Mini breadboard

بردبورد صغير بـ170 نقطة توصيل بخطوة 2.54mm | Mini Solderless Breadboard 170 Tie-Points

⁨بردبورد صغير بـ170 نقطة توصيل بخطوة 2.54mm | Mini Solderless Breadboard 170 Tie-Points⁩ — ⁨2,275 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 170 tie points in a small size
  • Standard 2.54mm pitch
  • Center channel for DIP chips
  • No soldering needed and reusable
  • New, with a 1-month warranty
2,275IQD3,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,275IQD

Its price has held at 3,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Mini breadboard with 170 tie points and 2.54mm pitch for building and testing simple circuits without soldering.

This is a mini breadboard with 170 tie points and a standard 2.54mm pitch, which lets you build and test circuits without soldering. The inner rows are connected horizontally in groups of 5 points on both sides of the center channel, and the channel is made to take DIP chips.

Its small size suits simple circuits and projects that need an extra breadboard next to the main board, such as a trial circuit around a single chip or a quick test of sensors and voltage dividers. Other listed uses include a side add-on beside an Arduino or ESP32 board and training workshops and short student projects.

In build terms, the internal clips are plated phosphor bronze and the body is ABS plastic, and an adhesive strip on the back lets you fix it to a base or the project enclosure. The suitable wire is solid 22AWG to 24AWG, and the listing warns against thick wires above 20AWG because they widen the clips and lose contact. Components pull out without damage, so reusability is high.

One point needs attention: the listing's feature list says power rails are not available in this size, while a note in the description mentions side power rails and advises dedicating an inner row to positive and another to negative. The safer reading is that it has no dedicated power rails, and you should confirm with the shop through chat before ordering if it matters for your project.

The item is new according to the listing, with a 1-month warranty. The box contains a single breadboard with 170 tie points.

Suitable for

  • Small trial circuits around a single chip
  • Side add-on next to an Arduino or ESP32 board
  • Training workshops and short student projects
  • Quickly testing sensors and voltage dividers

Seller's description

بردبورد صغير بـ170 نقطة توصيل وخطوة قياسية 2.54mm، يسمح ببناء الدوائر واختبارها دون لحام. الصفوف الداخلية موصولة أفقياً بمجموعات من خمس نقاط على جانبي الأخدود الأوسط، والأخدود مصمَّم ليستقبل شرائح DIP. حجمه الصغير يجعله مثالياً للدوائر البسيطة وللمشاريع التي تحتاج بردبورداً ملحقاً بجانب اللوحة الرئيسية.

أبرز المزايا

  • 170 نقطة توصيل في مساحة صغيرة جداً
  • خطوة 2.54mm متوافقة مع كل المكونات القياسية
  • أخدود مركزي يستقبل شرائح DIP دون قِصَر بين الصفين
  • مشابك نحاسية داخلية تتحمّل الإدخال والإخراج المتكرر
  • لاصق على الظهر لتثبيته على قاعدة أو علبة المشروع
  • لا يحتاج لحاماً فتبقى المكونات صالحة لإعادة الاستخدام

الاستخدامات الشائعة

  • دوائر تجريبية صغيرة حول شريحة واحدة
  • ملحق جانبي بجوار لوحة Arduino أو ESP32
  • ورش التدريب والمشاريع الطلابية القصيرة
  • اختبار الحساسات ومقسّمات الجهد بسرعة

ملاحظة: لا يخلو هذا البردبورد من ريلات تغذية جانبية، لذا خصّص صفاً داخلياً للموجب وآخر للسالب. تجنّب الأسلاك السميكة فوق 20AWG لأنها توسّع المشابك وتُفقدها التماس.

What's in the box

بردبورد واحد بـ170 نقطة توصيل

Specifications

Tie points170 نقطة
Hole pitch2.54mm قياسية
Power railsغير متوفرة في هذا المقاس
Row groupingخمس نقاط متصلة في كل صف
Body materialبلاستيك ABS
Suitable wireمن 22AWG إلى 24AWG صلب
الأخدود المركزيمخصص لشرائح DIP
مادة المشابكنحاس فوسفوري مطلي
التثبيتشريط لاصق على الوجه الخلفي
اللحامغير مطلوب
قابلية إعادة الاستخدامعالية، المكونات تُنزع دون تلف
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0220

Questions about بردبورد صغير بـ170 نقطة توصيل بخطوة 2.54mm | Mini Solderless Breadboard 170 Tie-Points

It currently costs 2,275 IQD (was 3,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
170 tie points according to the listing.
The listing's features say they are not available in this size, but the description mentions side rails, so confirm with the shop through chat.
Solid wire from 22AWG to 24AWG; avoid anything thicker than 20AWG.
No, the listing states soldering is not required.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.