GenericCAN Bus module
لوحة متحكم ناقل CAN Bus موديل MCP2515 مع مستقبل TJA1050 SPI | CAN Bus Driver Module
لوحة متحكم ناقل CAN Bus موديل MCP2515 مع مستقبل TJA1050 SPI | CAN Bus Driver Module — 5,525 IQD from Nanotik on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.
Sold by NanotikHighlights
- MCP2515 chip for the CAN protocol
- TJA1050 receiver included
- SPI interface to the controller
- Compatible with 51 MCU and ARM controllers
- New, with a 1 month warranty
Ask about stock or request a better price
Price
5,525IQDIts price has held at 6,500 IQD for the last 11 days.
Cash on delivery
Pay cash when the order reaches you — nothing upfront.
1-month warranty
ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Learn moreAbout this item
MCP2515 CAN Bus module with a TJA1050 receiver and SPI interface, for linking 51 MCU and ARM controllers in automotive and automation projects.
This is a CAN Bus controller module built around the MCP2515 chip and fitted with a TJA1050 receiver. Its English name in the listing is MCP2515 CAN Bus Driver Module Board TJA1050 Receiver SPI For 51 MCU ARM Controller Interface Module. It acts as a bridge between a microcontroller and a CAN network, adding communication over that protocol to a project without heavy programming complexity, according to the listing.
It talks to the controller over an SPI interface, which is common on most platforms and controllers used in electronics projects. The listing states compatibility with 51 MCU and ARM controllers. This type of board is used in automotive applications, industrial automation and distributed control systems, where data is exchanged in environments that may contain electrical noise.
When wiring, use good quality wires to reduce signal loss, connect the SPI pins carefully to your controller while respecting the operating voltage levels, check the software libraries that support the MCP2515 for the correct Baud Rate timing of your network, and provide a good shared ground between the board and the other devices on the network. The listing does not state the supply voltage or the board dimensions, so ask the shop through chat if you need them.
The item is new and the box contents list one module. The stated warranty is 1 month against factory operating defects, excluding misuse.
Suitable for
- Linking controllers to a CAN network in automotive applications
- Industrial automation and distributed control systems
- Development projects that need a CAN interface over SPI
Seller's description
لوحة متحكم ناقل CAN Bus موديل MCP2515
تعتبر لوحة MCP2515 CAN Bus Driver Module Board أداة أساسية للمطورين الذين يعملون على مشاريع تتطلب التواصل عبر بروتوكول CAN Bus. تم تجهيز هذه اللوحة بمستقبل TJA1050، مما يضمن نقل بيانات موثوقاً وسريعاً بين المتحكمات الدقيقة مثل 51 MCU أو ARM Controller. تعتمد اللوحة على واجهة SPI للاتصال، مما يجعلها سهلة الدمج مع معظم المنصات البرمجية والمتحكمات الشائعة في المشاريع الإلكترونية.
تستخدم هذه اللوحة بشكل رئيسي في تطبيقات السيارات، الأتمتة الصناعية، وأنظمة التحكم الموزعة حيث يتطلب الأمر تبادل البيانات في بيئات قد تكون مليئة بالضجيج الكهربائي. بفضل تصميمها المدمج، توفر اللوحة حلاً فعالاً لإضافة قدرات التواصل عبر CAN Bus إلى مشاريعك دون الحاجة إلى تعقيدات برمجية كبيرة، حيث تعمل كجسر بين المتحكم الدقيق وشبكة CAN.
إرشادات الاستخدام والربط
عند توصيل اللوحة، تأكد من استخدام أسلاك ذات جودة جيدة لتقليل فقدان الإشارة. يجب توصيل دبابيس واجهة SPI بدقة مع المتحكم الدقيق الخاص بك، مع مراعاة مستويات الجهد التشغيلي. يُنصح دائماً بمراجعة المكتبات البرمجية المتوافقة مع شريحة MCP2515 لضمان إعدادات التوقيت (Baud Rate) الصحيحة للشبكة التي ترغب في الاتصال بها. تأكد من توفير تأريض مشترك جيد بين اللوحة والأجهزة الأخرى في الشبكة لضمان استقرار نقل البيانات.
- تستخدم شريحة MCP2515 للتحكم في بروتوكول CAN.
- مجهزة بمستقبل TJA1050 لضمان جودة الإشارة.
- تعتمد واجهة SPI للاتصال مع المتحكمات.
- متوافقة مع متحكمات 51 MCU وARM.
- مثالية لتطبيقات الأتمتة والسيارات.
- تصميم مدمج يسهل دمجه في المشاريع.
الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية
What's in the box
قطعة واحدة من MCP2515 CAN Bus Driver Module Board TJA1050 Receiver SPI For 51 MCU ARM Controller Interface Module.
Specifications
| Brand | Generic |
|---|---|
| Model | MCP2515 CAN Bus Driver Module Board TJA1050 Receiver SPI For 51 MCU ARM Controller Interface Module |
| Chip | MCP2515 |
| Interface | SPI |
| Compatibility | متحكمات 51 MCU وARM |
| الحالة | جديد |
| الضمان | شهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية |
| Category | Smart Home, IoT & Connected Appliances |
| More categories | IoT modules and developer kits |
| Condition | New |
| Warranty | 1-month warranty |
| Warranty notes | ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام. |
| SKU | NANO-XB41D8FCD665 |




