GenericCNC controller board

لوحة تحكم CNC ثلاثية المحاور GRBL 32bit 4.0 KFYLGW595 | CNC Controller Board

⁨لوحة تحكم CNC ثلاثية المحاور GRBL 32bit 4.0 KFYLGW595 | CNC Controller Board⁩ — ⁨62,000 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Three-axis GRBL CNC controller board
  • 32bit processor, version 4.0
  • Operating voltage of 12 to 48 volts
  • USB Type-C port
  • New, with a 1 months warranty
62,000IQDIn stock
1

Ask about stock or request a better price

Price

62,000IQD

Its price has held at 62,000 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

Three-axis GRBL CNC controller board with a 32bit processor, version 4.0, for desktop CNC machines and laser engravers.

This is a three-axis (3-Axis) CNC controller board running GRBL on a 32bit processor, version 4.0, with the code KFYLGW595. The listing describes it as being for desktop machines such as the 3018 and PRO series and for laser engravers. The 32-bit architecture instead of the traditional 8-bit gives, according to the listing, higher processing speed and smoother motion.

The stated specs: an operating voltage of 12 to 48 volts DC, support for a spindle motor of up to 500 watts at 24 or 48 volts, and a USB Type-C data port. The listing also mentions support for two independent Y-axis motors to keep that axis balanced. Before buying, make sure your power supply and motors fall within these ranges.

The board is an electronic part for specialists and hobbyists, so match your machine's specs and connection type to it. Disconnect the power before installation. The listing does not give the dimensions or a detailed port count, so ask the shop through chat if needed. Box contents: one piece. The item is new with a 1 months warranty against manufacturing operating defects, and the warranty does not cover misuse.

Suitable for

  • Controlling desktop CNC machines
  • Upgrading the controller of laser engravers
  • Hobby CNC projects

Seller's description

لوحة تحكم CNC ثلاثية المحاور GRBL 32bit 4.0 KFYLGW595 | CNC Controller Board

يُعد CNC Controller 3-Axis GRBL 32bit 4.0 CNC Control Board KFYLGW595 #GG خياراً عملياً لمن يبحث عن قطعة إلكترونية محددة للاستخدام في أعمال الصيانة أو التجميع أو تنفيذ المشاريع الإلكترونية. جرى إبقاء رقم الموديل والبيانات الأساسية كما هي لتسهيل المقارنة والبحث، لذلك يُنصح بمراجعة الاسم والصور والمقاسات ونوع التوصيل بعناية والتأكد من توافقها مع التطبيق المطلوب قبل الطلب.

بحسب بيانات المنتج، CNC Controller 3، Axis GRBL 32bit 4.0 CNC Control Board تُعد لوحة التحكم CNC 3، Axis GRBL 32، bit 4.0 ترقية حديثة وقوية لأجهزة الـ CNC المكتبية (مثل سلسلة 3018، PRO) وأجهزة النقش بالليزر. الاعتماد على معمارية 32 بت بدلاً من 8 بت التقليدية يمنح الماكينة سرعة معالجة أعلى وحركة أكثر سلاسة. [1, 2] المواصفات الفنية الأساسية: المعالج: معالج 32، bit متطور يوفر استجابة سريعة جداً للأوامر ويقلل من الاهتزازات أثناء التشغيل السريع. [1, 3] جهد التشغيل: تدعم نطاقاً واسعاً من الطاقة يتراوح بين 12 فولت إلى 48 فولت تيار مستمر (DC). [1, 2] دعم المحرك المغزلي (Spindle): يمكنها تشغيل محركات Spindle تصل قدرتها إلى 500 واط بجهد 24، 48 فولت. [1, 4] منفذ البيانات: تستخدم منفذ USB Type، C، وهو أكثر استقراراً في نقل البيانات من المنافذ القديمة. [1, 2] المميزات الرئيسية: محرك مزدوج لمحور Y: تدعم اللوحة توصيل محركين لمحور Y بشكل مستقل، مما يضمن توازناً تاماً وحركة دقيقة للمحور دون انحراف. [1, 2] التشغيل دون كمبيو.

للحصول على نتيجة مستقرة، افصل التغذية الكهربائية قبل التركيب واتبع مخطط الجهاز أو تعليمات المصنع عند توفرها. راعِ اتجاه التوصيل والقطبية والجهد والتيار والقدرة الحرارية بحسب نوع القطعة، ولا تعتمد على الشكل الخارجي وحده عند الاستبدال. إذا كان المنتج سيُستخدم كبديل لقطعة قديمة، فقارن رقم الجزء وترتيب الأطراف والأبعاد ونقاط التثبيت أولاً.

معلومات تساعدك على الاختيار

  • اسم القطعة: CNC Controller 3-Axis GRBL 32bit 4.0 CNC Control Board KFYLGW595 #GG
  • رموز البحث والموديل: CNC، Controller، 3-Axis، GRBL، 32bit
  • التصنيف: CNC controller، New products
  • الخيارات المتاحة: كما تظهر في صفحة المنتج
  • قبل الشراء: طابق المواصفات والصور مع الجهاز أو الدائرة المستهدفة.

المنتج مناسب للمختصين والهواة الذين يعرفون متطلبات دائرتهم أو جهازهم. احتفظ ببيانات الموديل أثناء الطلب، وعند الشك أرسل لنا صورة القطعة القديمة أو مخطط التوصيل حتى يمكن تدقيق التوافق بشكل أفضل. السعر والكمية والخيارات النهائية تظهر في صفحة المنتج وقت الطلب.

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من CNC Controller 3-Axis GRBL 32bit 4.0 CNC Control Board KFYLGW595 #GG.

Specifications

BrandGeneric
CodeKFYLGW595
Processor32bit
Operating voltage12 فولت إلى 48 فولت
Spindle power500 واط
الموديل أو اسم القطعةCNC Controller 3-Axis GRBL 32bit 4.0 CNC Control Board KFYLGW595 #GG
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X05D5F5A6290

Questions about لوحة تحكم CNC ثلاثية المحاور GRBL 32bit 4.0 KFYLGW595 | CNC Controller Board

It currently costs 62,000 IQD from Nanotik on SinaaStore (updated 16 November 2026).
From 12 to 48 volts DC, according to the listing.
A USB Type-C port, according to the listing.
Yes, the listing states support for spindle motors up to 500 watts at 24 or 48 volts.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.