Micro SD module

وحدة قراءة بطاقة Micro SD بواجهة SPI للمتحكمات | Micro SD Card Storage Expansion Module (SPI)

⁨وحدة قراءة بطاقة Micro SD بواجهة SPI للمتحكمات | Micro SD Card Storage Expansion Module (SPI)⁩ — ⁨3,188 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • SPI reading and writing of Micro SD cards
  • 5V or 3.3V supply with built-in 3.3V regulator
  • FAT16 and FAT32 file systems
  • Cards up to 32GB
  • No memory card in the box
3,188IQD3,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

3,188IQD

Its price has held at 3,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Micro SD card reader and writer module for microcontrollers over SPI, powered from 5V or 3.3V and supporting cards up to 32GB.

This is a small expansion board that lets microcontrollers read from and write to a Micro SD card over an SPI interface, adding storage to any project such as long-term sensor logging. The board has a 3.3V voltage regulator and a logic level conversion circuit that accepts 5V signals, so it can be powered from 5V or 3.3V DC and run from a 5V board such as an Arduino Uno without harming the card, according to the listing.

It supports the FAT16 and FAT32 file systems and Micro SD cards up to 32GB, which means a card larger than 32GB may not work with it. Format the card as FAT32 before use. It works with the SD and SdFat libraries in the Arduino IDE, and the listing mentions Arduino and ESP32 use.

Uses named in the listing include logging sensor readings over time, storing audio and image files, saving device settings and error logs after power loss, and moving data to a computer via the card. The box contents are one reader module without a memory card. The item is new and the stated warranty is 1 month.

Suitable for

  • Logging sensor readings over time
  • Storing audio and image files in projects
  • Saving settings and error logs after power loss
  • Moving data from a project to a computer

Seller's description

لوحة توسعة صغيرة تتيح للمتحكمات الدقيقة قراءة بطاقة Micro SD والكتابة عليها عبر ناقل SPI، فتضيف سعة تخزين كبيرة ورخيصة لأي مشروع. تحمل اللوحة منظّم فولتية 3.3V ودائرة تحويل مستويات المنطق، لذلك يمكن تغذيتها وتشغيلها من لوحة 5V مثل Arduino Uno دون إتلاف البطاقة. تعمل مع مكتبة SD القياسية بأسطر برمجية قليلة، وتُعد الحل الأول لتسجيل القراءات على المدى الطويل.

أبرز المزايا

  • واجهة SPI بأربعة خطوط (CS, SCK, MOSI, MISO) تتوافق مع أغلب المتحكمات
  • منظّم 3.3V ومحوّل مستويات مدمجان يسمحان بالتغذية من 5V أو 3.3V
  • تدعم نظامي الملفات FAT16 و FAT32 وبطاقات حتى 32GB
  • حاملة بطاقة من نوع push-push تثبّت البطاقة وتحرّرها بضغطة واحدة
  • تعمل مباشرة مع مكتبتي SD و SdFat في Arduino و ESP32
  • تكلفة تخزين أقل بكثير من ذاكرة EEPROM الخارجية لكل كيلوبايت

الاستخدامات الشائعة

  • تسجيل قراءات الحساسات مع الوقت (Data Logging)
  • تخزين ملفات الصوت والصور للوحات العرض والمشغّلات
  • حفظ إعدادات الجهاز وسجلات الأخطاء بعد انقطاع التغذية
  • نقل البيانات من المشروع إلى الحاسبة عبر البطاقة مباشرة

ملاحظة: هيّئ البطاقة بنظام FAT32 قبل الاستعمال، وغذِّ اللوحة من مصدر يتحمّل اندفاع التيار لحظة الكتابة؛ فالتغذية الضعيفة والأسلاك الطويلة هما أكثر أسباب فشل تهيئة البطاقة شيوعاً.

What's in the box

وحدة قراءة بطاقة Micro SD واحدة بدون بطاقة ذاكرة.

Specifications

InterfaceSPI
Supply voltage5V أو 3.3V DC
Regulationمنظّم 3.3V مدمج على اللوحة
File systemsFAT16 / FAT32
Supported capacityبطاقات Micro SD حتى 32GB
Pins6 أطراف (GND, VCC, MISO, MOSI, SCK, CS) بمسافة 2.54mm
الوظيفةقارئ وكاتب بطاقة Micro SD للمتحكمات الدقيقة
مستويات المنطقدائرة تحويل مدمجة تقبل إشارات 5V
نوع الحاملةpush-push مع قفل ميكانيكي للبطاقة
المكتبات المدعومةSD و SdFat في Arduino IDE
استهلاك التياريرتفع لحظياً أثناء عمليات الكتابة
التركيبفتحتا تثبيت على طرفي اللوحة
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0533

Questions about وحدة قراءة بطاقة Micro SD بواجهة SPI للمتحكمات | Micro SD Card Storage Expansion Module (SPI)

It currently costs 3,188 IQD (was 3,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
Yes, the listing says the built-in regulator and level shifter allow 5V or 3.3V supply, with Arduino Uno given as an example.
Micro SD cards up to 32GB; a larger card may not work.
No, the box contents are one reader module without a memory card.
The SD and SdFat libraries in the Arduino IDE, according to the listing.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.