Triac driver optocoupler

عازل ضوئي MOC3022 لقدح التراياك حزمة DIP-6 | MOC3022 Optocoupler Triac Driver DIP-6

⁨عازل ضوئي MOC3022 لقدح التراياك حزمة DIP-6 | MOC3022 Optocoupler Triac Driver DIP-6⁩ — ⁨1,925 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Triac-output optocoupler, DIP-6 package
  • 10mA trigger current, 400V blocking voltage
  • No zero-crossing, for phase-angle control
  • Output surge current only about 1A
  • New, with a 1 months warranty
1,925IQD2,750IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,925IQD

Its price has held at 2,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

MOC3022 triac-output optocoupler in a DIP-6 package that triggers a power triac with full isolation from 220V mains, with 10mA trigger current and no zero-crossing.

The MOC3022 is a triac-output optocoupler from the MOC302x family in a DIP-6 package, used to trigger a power triac with full isolation between the low-voltage control circuit and 220V mains. Internally it has an infrared LED and a photo-triac with a 400V blocking voltage; 10mA of LED current is enough to trigger it, and the maximum forward LED current is 60mA.

The 3022 version has no zero-crossing circuit (Non Zero-Crossing), which allows phase-angle control and gradual dimming, so it suits light dimmer circuits and motor speed regulation. If you need triggering at the zero crossing, the listing does not name a version with that feature. The compatible alternatives named are the MOC3021 with a 15mA trigger current and the MOC3023 with a 5mA trigger current.

It does not drive the load directly: its surge current ITSM is limited to about 1A peak for a short pulse. Use it to trigger a power triac such as the BTA16 or BT136 through a limiting resistor of about 330Ω between the output and the triac gate on 220V, with a snubber network for inductive loads. It has 6 pins in a DIP-6 package and mounts through-hole by soldering or in a DIP socket. It also suits hand-built solid-state relays (SSR). The listing is new with a 1 months warranty and contains one optocoupler.

Suitable for

  • Triggering power triacs such as the BTA16 and BT136 in 220V circuits
  • Light dimmer circuits and motor speed regulation
  • Isolating microcontroller outputs from AC loads
  • Hand-built solid-state relays (SSR)

Seller's description

عازل ضوئي بمخرج تراياك من عائلة MOC302x في حزمة DIP-6، يُستخدم لقدح تراياك القدرة مع عزل كامل بين دائرة التحكم منخفضة الفولتية وشبكة 220V. يحتوي داخلياً على ليد باعث للأشعة تحت الحمراء وتراياك ضوئي بفولتية حجب 400V، ويكفي تيار 10mA على الليد لقدحه. النسخة 3022 بلا دائرة عبور صفري، ما يتيح التحكم بزاوية الطور وتنظيم القدرة.

أبرز المزايا

  • تيار قدح منخفض 10mA يمكن توفيره من طرف متحكم مباشرة
  • فولتية حجب للمخرج 400V تناسب شبكة 220V المتردد
  • عزل عالٍ بين جانب التحكم وجانب القدرة يحمي المتحكم
  • بلا دائرة عبور صفري، فيصلح للتحكم بزاوية الطور وخفت الإنارة
  • حزمة DIP-6 قياسية تُركّب على قاعدة أو تُلحم مباشرة

الاستخدامات الشائعة

  • قدح تراياك قدرة مثل BTA16 وBT136 في دوائر 220V
  • دوائر خفت الإنارة (Dimmer) وتنظيم سرعة المحركات
  • عزل مخارج المتحكمات عن الأحمال المتردة
  • مفاتيح الحالة الصلبة SSR المصنّعة يدوياً

ملاحظة: لا يشغّل الحمل مباشرة، فتياره اللحظي محدود بنحو 1A فقط؛ استخدمه لقدح تراياك قدرة عبر مقاومة تحديد (نحو 330Ω على شبكة 220V) مع شبكة Snubber للأحمال الحثية.

What's in the box

عازل ضوئي MOC3022 واحد بحزمة DIP-6

Specifications

Typeعازل ضوئي بمخرج تراياك (Triac Driver Optocoupler)
Zero-crossing circuitغير متوفرة (Non Zero-Crossing)
Trigger current IFT10mA
Output blocking voltage400V
Output surge current ITSM1A ذروي (نبضة قصيرة)
Max forward LED current60mA
PackageDIP-6 (6 أطراف)
Recommended trigger resistorنحو 330Ω
Compatible alternativesMOC3021 (15mA) وMOC3023 (5mA)
الاستخدام النموذجيقدح تراياك قدرة مثل BTA16 وBT136
التحكم بالطوريدعم التحكم بزاوية الطور والخفت التدريجي
طريقة التركيبThrough-Hole باللحام أو على قاعدة DIP
CategorySemiconductors, ICs & Electronic Components
More categoriesSemiconductors
ConditionNew
Warranty1-month warranty
SKUNTK-0403

Questions about عازل ضوئي MOC3022 لقدح التراياك حزمة DIP-6 | MOC3022 Optocoupler Triac Driver DIP-6

It currently costs 1,925 IQD (was 2,750 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
No, its surge current is limited to about 1A. The listing says to use it to trigger a power triac through a limiting resistor of about 330Ω on 220V mains.
No, the 3022 version has no zero-crossing circuit, which allows phase-angle control and dimming.
The listing names the MOC3021 (15mA trigger current) and the MOC3023 (5mA trigger current).
The listing gives typical use for triggering power triacs such as the BTA16 and BT136.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.