MechanicSolder paste
معجون قصدير لحام Mechanic XG50 نوع Sn63Pb37 بوزن 35g | Mechanic XG50 Solder Paste Sn63Pb37 35g
معجون قصدير لحام Mechanic XG50 نوع Sn63Pb37 بوزن 35g | Mechanic XG50 Solder Paste Sn63Pb37 35g — 7,650 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- Sn63Pb37 alloy with built-in flux
- Melting point 183°C
- 35g tub with tight lid
- For hot air or soldering iron
- New, with a 1-month warranty
Ask about stock or request a better price
Price
7,650IQDIts price has held at 8,500 IQD for the last 11 days.
About this item
Mechanic XG50 solder paste in Sn63Pb37 alloy with built-in flux, 35g, for SMD parts, BGA chips and board rework with hot air.
Mechanic XG50 is a solder paste in Sn63Pb37 alloy blended with flux in a single ready-to-use mix. A thin layer goes on the component legs or board pads and is then heated with hot air, so the solder melts and bonds in place. The alloy melts at 183°C and, according to the listing, solidifies with no pasty stage.
The consistency is tacky and holds the component in place before melting, and since it is a ready mix of solder and flux it needs no extra flux. The pack is 35g with a tight lid, and you can work with a hot air gun or a soldering iron. It suits fine SMD soldering, reworking BGA chips and multi-leg ICs, repairing phone and tablet boards, clearing bridges and reforming damaged joints.
Store the paste in a cool place in a tightly closed container, because exposure to air dries the flux and spoils the consistency. Do not raise hot air above 300°C on thin boards so the pads do not lift. The paste contains lead, so work with good ventilation. It is new with a 1-month warranty, and the box holds one tub.
Suitable for
- Soldering fine SMD parts
- BGA and IC rework
- Phone and tablet board repair
Seller's description
معجون لحام من Mechanic بسبيكة Sn63Pb37 معجونة مع الفلكس في خليط واحد جاهز للاستخدام. توضع طبقة رقيقة منه على أرجل المكوّن أو على وسائد اللوحة ثم يُسخَّن بالهواء الساخن فينصهر القصدير ويلتحم في مكانه. هو الطريقة العملية لتثبيت العناصر السطحية الدقيقة وشرائح BGA وإعادة عمل اللوحات.
أبرز المزايا
- سبيكة Sn63Pb37 تنصهر عند 183°C وتتصلّب بلا مرحلة عجينية
- خليط جاهز من القصدير والفلكس لا يحتاج فلكس إضافي
- قوام لزج يثبّت المكوّن في مكانه قبل التسخين
- عبوة 35g بغطاء محكم تكفي لعدد كبير من الأعمال
- مناسب للعمل بمسدس الهواء الساخن أو بمكواة اللحام
الاستخدامات الشائعة
- لحام العناصر السطحية SMD الدقيقة على اللوحات
- إعادة عمل شرائح BGA وIC متعددة الأرجل
- صيانة لوحات الموبايل والأجهزة اللوحية
- سد الجسور وإعادة تشكيل نقاط اللحام التالفة
ملاحظة: يُحفظ المعجون في مكان بارد ومغلق فتعرضه للهواء يجفف الفلكس ويفسد قوامه. ولا ترفع حرارة الهواء الساخن فوق 300°C على اللوحات الرقيقة حتى لا تتقشر الوسائد.
What's in the box
علبة واحدة من معجون اللحام Mechanic XG50 بوزن 35g
Specifications
| Brand | Mechanic |
|---|---|
| Model | XG50 |
| Alloy | Sn63Pb37 |
| Melting point | 183°C |
| Weight | 35g |
| Suitable for | SMD وBGA وإعادة عمل اللوحات |
| نوع المنتج | معجون لحام (Solder Paste) بفلكس مدمج |
| طريقة الاستخدام | هواء ساخن أو مكواة لحام |
| القوام | لزج يثبّت المكوّن قبل الانصهار |
| التخزين | مكان بارد وعبوة محكمة الإغلاق |
| احتياط السلامة | يحتوي رصاصًا - يلزم تهوية جيدة |
| Category | Manufacturing, Maker, Lab & Test Equipment |
| More categories | Lab power supplies and measurement instruments |
| Condition | New |
| Warranty | 1-month warranty |
| SKU | NTK-0544 |



