RFID reader kit

طقم قارئ بطاقات RFID موديل MFRC-522 | MFRC-522 RFID Reader Sensor Module Kit with Card and Tag

⁨طقم قارئ بطاقات RFID موديل MFRC-522 | MFRC-522 RFID Reader Sensor Module Kit with Card and Tag⁩ — ⁨4,888 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • MFRC-522 chip at 13.56 MHz
  • SPI interface to the microcontroller
  • Reads and writes MIFARE cards
  • Card and key tag included
  • Runs on 3.3 volts only
4,888IQD5,750IQDخصم 15%In stock
1

Ask about stock or request a better price

Price

4,888IQD

Its price has held at 5,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

RFID reader kit with the MFRC-522 chip, 13.56 MHz frequency and SPI interface, supplied with a card and key tag for testing.

This RFID reader kit is built around the MFRC-522 chip running at 13.56 MHz and comes with a card and a key tag for testing. It connects to a microcontroller over an SPI interface and reads and writes MIFARE cards (the listing names MIFARE Classic and others), making it a practical base for home-built access control and attendance projects.

The effective reading distance is only a few centimetres according to the listing, which is intentional in access control because the user has to bring the card close deliberately rather than the door opening for anyone walking past with a card. The listed library is MFRC522 for Arduino, and the listing mentions ready-made libraries for Arduino and ESP32.

An important warning from the listing: the module runs on 3.3 volts only, and connecting 5 volts to the VCC pin damages the chip, while the SPI pins tolerate 5 volt levels on most versions. It suits door systems, attendance tracking, identification projects, and education and IoT workshops. The item is new with a 1 months warranty, and the box holds the reader module with a card and key tag.

Suitable for

  • Access control and door systems
  • Attendance tracking systems
  • Identification projects
  • Education and IoT workshops

Seller's description

طقم قارئ RFID مبني على رقاقة MFRC-522 يعمل على تردد 13.56 ميجاهرتز، ويأتي مع بطاقة ومفتاح معلّق للاختبار. يتصل بالميكروكونترولر عبر واجهة SPI، ويقرأ ويكتب على بطاقات MIFARE، ما يجعله الأساس العملي لأي مشروع تحكم بالدخول أو تسجيل حضور منزلي الصنع. المسافة الفعّالة للقراءة بضعة سنتيمترات فقط، وهذا مقصود في أنظمة التحكم بالدخول: يجب أن يقرّب المستخدم بطاقته عمداً بدل أن يفتح الباب لكل من يمرّ قربه حاملاً بطاقة.

أبرز المزايا

  • يقرأ ويكتب على بطاقات MIFARE
  • تردد 13.56 ميجاهرتز القياسي
  • واجهة SPI سهلة التوصيل بالميكروكونترولر
  • بطاقة ومفتاح معلّق مرفقان للاختبار
  • مكتبات جاهزة لـArduino وESP32

الاستخدامات الشائعة

  • أنظمة التحكم بالدخول والأبواب
  • أنظمة تسجيل الحضور
  • مشاريع الهوية والتعريف
  • التعليم وورش إنترنت الأشياء

ملاحظة: الوحدة تعمل على 3.3 فولت فقط؛ توصيل 5 فولت إلى طرف VCC يتلف الرقاقة، أما أطراف SPI فتتحمل مستوى 5 فولت في أغلب النسخ.

What's in the box

وحدة قارئ MFRC-522 مع بطاقة ومفتاح معلّق

Specifications

ChipMFRC-522
Frequency13.56 ميجاهرتز
InterfaceSPI
Operating voltage3.3 فولت
Supported cardsMIFARE Classic وغيرها
Functionsقراءة وكتابة
Included accessoriesبطاقة ومفتاح معلّق
النوعقارئ وكاتب بطاقات RFID
المكتباتMFRC522 لـArduino
التنبيهلا تُغذّى بـ5 فولت
CategorySmart Home, IoT & Connected Appliances
More categoriesIoT modules and developer kits
ConditionNew
Warranty1-month warranty
SKUNTK-0798

Questions about طقم قارئ بطاقات RFID موديل MFRC-522 | MFRC-522 RFID Reader Sensor Module Kit with Card and Tag

It currently costs 4,888 IQD (was 5,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
No, the listing warns the module runs on 3.3 volts only and that 5 volts on the VCC pin damages the chip.
The MFRC-522 reader module with a card and key tag, according to the listing.
The listing says the reading distance is only a few centimetres.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.