلي طويل واستجابة سريعة عند ارتفاع التركيز.
  • يعمل مع لوحة المقارن الجاهزة أو مباشرة مع مدخل ADC عبر مقاومة حمل.

الاستخدامات الشائعة

  • أجهزة إنذار تسرب الغاز في المطابخ والمخازن.
  • كواشف الدخان المنزلية ومشاريع السلامة.
  • مراقبة الغازات القابلة للاشتعال في الورش والمولدات.
  • مشاريع Arduino و ESP32 لأنظمة الإنذار المتصلة.

ملاحظة: يحتاج الحساس فترة تسخين أولية طويلة قد تصل إلى 24 ساعة قبل أن تستقر قراءته، كما أنه غير انتقائي أي يستجيب لعدة غازات معاً، فلا تعتمد عليه كجهاز قياس معتمد للسلامة.

What's in the box

حساس غاز MQ-2 واحد

Specifications

Sensor typeشبه موصل SnO2 للغازات القابلة للاشتعال
Output typeتناظري يتغير مع التركيز
Heater voltage5V DC
Heater currentنحو 150mA
Initial warm-upحتى 24 ساعة لاستقرار القراءة
Operating temperature-10°C إلى +50°C
الغازات المكتشفةدخان و LPG وبيوتان وبروبان وهيدروجين وميثان
مدى الكشف النموذجيمئات إلى آلاف الـ ppm
زمن الاستجابةثوانٍ قليلة بعد التعرض للغاز
الانتقائيةغير انتقائي، يستجيب لعدة غازات
طريقة القراءةمقاومة حمل مع مدخل ADC أو لوحة مقارن
التركيبأطراف THT مع حامل قاعدة اختياري
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0458

Questions about حساس غاز ودخان MQ-2 للكشف عن LPG والبيوتان والهيدروجين | MQ-2 Smoke and Combustible Gas Sensor (LPG, Butane, Hydrogen)

It currently costs 4,463 IQD (was 5,250 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Smoke, LPG, butane, propane, hydrogen and methane.
No, the listing warns that it is not selective and responds to several gases at once, so do not rely on it as a certified safety measuring device.
An initial warm-up of up to 24 hours before the reading stabilizes.
A 5V DC heater drawing about 150mA.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.