NTC thermistor sensor

حساس حرارة ثيرمستور NTC طراز MF52 بقيمة 10K ومعامل B3950 | MF52 NTC Thermistor 10kΩ B3950 — Epoxy-Coated Axial Temperature Sensor

⁨حساس حرارة ثيرمستور NTC طراز MF52 بقيمة 10K ومعامل B3950 | MF52 NTC Thermistor 10kΩ B3950 — Epoxy-Coated Axial Temperature Sensor⁩ — ⁨1,750 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • 10kΩ at 25°C
  • B3950 beta value
  • Epoxy coating with axial leads for THT
  • Temperature range -40°C to +125°C
  • New, with a 1 months warranty
1,750IQD2,500IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

1,750IQD

Its price has held at 2,500 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Epoxy-coated MF52 NTC thermistor, 10kΩ with B3950, for temperature sensing in printers, battery packs and thermal control.

This is a negative temperature coefficient (NTC) thermistor from the epoxy-coated MF52 family, rated 10kΩ at 25°C with a B3950 beta value. Its resistance falls as temperature rises along a known curve, reaching about 3.6kΩ at 50°C and about 700Ω at 100°C, and it is normally read through a voltage divider with a fixed 10kΩ resistor to an ADC input.

The 10kΩ value at 25°C is the most widely supported in libraries and ready-made control boards, according to the listing, and the standard B3950 beta value makes temperature easy to calculate with the Steinhart-Hart or beta equation. The temperature range is -40°C to +125°C, and the small epoxy coating gives a quick response to temperature changes, faster in liquids than in air.

It has no polarity so it can be connected either way, and its axial leads are for THT through-hole mounting. Keep the measuring current small, because dissipation is only a few milliwatts and a larger current self-heats the bead and distorts the reading. Insulate the leads with heat-shrink tubing before gluing the bead to a metal surface to prevent a short.

The listed uses are measuring heated-bed and print head temperature, monitoring lithium battery pack temperature inside systems, thermal control and cooling-fan circuits, and temperature sensors in household appliances and power supplies. The item is new with a 1 months warranty, and the box holds one MF52 NTC thermistor.

Suitable for

  • Heated-bed temperature sensing in printers
  • Monitoring lithium battery pack temperature
  • Thermal control and cooling-fan circuits

Seller's description

ثيرمستور ذو معامل حراري سالب NTC من عائلة MF52 المغلّفة بالإيبوكسي، مقاومته 10kΩ عند 25°C ومعامل بيتا B3950. تنخفض مقاومته كلما ارتفعت الحرارة وفق منحنى معروف، فتصل إلى نحو 3.6kΩ عند 50°C ونحو 700Ω عند 100°C، ويُقرأ عادة عبر مجزئ فولتية بمقاومة 10kΩ ثابتة إلى مدخل ADC.

أبرز المزايا

  • قيمة 10kΩ عند 25°C وهي الأكثر دعماً في المكتبات ولوحات التحكم الجاهزة
  • معامل بيتا B3950 قياسي يسهّل حساب الحرارة بمعادلة Steinhart-Hart أو بيتا
  • غلاف إيبوكسي صغير يعطي استجابة سريعة لتغيّر الحرارة
  • لا يحتاج دائرة تكييف إشارة معقدة، مجرد مقاومة واحدة ومدخل ADC
  • بلا قطبية، يمكن توصيله بأي اتجاه
  • سعر منخفض يسمح باستخدام عدة نقاط قياس في المشروع نفسه

الاستخدامات الشائعة

  • قياس حرارة الطاولة الساخنة ورأس الطابعات ثلاثية الأبعاد
  • مراقبة حرارة حزم بطاريات الليثيوم داخل الأنظمة
  • دوائر التحكم الحراري وتشغيل مراوح التبريد
  • حساسات الحرارة في الأجهزة المنزلية ومزودات الطاقة

ملاحظة: أبقِ تيار القياس صغيراً لتفادي التسخين الذاتي الذي يزيّف القراءة، واعزل الطرفين بأنبوب حراري قبل لصق الحبة على سطح معدني لمنع القصر الكهربائي.

What's in the box

ثيرمستور NTC واحد من طراز MF52

Specifications

Nominal resistance at 25°C10kΩ
Beta valueB3950 (B25/50)
Temperature coefficientسالب (NTC)
Temperature range-40°C إلى +125°C
Package typeMF52 مغلّف بالإيبوكسي
المقاومة عند 50°Cنحو 3.6kΩ حسب منحنى B3950
المقاومة عند 100°Cنحو 700Ω حسب منحنى B3950
التركيبطرفان محوريان عبر الثقوب THT
القطبيةلا يوجد، يمكن توصيله بأي اتجاه
طريقة القراءةمجزئ فولتية مع مقاومة 10kΩ ثابتة إلى ADC
قدرة التبديدملي واطات قليلة فقط، يجب إبقاء تيار القياس صغيراً
زمن الاستجابةسريع بسبب صغر الحبة، وأسرع داخل السوائل منه في الهواء
الاستخدام النموذجيالطابعات ثلاثية الأبعاد وحزم البطاريات والتحكم الحراري
CategorySemiconductors, ICs & Electronic Components
More categoriesPassive electronic components
ConditionNew
Warranty1-month warranty
SKUNTK-0081

Questions about حساس حرارة ثيرمستور NTC طراز MF52 بقيمة 10K ومعامل B3950 | MF52 NTC Thermistor 10kΩ B3950 — Epoxy-Coated Axial Temperature Sensor

It currently costs 1,750 IQD (was 2,500 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
10kΩ at 25°C with a B3950 beta value, according to the listing.
About 3.6kΩ at 50°C and about 700Ω at 100°C along the B3950 curve.
Through a voltage divider with a fixed 10kΩ resistor to an ADC input, according to the listing.
No, it can be connected either way.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.