GenericBattery protection board

لوحة حماية من التفريغ الزائد للبطارية عالمية 12V 24V 36V 48V | Battery Protection Board

⁨لوحة حماية من التفريغ الزائد للبطارية عالمية 12V 24V 36V 48V | Battery Protection Board⁩ — ⁨8,225 IQD⁩ from ⁨Nanotik⁩ on SinaaStore. New, 1-month warranty. Delivery anywhere in Iraq for 5,000 IQD, cash on delivery.

Sold by Nanotik

Highlights

  • Battery over-discharge protection
  • Supports 12V, 24V, 36V and 48V batteries
  • Load current up to 30 amps
  • Built-in buzzer
  • New, with a 1-month warranty
8,225IQD11,750IQDخصم 30%In stock
1

Ask about stock or request a better price

Price

8,225IQD

Its price has held at 11,750 IQD for the last 11 days.

Cash on delivery

Pay cash when the order reaches you — nothing upfront.

Delivery across Iraq

One flat 5,000 IQD fee for the whole order.

Learn more

1-month warranty

ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.

Learn more

About this item

Over-discharge protection board for 12V, 24V, 36V and 48V batteries, up to 30 amps of load current, with a built-in buzzer.

This is a protection board that prevents over-discharge of a battery: it cuts off the loads automatically when the battery voltage drops to a critical level, which preserves battery life and lowers the risk of damage. The listing names it 12V24V36V48V universal battery over discharge protection board low battery protection board.

According to the listing the board is compatible with 12V, 24V, 36V and 48V batteries and handles a load current of up to 30 amps. The description mentions uses such as solar power systems, backup systems and electric vehicles. It has a built-in buzzer that alerts the user when the battery approaches over-discharge. The listing states that the board reconnects the loads only after the circuit is disconnected and reset.

Before buying, identify your battery voltage and the current of the loads you will run, and make sure it stays within 30 amps. When installing, connect positive and negative correctly, mount the board somewhere dry and follow the included wiring diagram. The listing recommends fitting a circuit breaker between the board and the battery for extra protection. If the loads are cut off, check the battery voltage and charge it before restarting, and do not force the reconnection.

The item is new according to the listing, one piece is in the box, and it has a 1-month warranty against manufacturing operating defects, excluding misuse.

Suitable for

  • Protecting solar system batteries
  • Protecting backup system batteries
  • Protecting electric vehicle batteries

Seller's description

لوحة حماية البطارية من التفريغ الزائد

تعد لوحة حماية البطارية العالمية أداة أساسية للحفاظ على عمر البطاريات ومنع تلفها الناتج عن التفريغ الزائد. صُممت هذه اللوحة لتعمل مع مجموعة متنوعة من البطاريات بجهد 12 فولت، 24 فولت، 36 فولت، و48 فولت، مما يجعلها حلاً شاملاً لمختلف أنظمة الطاقة الشمسية، أنظمة النسخ الاحتياطي، والمركبات الكهربائية. تقوم اللوحة بفصل الأحمال تلقائياً عند انخفاض جهد البطارية إلى مستوى حرج، ولا تعيد توصيلها إلا بعد فصل الدائرة وإعادة ضبطها.

تتميز اللوحة باحتوائها على إنذار صوتي مدمج ينبه المستخدم عند اقتراب البطارية من حالة التفريغ الزائد. تتحمل اللوحة تيار حمل يصل إلى 30 أمبير، مما يوفر حماية كافية لمعظم التطبيقات المتوسطة. لضمان أعلى مستويات الأمان، يُنصح دائماً بتركيب قاطع دورة (Circuit Breaker) بين كارت الحماية والبطارية لتعزيز الحماية ضد أي تيارات مفاجئة أو أعطال في الدائرة.

إرشادات التركيب والتشغيل

عند تركيب لوحة الحماية، تأكد من توصيل أقطاب البطارية بشكل صحيح (الموجب والسالب) لتجنب تلف الدائرة. يجب تثبيت اللوحة في مكان جاف وبعيد عن الرطوبة لضمان استمرارية عمل المكونات الإلكترونية. عند حدوث فصل للأحمال، لا تحاول إعادة التوصيل القسري؛ بل قم بفحص جهد البطارية والتأكد من شحنها قبل إعادة تشغيل الدائرة. يفضل دائماً مراجعة مخطط التوصيل المرفق لضمان الربط الصحيح مع الأحمال والبطارية.

  • التوافق: بطاريات 12V, 24V, 36V, 48V
  • أقصى تيار حمل: 30 أمبير
  • المميزات: حماية من التفريغ الزائد
  • التنبيه: مزودة بإنذار صوتي
  • آلية العمل: فصل تلقائي للأحمال
  • نصيحة: يفضل ربط قاطع دورة للحماية الإضافية

الحالة والضمان: المنتج جديد ومشمول بضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية

What's in the box

قطعة واحدة من 12V24V36V48V universal battery over discharge protection board low battery protection board.

Specifications

BrandGeneric
Compatible batteriesبطاريات 12V, 24V, 36V, 48V
Max load current30 أمبير
Operationفصل تلقائي للأحمال
Alertمزودة بإنذار صوتي
الموديل أو اسم القطعة12V24V36V48V universal battery over discharge protection board low battery protection board
الحالةجديد
الضمانشهر واحد من متجر Nanotik ضد عيوب التشغيل المصنعية
CategorySemiconductors, ICs & Electronic Components
More categoriesElectromechanical components & connectors
ConditionNew
Warranty1-month warranty
Warranty notesضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
SKUNANO-X70F3D157038

Questions about لوحة حماية من التفريغ الزائد للبطارية عالمية 12V 24V 36V 48V | Battery Protection Board

It currently costs 8,225 IQD (was 11,750 IQD) from Nanotik on SinaaStore (updated 16 November 2026).
12V, 24V, 36V and 48V, according to the listing.
A load current of up to 30 amps.
The board reconnects only after the circuit is disconnected and reset, and the listing advises checking the battery voltage and charging it first.
Yes, Nanotik has it in stock. After you order, the shop calls you to confirm availability and your address before shipping.
It is new, as listed by the seller.
Yes, it comes with a 1-month warranty from Nanotik. The warranty is provided by the selling shop, not by SinaaStore. Warranty notes: ضمان متجر Nanotik لمدة شهر واحد ضد عيوب التشغيل المصنعية، ولا يشمل سوء الاستخدام.
Delivery to every governorate in Iraq costs a flat 5,000 IQD for the whole order, and you pay cash on delivery after checking the order with the driver. Nothing is paid upfront.
It is sold by Nanotik on SinaaStore, the online marketplace that brings together the shops of Baghdad's al-Sinaa Street and the rest of Iraq. Order it from this page and pay cash on delivery.