Solderless breadboard

بردبورد MB-102 بـ830 نقطة توصيل | MB-102 Solderless Breadboard, 830 Tie Points with Power Rails

⁨بردبورد MB-102 بـ830 نقطة توصيل | MB-102 Solderless Breadboard, 830 Tie Points with Power Rails⁩ — ⁨2,975 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Full-size with 830 tie points
  • 630 main points and 200 on the rails
  • 4 side power rails
  • 2.54mm pitch and DIP center channel
  • New, with a 1-month warranty
2,975IQD4,250IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

2,975IQD

Its price has held at 4,250 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

Learn more

About this item

Full-size MB-102 breadboard with 830 tie points and four power rails, for building and testing circuits without soldering.

The MB-102 breadboard is a full-size experimenter board with 830 tie points, split into 630 points in the main area and 200 points on the four power rails. It lets you build and test a circuit by pushing components and wires straight into the holes, with no soldering and no custom PCB design.

The hole pitch is 2.54mm, the standard spacing that suits common components and chips. The center channel accommodates DIP chips of different lengths, so you place the chip across it and each side's pins connect to separate rows. The four power rails on the sides are meant for positive and negative lines, which makes it easier to distribute power across the circuit.

The contact clips are plated phosphor bronze and the body is ABS plastic. The edges are notched so more than 1 board can be joined side by side to build larger circuits. The back carries an adhesive strip for mounting the board on a wooden or metal base. The recommended current is up to about 1A per track, and the suitable wire is 22AWG solid wire.

Listed uses include full Arduino, ESP32 and Raspberry Pi projects, teaching circuits in university labs, prototyping before designing the printed board, and testing power modules, amplifiers and sensors together. The listing notes that on some copies of the MB-102 the power rails are split in the middle, so check with an ohmmeter and bridge both halves with a short wire if needed, and avoid thick leads because they widen the clips.

The item is new according to the listing, with a 1-month warranty. The box contains one MB-102 breadboard with 830 tie points.

Suitable for

  • Arduino, ESP32 and Raspberry Pi projects
  • Teaching circuits in labs
  • Prototypes before designing the printed board
  • Testing sensors, amplifiers and power modules

Seller's description

بردبورد MB-102 هو المقاس الكامل الأشهر في مشاريع الإلكترونيات، ويضم 830 نقطة توصيل موزّعة على 630 نقطة في المنطقة الرئيسية و200 نقطة على ريلات التغذية الأربعة. الخطوة 2.54mm والأخدود المركزي يستوعبان شرائح DIP بمختلف الأطوال، والحواف المسننة تسمح بضم عدة لوحات لبناء دوائر أكبر دون لحام أو تصميم PCB.

أبرز المزايا

  • 830 نقطة توصيل تكفي مشروعاً كاملاً بعدة شرائح
  • أربعة ريلات تغذية جانبية للموجب والسالب على الجهتين
  • خطوة 2.54mm تستوعب كل المكونات والشرائح القياسية
  • مشابك نحاس فوسفوري تحافظ على التماس بعد آلاف الإدخالات
  • حواف مسننة لربط عدة لوحات جنباً إلى جنب
  • لاصق خلفي للتثبيت على قاعدة خشبية أو معدنية

الاستخدامات الشائعة

  • مشاريع Arduino وESP32 والراسبيري باي الكاملة
  • دوائر تعليمية في مختبرات الجامعات
  • نماذج أولية قبل تصميم اللوحة المطبوعة
  • اختبار وحدات الطاقة والمكبرات والحساسات معاً

ملاحظة: ريلات التغذية في MB-102 مقطوعة في المنتصف في بعض النسخ، لذا تحقق بالأومميتر ووصّل الجزأين بسلك قصير إن لزم. استعمل سلكاً صلباً 22AWG وتجنّب الأطراف السميكة.

What's in the box

بردبورد MB-102 واحد بـ830 نقطة توصيل

Specifications

ModelMB-102
Tie points830 نقطة إجمالاً
Point distribution630 نقطة رئيسية و200 نقطة على ريلات التغذية
Hole pitch2.54mm قياسية
Power railsأربعة ريلات على الجانبين
Body materialبلاستيك ABS
Recommended currentحتى نحو 1A لكل مسار
Wire sizeسلك صلب 22AWG
الأخدود المركزييستوعب شرائح DIP بمختلف الأطوال
مادة المشابكنحاس فوسفوري مطلي
الحوافمسننة لضم عدة لوحات
التثبيتشريط لاصق على الوجه الخلفي
اللحامغير مطلوب
CategorySemiconductors, ICs & Electronic Components
More categoriesPrinted circuit boards
ConditionNew
Warranty1-month warranty
SKUNTK-0080

Questions about بردبورد MB-102 بـ830 نقطة توصيل | MB-102 Solderless Breadboard, 830 Tie Points with Power Rails

It currently costs 2,975 IQD (was 4,250 IQD) from Nanotik on SinaaStore (updated 17 November 2026).
830 points: 630 in the main area and 200 on the power rails.
No, the listing states that soldering is not required.
22AWG solid wire according to the listing; avoid thick leads.
The listing warns they are split in the middle on some copies, so check with an ohmmeter and bridge the halves with a short wire if needed.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.