GenericStepper motor driver

محرك تحكم TMC2225 للطابعات ثلاثية الأبعاد و CNC | Stepper Motor Driver

⁨محرك تحكم TMC2225 للطابعات ثلاثية الأبعاد و CNC | Stepper Motor Driver⁩ — ⁨8,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • TMC2225 stepper motor driver
  • Made for 3D printers and CNC
  • Described as Silent in its name
  • New, with a 1-month warranty
8,750IQD12,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

8,750IQD

Its price has held at 12,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

TMC2225 stepper motor driver module made for 3D printers and CNC machines, described as Silent in its name.

The TMC2225 is a driver made for stepper motors: a module that receives control signals from a printer or machine board and passes them on to the stepping motor. The listing gives the full name as TMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module.

The listing assigns it to 3D printers and CNC machines and describes it with the word Silent, but it does not state the noise level, the maximum current, the operating voltage or the pin layout. So check that your control board accepts a driver of this model with the same port arrangement before ordering; compatibility depends on your board, not on the name alone.

When installing, switch the power off completely and never fit or remove the driver while the machine is running, and follow the instructions for your control board. The item is new according to the listing, one piece is in the box, and it has a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Driving stepper motors in a 3D printer
  • Replacing a driver in a CNC machine
  • Motion-control projects

Seller's description

محرك تحكم TMC2225 للطابعات ثلاثية الأبعاد و CNC | Stepper Motor Driver

يُعد TMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module 012667 خياراً عملياً لمن يبحث عن قطعة إلكترونية محددة للاستخدام في أعمال الصيانة أو التجميع أو تنفيذ المشاريع الإلكترونية. جرى إبقاء رقم الموديل والبيانات الأساسية كما هي لتسهيل المقارنة والبحث، لذلك يُنصح بمراجعة الاسم والصور والمقاسات ونوع التوصيل بعناية والتأكد من توافقها مع التطبيق المطلوب قبل الطلب.

بحسب بيانات المنتج، TMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module درايفر مخصص لمحركات الستيبر.

للحصول على نتيجة مستقرة، افصل التغذية الكهربائية قبل التركيب واتبع مخطط الجهاز أو تعليمات المصنع عند توفرها. راعِ اتجاه التوصيل والقطبية والجهد والتيار والقدرة الحرارية بحسب نوع القطعة، ولا تعتمد على الشكل الخارجي وحده عند الاستبدال. إذا كان المنتج سيُستخدم كبديل لقطعة قديمة، فقارن رقم الجزء وترتيب الأطراف والأبعاد ونقاط التثبيت أولاً.

معلومات تساعدك على الاختيار

  • اسم القطعة: TMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module 012667
  • رموز البحث والموديل: TMC2225، Stepper، Motor، Driver، Silent
  • التصنيف: Motor Drivers، New products
  • الخيارات المتاحة: كما تظهر في صفحة المنتج
  • قبل الشراء: طابق المواصفات والصور مع الجهاز أو الدائرة المستهدفة.

المنتج مناسب للمختصين والهواة الذين يعرفون متطلبات دائرتهم أو جهازهم. احتفظ ببيانات الموديل أثناء الطلب، وعند الشك أرسل لنا صورة القطعة القديمة أو مخطط التوصيل حتى يمكن تدقيق التوافق بشكل أفضل. السعر والكمية والخيارات النهائية تظهر في صفحة المنتج وقت الطلب.

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من TMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module.

Specifications

BrandGeneric
ModelTMC2225
TypeStepper Motor Driver
DescriptionSilent
Intended use3D Printer & CNC
الموديل أو اسم القطعةTMC2225 Stepper Motor Driver Silent 3D Printer & CNC Motor Controller Module
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-XE2602FA3184

Questions about محرك تحكم TMC2225 للطابعات ثلاثية الأبعاد و CNC | Stepper Motor Driver

It currently costs 8,750 IQD (was 12,500 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
The listing assigns it to 3D printers and CNC machines, and to stepper motors.
The listing does not name specific compatible boards. Ask the shop through chat and give your board's model.
The listing does not specify it, so ask the shop through chat.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.